Anthropogenic greenhouse gases （GHG） emission and related global warming issues have been the focus of international communities for some time. The international communities have reached a consensus to reduce anthro...Anthropogenic greenhouse gases （GHG） emission and related global warming issues have been the focus of international communities for some time. The international communities have reached a consensus to reduce anthropogenic GHG emissions and restrain global warming. The quantitative assessment of anthropogenic GHG emissions is the scientific basis to find out the status of global GHG emission, identify the commitments of each country, and arrange the international efforts of GHG emission reduction. Currently the main assessment indicators for GHG emission include national indicator, per capita indicator, per GDP indicator, and international trade indicator etc. The introduction to the above indi- cators is put forward and their merits and demerits are analyzed. Based on the GHG emission data from the World Resource Institute （WRI）, the US Energy Information Administration （EIA）, and the Carbon Dioxide Information Analysis Center （CDIAC）, the results of each indictor are calculated for the world, for the eight G8 industrialized countries （USA, UK, Canada, Japan, Germany, France, Italy and Russia）, and the five major developing countries including China, Brazil, India, South Africa and Mexico. The paper points out that all these indicators have some limitations. The Indicator of Industrialized Accumulative Emission per Capita （IAEC） is put forward as the equitable indicator to evaluate the industrialized historical accumulative emission per capita of every country. IAEC indicator can reflect the economic achievement of GHG emission enjoyed by the current generations in every country and their commitments. The analysis of IAEC indicates that the historical accumulative emission per capita in indus- trialized countries such as UK and USA were typically higher than those of the world average and the developing countries. Emission indicator per capita per GDP, consumptive emission indicator and survival emission indicator are also put forward and discussed in the paper.展开更多
Al/Mg alloy multilayered composites were produced successfully at the lower temperature（280 C） by accumulative roll bonding（ARB） processing technique.The microstructures of Al and Mg alloy layers were characterize...Al/Mg alloy multilayered composites were produced successfully at the lower temperature（280 C） by accumulative roll bonding（ARB） processing technique.The microstructures of Al and Mg alloy layers were characterized by scanning electron microscopy and transmission electron microscopy.Vickers hardness and three-point bending tests were conducted to investigate mechanical properties of the composites.It is found that Vickers hardness,bending strength and stiffness modulus of the Al/Mg alloy multilayered composite increase with increasing the ARB pass.Delamination and crack propagation along the interface are the two main failure modes of the multilayered composite subjected to bending load.Strengthening and fracture mechanisms of the composite are analyzed.展开更多
The reliability and validity of risk assessment scale（RAS） of pressure sore during 3S surgery were investigated. RAS of pressure sore was designed independently during 3S surgery. Five operating room nursing experts...The reliability and validity of risk assessment scale（RAS） of pressure sore during 3S surgery were investigated. RAS of pressure sore was designed independently during 3S surgery. Five operating room nursing experts were selected to consult and detect face validity. Convenient and purposive sampling of 707 samples was conducted. Cronbach＇s alpha was used to measure content reliability and evaluate the internal consistence of RAS. The structural reliability was investigated by exploratory factor analysis method. The results showed that the content validity index was 0.92, and Cronbach＇s alpha of content reliability was 0.71. Structural validity, detected by Bartlett sphericity test, was 135.3 for 707 samples with the difference being statistically significant（P〈0.01）. KMO value was 0.729. The accumulative variance contribution ratio of common factor was 64.63%. The exploratory factor analysis showed the factor load of every clause was larger than 0.596. It was concluded that RAS of pressure sore for 3S surgery has better validity and reliability, and it could be used for evaluating and screening the high risk patients with pressure sores during surgery in order to efficiently reduce the occurrence of pressure sore during surgery. RAS of pressure sore for 3S surgery is worth to be popularized.展开更多
Prediction and control of the permanent settlement of a track caused by traffic loading from trains is crucial to high-speed railway design and maintenance. In this study, a unified prediction model of accumulative de...Prediction and control of the permanent settlement of a track caused by traffic loading from trains is crucial to high-speed railway design and maintenance. In this study, a unified prediction model of accumulative deformation of geomaterials used in railway construction subjected to cyclic loadings is introduced and calibrated using physical model testing. Based on this versatile model, a calculation approach to determine the track structure settlement under repeated loadings caused by the movement of the wheel axle of the train is proposed. Regression analysis on the physical model testing is adopted to determine the parameters involved in the computational approach. Comparison of model test data and computed results shows that the parameters obtained from the back-analysis are consistent throughout the various testing conditions, and the proposed calculation approach is capable of satisfactorily predicting the accumulative settlement of the railway roadbed and subgrade soil for various axle loads and loading cycles. A case study of a high-speed railway is performed to demonstrate the feasibility of the proposed approach in realistic engineering applications. The computation results from the settlement development of a roadbed and subgrade soil are presented and discussed.展开更多
Ultrafine-grain and high-strength Mg-SLi-1Al sheets were prepared by accumulative roll bonding （ARB） process. Evolution of microstructure and mechanical properties of ARB-processed Mg-5Li-1Al sheets was investigated...Ultrafine-grain and high-strength Mg-SLi-1Al sheets were prepared by accumulative roll bonding （ARB） process. Evolution of microstructure and mechanical properties of ARB-processed Mg-5Li-1Al sheets was investigated. Results show that, during ARB process, the evolution of deformation mechanism oft Mg-5Li-1Al alloy is as follows： twinning deformation, shear deformation, forming macro shear zone, and finally dynamic recrystallization （DRX）. The grain refining mechanism changes from twin DRX to rotation DRX. With the increase in ARB cycles, strength of the Mg-5Li-1Al sheets is enhanced, whilst elongation varies slightly. With the increase in rolling cycles, anisotropy of mechanical properties decreases. It is conclusive that strain hardening and grain refinement dominate the strengthening mechanism of Mg-5Li-1Al alloy.展开更多
The stable carbon isotope values of coalbed methane range widely, and also are gener- ally lighter than that of gases in normal coal-formed gas fields with similar coal rank. There exists strong carbon isotope fractio...The stable carbon isotope values of coalbed methane range widely, and also are gener- ally lighter than that of gases in normal coal-formed gas fields with similar coal rank. There exists strong carbon isotope fractionation in coalbed methane and it makes the carbon isotope value lighter. The correlation between the carbon isotope value and Ro in coalbed methane is less obvious. The coaly source rock maturity cannot be judged by coalbed methane carbon isotope value. The carbon isotopes of coalbed methane become lighter in much different degree due to the hydrodynamics. The stronger the hydrodynamics is, the lighter the CBM carbon isotopic value becomes. Many previous investigations indicated that the desorption-diffusion effects make the carbon isotope value of coalbed methane lighter. However, the explanation has encountered many problems. The authors of this arti- cle suggest that the flowing groundwater dissolution to free methane in coal seams and the free methane exchange with absorbed one is the carbon isotope fractionation mechanism in coalbed methane. The flowing groundwater in coal can easily take more 13CH4 away from free gas and com- paratively leave more 12CH4. This will make 12CH4 density in free gas comparatively higher than that in absorbed gas. The remaining 12CH4 in free gas then exchanges with the adsorbed methane in coal matrix. Some absorbed 13CH4 can be replaced and become free gas. Some free 12CH4 can be ab- sorbed again into coal matrix and become absorbed gas. Part of the newly replaced 13CH4 in free gas will also be taken away by water, leaving preferentially more 12CH4. The remaining 12CH4 in free gas will exchange again with adsorbed methane in the coal matrix. These processes occur all the time. Through accumulative effect, the 12CH4 will be greatly concentrated in coal. Thus, the stable carbon isotope of coalbed methane becomes dramatically lighter. Through simulation experiment on wa- ter-dissolved methane, it had been proved that the flowing water could fractionate the carbon isotop展开更多
Cu/Al multilayers were produced by high-temperature accumulative roll bonding(ARB)methods up to three passes.To achieve a high bonding strength,prior to ARB processing,the Cu and Al sheets were heated to 350,400,450 a...Cu/Al multilayers were produced by high-temperature accumulative roll bonding(ARB)methods up to three passes.To achieve a high bonding strength,prior to ARB processing,the Cu and Al sheets were heated to 350,400,450 and 500 ℃,respectively.The mechanical properties were evaluated by tensile tests.The microstructure was examined by optical microscopy and scanning electron microscopy equipped with energy dispersive spectrometry.The ultimate tensile stress,the grain size and the thickness of diffusion layer of lamellar composites increase with rolling temperature.When the rolling temperature is 400 ℃,the laminates show the highest ductility,but the yield stress is the lowest.As the rolling temperature further increases,both the yield stress and the ultimate tensile stress increase and the ductility decreases slightly.The mechanical properties of lamellar composites processed by low and high temperature ARB are determined by grain size and the thickness of diffusion layer,respectively.展开更多
Rock burst is a severe disaster in mining and underground engineering,and it is important to predict the rock burst risk for minimizing the loss during the constructing process.The rock burst proneness was connected w...Rock burst is a severe disaster in mining and underground engineering,and it is important to predict the rock burst risk for minimizing the loss during the constructing process.The rock burst proneness was connected with the acoustic emission(AE) parameter in this work,which contributes to predicting the rock burst risk using AE technique.Primarily,a rock burst proneness index is proposed,and it just depends on the heterogeneous degree of rock material.Then,the quantificational formula between the value of rock burst proneness index and the accumulative AE counts in rock sample under uniaxial compression with axial strain increases is developed.Finally,three kinds of rock samples,i.e.,granite,limestone and sandstone are tested about variation of the accumulative AE counts under uniaxial compression,and the test data are fitted well with the theoretic formula.展开更多
Ultrafine-grained aluminum processed by a new severe plastic deformation technique, accumulative extrusion bonding (AEB), was investigated. Microstructural characterization indicated good interfacial bonding and an av...Ultrafine-grained aluminum processed by a new severe plastic deformation technique, accumulative extrusion bonding (AEB), was investigated. Microstructural characterization indicated good interfacial bonding and an average grain size of ~440 nm was obtained after six passes. Tensile testing revealed that the strength reached the maximum value of 195 MPa and the total elongation exceeded 16% after five passes. The hardness was also significantly improved and almost reached saturation after the first pass. SEM fractography of AEB-processed specimens after tensile test showed that failure mode was shear ductile fracture with elongated shallow dimples. Comparison with conventional accumulative roll bonding indicates that this new AEB technique is more effective in refining grain and improving mechanical properties of the specimens.展开更多
Over-use of N fertilizer in crop production has resulted in a series of environmental problems in the North China Plain(NCP).Thus,improvement of nitrogen use efficiency(NUE)in summer maize has become an effective stra...Over-use of N fertilizer in crop production has resulted in a series of environmental problems in the North China Plain(NCP).Thus,improvement of nitrogen use efficiency(NUE)in summer maize has become an effective strategy for promoting sustainable agriculture in this region.Using twenty maize cultivars,plant dry matter production,N absorption and accumulation,yield formation,and NUE in summer maize were investigated under three N levels in two growing seasons.Based on their yield and yield components,these maize cultivars were categorized into four groups including efficient-efficient(EE)cultivars,high-nitrogen efficient(HNE)cultivars,low-nitrogen efficient(LNE)cultivars and nonefficient-nonefficient(NN)cultivars.In both two seasons,the EE cultivars improved grain yield together with increased plant biomass,and enhanced accumulative amounts as well as higher average grain yields than the other cultivar groups under deficient-N conditions.Significant correlations were observed between yield and kernel numbers(KN),dry matter(DM)amount and N accumulation at both post-silking and maturity stages.DM and N accumulation at late growth stage(i.e.,from silking to maturity)contributed largely to the enhanced yield capacity and improved NUE under N-deficient conditions.Compared with the NN cultivars,the EE cultivars also showed increased N assimilation amount(NAA)and N remobilization content(NRC),and elevated N remobilization efficiency(NRE),NUE and nitrogen partial factor productivity(PFPN).Our investigation has revealed N-associated physiological processes and may provide guidance for cultivation and breeding of high yield and NUE summer maize under limited N conditions in the NCP.展开更多
In the present study, an Al/Cu/Mg multi-layered composite was produced by accumulative roll bonding(ARB) through seven passes, and its microstructure and mechanical properties were evaluated. The microstructure invest...In the present study, an Al/Cu/Mg multi-layered composite was produced by accumulative roll bonding(ARB) through seven passes, and its microstructure and mechanical properties were evaluated. The microstructure investigations show that plastic instability occurred in both the copper and magnesium reinforcements in the primary sandwich. In addition, a composite with a perfectly uniform distribution of copper and magnesium reinforcing layers was produced during the last pass. By increasing the number of ARB cycles, the microhardness of the layers including aluminum, copper, and magnesium was significantly increased. The ultimate tensile strength of the sandwich was enhanced continually and reached a maximum value of 355.5 MPa. This strength value was about 3.2, 2, and 2.1 times higher than the initial strength values for the aluminum, copper, and magnesium sheets, respectively. Investigation of tensile fracture surfaces during the ARB process indicated that the fracture mechanism changed to shear ductile at the seventh pass.展开更多
The matrix accumulative roll bonding technology （MARB） can improve the matrix performance of metal composite and strengthen the bonding quality of the interface./n this research, for the fwst time, the technology of...The matrix accumulative roll bonding technology （MARB） can improve the matrix performance of metal composite and strengthen the bonding quality of the interface./n this research, for the fwst time, the technology of MARB was proposed. A sound Cu/AI bonding composite was obtained using the MARB process and the bonding characteristic of the interface was studied using scanning electricity microscope （SEM） and energy-dispersive spectroscopy （EDS）. The result indicated that accumulation cycles and diffusion annealing temperature were the most important factors for fabricating a Cu/AI composite material. The substrate aluminum was strengthened by MARB, and a high quality Cu/AI composite with sound interface was obtained as well.展开更多
In order to understand the occurrence and the developmental regularity of seabuckthorn carpenterworm (Holcocerus hippophaecolus) and predict its population density, the developmental threshold temperature (C) and effe...In order to understand the occurrence and the developmental regularity of seabuckthorn carpenterworm (Holcocerus hippophaecolus) and predict its population density, the developmental threshold temperature (C) and effective accumulative tem- perature (K) of the carpenterworm pupae and eggs were analyzed under the conditions of constant and variable temperatures. The results show that the values of C and K of the carpenterworm pupae are (12.1 ± 0.2) °C and (295.2 ± 4.1) day-degrees at constant temperatures, and (15.5 ± 0.4) °C and (202.4 ± 13.1) day-degrees at variable temperatures. However, the values of C and K of the eggs at variable temperatures are (16.7 ± 0.8) °C and (101.5 ± 12.6) day-degrees. The differences of developmental threshold and effective accumulative temperature under the conditions of constant and variable temperatures of the carpenterworm pupae accord with the developmental regularity of most insects in nature. By comparing five different constant temperatures, the conclusion is that the optimum developmental temperature of the pupae is 21 °C when both the pupation of the mature larvae and the eclosion of the pupae are very accordant. Moreover, the percentage of eclosion is over 90%. The average developmental durations of the carpenter- worm pupae and eggs are 31 and 16 d at variable temperatures.展开更多
High electromagnetic shielding performance was achieved in the Mg-9Li-3Al-1Zn alloy processed by accumulative roll bonding(ARB).The microstructure,electromagnetic interference shielding effectiveness(SE) in the freque...High electromagnetic shielding performance was achieved in the Mg-9Li-3Al-1Zn alloy processed by accumulative roll bonding(ARB).The microstructure,electromagnetic interference shielding effectiveness(SE) in the frequency of 30-1500 MHz and mechanical properties of the alloy were investigated.A model based on the shielding of the electromagnetic plane wave was used to theoretically discuss the EMI shielding mechanisms of ARB-processed alloy.Results indicate that the SE of the material increases gradually with the increase in the ARB pass.The enhanced SE can be attributed to the obvious microstructure orientation caused by ARB,and the alternative arrangement of alpha(Mg) phase and beta(Li)phase.In addition,with the increase in ARB pass,the number of interfaces between layers increases and the grain orientation of each layer tends to alignment along c-axis,which is beneficial to the reflection loss and multiple reflection loss of the incident electromagnetic wave.展开更多
Ti/Cu multilayered composites were fabricated via accumulative roll bonding(ARB). During codeformation of the constituent metals, the hard Ti layers necked preferentially and then fragmented with the development of sh...Ti/Cu multilayered composites were fabricated via accumulative roll bonding(ARB). During codeformation of the constituent metals, the hard Ti layers necked preferentially and then fragmented with the development of shear bands. Transmission electron microscopy showed that with increasing ARB cycles, grains in Ti were significantly refined even though dynamic recrystallization has occurred. For Cu the significant grain refinement was only found within the shear banded region when the composite was processed after five ARB cycles. Due to the diffusion of Cu atoms into Ti at the heterophase interfaces, amorphization with a width less than 10 nm was identified even in the composite processed by one cycle. At higher ARB cycles, the width of amorphous region increased and intermetallic compounds CuTi appeared from the region. The lattice defects introduced at the heterophase interfaces under roll bonding was responsible for the formation of the nano-scaled compounds. X-ray diffraction showed that an abnormal {1120} fiber texture was developed in Ti layers, while significant brass-type textures were developed in Cu layers. Some orientations along the {1120} fiber favored the prismatic < a> slip for Ti.Tensile tests revealed the elevated strength without a substantial sacrifice of ductility in the composites during ARB. The unique mechanical properties were attributed to the significantly refined grains in individual metals, the good bonding between the constituent metals, as well as the development of an abnormal {1120} fiber texture in Ti layers.展开更多
In this study, a multilayer Al/Ni/Cu composite reinforced with Si C particles was produced using an accumulative roll bonding(ARB) process with different cycles. The microstructure and mechanical properties of this co...In this study, a multilayer Al/Ni/Cu composite reinforced with Si C particles was produced using an accumulative roll bonding(ARB) process with different cycles. The microstructure and mechanical properties of this composite were investigated using optical and scanning microscopy and hardness and tensile testing. The results show that by increasing the applied strain, the Al/Ni/Cu multilayer composite converted from layer features to near a particle-strengthening characteristic. After the fifth ARB cycle, a composite with a uniform distribution of reinforcements(Cu, Ni, and SiC) was fabricated. The tensile strength of the composite increased from the initial sandwich structure to the first ARB cycle and then decreased from the first to the third ARB cycle. Upon reaching five ARB cycles, the tensile strength of the composite increased again. The variation in the elongation of the composite exhibited a tendency similar to that of its tensile strength. It is observed that with increasing strain, the microhardness values of the Al, Cu, and Ni layers increased, and that the dominant fracture mechanisms of Al and Cu were dimple formation and ductile fracture. In contrast, brittle fracture in specific plains was the main characteristic of Ni fractures.展开更多
Ultrafine-grained(UFG)AA1060 sheets were fabricated via five-cycle accumulative roll bonding(ARB)and subsequent three-pass cold rolling(298 K),or cryorolling(83 K and 173 K).Microstructures of the aluminum samples wer...Ultrafine-grained(UFG)AA1060 sheets were fabricated via five-cycle accumulative roll bonding(ARB)and subsequent three-pass cold rolling(298 K),or cryorolling(83 K and 173 K).Microstructures of the aluminum samples were examined via transmission electron microscopy,and their mechanical properties were measured via tensile and microhardness testing.Results indicate that ultrafine grains in ARB-processed sheets were further refined by subsequent rolling,and the grain size became finer with reducing rolling temperature.The mean grain size of 666 nm in the sheets subjected to ARB was refined to 346 or 266 nm,respectively,via subsequent cold rolling or cryorolling(83 K).Subsequent cryorolling resulted in ultrafine-grained sheets of higher strength and ductility than those of the sheets subjected to cold rolling.展开更多
Copper sheet with grain size of 30-60μm was processed by plastic deformation of asymmetrical accumulative rolling-bonding(AARB)with the strain of 3.2.The effects of annealing temperature and time on microstructural e...Copper sheet with grain size of 30-60μm was processed by plastic deformation of asymmetrical accumulative rolling-bonding(AARB)with the strain of 3.2.The effects of annealing temperature and time on microstructural evolution were studied by means of electron backscattered diffraction(EBSD).EBSD grain mapping,recrystallization pole figure and grain boundary misorientation angle distribution graph were constructed,and the characteristics were assessed by microstructure,grain size,grain boundary misorientation and texture.The results show that ultra fine grains(UFG)are obtained after annealing at 250℃ for 30?40 min.When the annealing is controlled at 250℃for 40 min,the recrystallization is finished,a large number of small grains appear and most grain boundaries consist of low-angle boundaries.The character of texture is rolling texture after the recrystallization treatment,but the strength of the texture is faint.While second recrystallization happens,{110}<1ī2>+{112}<11ī> texture component disappears and turns into{122}<212>cube twin texture component.展开更多
基金The Key Project for Knowledge Innovation Program of CAS,No.KZCX2-YW-501The Western Talent Project of CAS in2005The National S&T Pillar Program,No.007BAC03A11-05
文摘Anthropogenic greenhouse gases （GHG） emission and related global warming issues have been the focus of international communities for some time. The international communities have reached a consensus to reduce anthropogenic GHG emissions and restrain global warming. The quantitative assessment of anthropogenic GHG emissions is the scientific basis to find out the status of global GHG emission, identify the commitments of each country, and arrange the international efforts of GHG emission reduction. Currently the main assessment indicators for GHG emission include national indicator, per capita indicator, per GDP indicator, and international trade indicator etc. The introduction to the above indi- cators is put forward and their merits and demerits are analyzed. Based on the GHG emission data from the World Resource Institute （WRI）, the US Energy Information Administration （EIA）, and the Carbon Dioxide Information Analysis Center （CDIAC）, the results of each indictor are calculated for the world, for the eight G8 industrialized countries （USA, UK, Canada, Japan, Germany, France, Italy and Russia）, and the five major developing countries including China, Brazil, India, South Africa and Mexico. The paper points out that all these indicators have some limitations. The Indicator of Industrialized Accumulative Emission per Capita （IAEC） is put forward as the equitable indicator to evaluate the industrialized historical accumulative emission per capita of every country. IAEC indicator can reflect the economic achievement of GHG emission enjoyed by the current generations in every country and their commitments. The analysis of IAEC indicates that the historical accumulative emission per capita in indus- trialized countries such as UK and USA were typically higher than those of the world average and the developing countries. Emission indicator per capita per GDP, consumptive emission indicator and survival emission indicator are also put forward and discussed in the paper.
基金supported by the National Natural Science Foundation of China (Grant No. 50890173)
文摘Al/Mg alloy multilayered composites were produced successfully at the lower temperature（280 C） by accumulative roll bonding（ARB） processing technique.The microstructures of Al and Mg alloy layers were characterized by scanning electron microscopy and transmission electron microscopy.Vickers hardness and three-point bending tests were conducted to investigate mechanical properties of the composites.It is found that Vickers hardness,bending strength and stiffness modulus of the Al/Mg alloy multilayered composite increase with increasing the ARB pass.Delamination and crack propagation along the interface are the two main failure modes of the multilayered composite subjected to bending load.Strengthening and fracture mechanisms of the composite are analyzed.
文摘The reliability and validity of risk assessment scale（RAS） of pressure sore during 3S surgery were investigated. RAS of pressure sore was designed independently during 3S surgery. Five operating room nursing experts were selected to consult and detect face validity. Convenient and purposive sampling of 707 samples was conducted. Cronbach＇s alpha was used to measure content reliability and evaluate the internal consistence of RAS. The structural reliability was investigated by exploratory factor analysis method. The results showed that the content validity index was 0.92, and Cronbach＇s alpha of content reliability was 0.71. Structural validity, detected by Bartlett sphericity test, was 135.3 for 707 samples with the difference being statistically significant（P〈0.01）. KMO value was 0.729. The accumulative variance contribution ratio of common factor was 64.63%. The exploratory factor analysis showed the factor load of every clause was larger than 0.596. It was concluded that RAS of pressure sore for 3S surgery has better validity and reliability, and it could be used for evaluating and screening the high risk patients with pressure sores during surgery in order to efficiently reduce the occurrence of pressure sore during surgery. RAS of pressure sore for 3S surgery is worth to be popularized.
基金National Natural Science Foundation of China Under Grant No.50538010,10702063Technology Promotion Project of China Ministry of Railway Under Grant No.2008G005-D
文摘Prediction and control of the permanent settlement of a track caused by traffic loading from trains is crucial to high-speed railway design and maintenance. In this study, a unified prediction model of accumulative deformation of geomaterials used in railway construction subjected to cyclic loadings is introduced and calibrated using physical model testing. Based on this versatile model, a calculation approach to determine the track structure settlement under repeated loadings caused by the movement of the wheel axle of the train is proposed. Regression analysis on the physical model testing is adopted to determine the parameters involved in the computational approach. Comparison of model test data and computed results shows that the parameters obtained from the back-analysis are consistent throughout the various testing conditions, and the proposed calculation approach is capable of satisfactorily predicting the accumulative settlement of the railway roadbed and subgrade soil for various axle loads and loading cycles. A case study of a high-speed railway is performed to demonstrate the feasibility of the proposed approach in realistic engineering applications. The computation results from the settlement development of a roadbed and subgrade soil are presented and discussed.
基金supported by the National Natural Science Foundation of China (51671063)Research Fund for the Doctoral Program of Higher Education (20132304110006)+1 种基金the Fundamental Research Funds for the Central Universities (HEUCF20161016)Harbin City Application Technology Research and Development Project (2015AE4AE005, 2015RQXXJ001, 2016AB2AG013)
文摘Ultrafine-grain and high-strength Mg-SLi-1Al sheets were prepared by accumulative roll bonding （ARB） process. Evolution of microstructure and mechanical properties of ARB-processed Mg-5Li-1Al sheets was investigated. Results show that, during ARB process, the evolution of deformation mechanism oft Mg-5Li-1Al alloy is as follows： twinning deformation, shear deformation, forming macro shear zone, and finally dynamic recrystallization （DRX）. The grain refining mechanism changes from twin DRX to rotation DRX. With the increase in ARB cycles, strength of the Mg-5Li-1Al sheets is enhanced, whilst elongation varies slightly. With the increase in rolling cycles, anisotropy of mechanical properties decreases. It is conclusive that strain hardening and grain refinement dominate the strengthening mechanism of Mg-5Li-1Al alloy.
文摘The stable carbon isotope values of coalbed methane range widely, and also are gener- ally lighter than that of gases in normal coal-formed gas fields with similar coal rank. There exists strong carbon isotope fractionation in coalbed methane and it makes the carbon isotope value lighter. The correlation between the carbon isotope value and Ro in coalbed methane is less obvious. The coaly source rock maturity cannot be judged by coalbed methane carbon isotope value. The carbon isotopes of coalbed methane become lighter in much different degree due to the hydrodynamics. The stronger the hydrodynamics is, the lighter the CBM carbon isotopic value becomes. Many previous investigations indicated that the desorption-diffusion effects make the carbon isotope value of coalbed methane lighter. However, the explanation has encountered many problems. The authors of this arti- cle suggest that the flowing groundwater dissolution to free methane in coal seams and the free methane exchange with absorbed one is the carbon isotope fractionation mechanism in coalbed methane. The flowing groundwater in coal can easily take more 13CH4 away from free gas and com- paratively leave more 12CH4. This will make 12CH4 density in free gas comparatively higher than that in absorbed gas. The remaining 12CH4 in free gas then exchanges with the adsorbed methane in coal matrix. Some absorbed 13CH4 can be replaced and become free gas. Some free 12CH4 can be ab- sorbed again into coal matrix and become absorbed gas. Part of the newly replaced 13CH4 in free gas will also be taken away by water, leaving preferentially more 12CH4. The remaining 12CH4 in free gas will exchange again with adsorbed methane in the coal matrix. These processes occur all the time. Through accumulative effect, the 12CH4 will be greatly concentrated in coal. Thus, the stable carbon isotope of coalbed methane becomes dramatically lighter. Through simulation experiment on wa- ter-dissolved methane, it had been proved that the flowing water could fractionate the carbon isotop
基金Project(51674303) supported by the National Natural Science Foundation of ChinaProject supported by National Youth Thousand Plan of China+2 种基金Project(2018RS3015) supported by Huxiang High-Level Talent Gathering Program of Hunan Province,ChinaProject(2019CX006) supported by Innovation Driven Program of Central South University,ChinaProject supported by the Research Fund of the Key Laboratory of High Performance Complex Manufacturing at Central South University,China
文摘Cu/Al multilayers were produced by high-temperature accumulative roll bonding(ARB)methods up to three passes.To achieve a high bonding strength,prior to ARB processing,the Cu and Al sheets were heated to 350,400,450 and 500 ℃,respectively.The mechanical properties were evaluated by tensile tests.The microstructure was examined by optical microscopy and scanning electron microscopy equipped with energy dispersive spectrometry.The ultimate tensile stress,the grain size and the thickness of diffusion layer of lamellar composites increase with rolling temperature.When the rolling temperature is 400 ℃,the laminates show the highest ductility,but the yield stress is the lowest.As the rolling temperature further increases,both the yield stress and the ultimate tensile stress increase and the ductility decreases slightly.The mechanical properties of lamellar composites processed by low and high temperature ARB are determined by grain size and the thickness of diffusion layer,respectively.
基金Project(2010CB226804)supported by the National Basic Research Program(973 Program)of ChinaProject(11202108)supported by the National Natural Science Foundation of ChinaProject(BK20130189)supported by the Natural Science Foundation of Jiangsu Province,China
文摘Rock burst is a severe disaster in mining and underground engineering,and it is important to predict the rock burst risk for minimizing the loss during the constructing process.The rock burst proneness was connected with the acoustic emission(AE) parameter in this work,which contributes to predicting the rock burst risk using AE technique.Primarily,a rock burst proneness index is proposed,and it just depends on the heterogeneous degree of rock material.Then,the quantificational formula between the value of rock burst proneness index and the accumulative AE counts in rock sample under uniaxial compression with axial strain increases is developed.Finally,three kinds of rock samples,i.e.,granite,limestone and sandstone are tested about variation of the accumulative AE counts under uniaxial compression,and the test data are fitted well with the theoretic formula.
基金Project(2016YFB0301104) supported by the National Key Research and Development Program of ChinaProjects(51671041,51531002) supported by the National Natural Science Foundation of ChinaProject(cstc2017jcyjBX0040) supported by the Natural Science Foundation of Chongqing City,China
文摘Ultrafine-grained aluminum processed by a new severe plastic deformation technique, accumulative extrusion bonding (AEB), was investigated. Microstructural characterization indicated good interfacial bonding and an average grain size of ~440 nm was obtained after six passes. Tensile testing revealed that the strength reached the maximum value of 195 MPa and the total elongation exceeded 16% after five passes. The hardness was also significantly improved and almost reached saturation after the first pass. SEM fractography of AEB-processed specimens after tensile test showed that failure mode was shear ductile fracture with elongated shallow dimples. Comparison with conventional accumulative roll bonding indicates that this new AEB technique is more effective in refining grain and improving mechanical properties of the specimens.
基金supported by the National Key Research and Development Program of China (2018YFD0300503)
文摘Over-use of N fertilizer in crop production has resulted in a series of environmental problems in the North China Plain(NCP).Thus,improvement of nitrogen use efficiency(NUE)in summer maize has become an effective strategy for promoting sustainable agriculture in this region.Using twenty maize cultivars,plant dry matter production,N absorption and accumulation,yield formation,and NUE in summer maize were investigated under three N levels in two growing seasons.Based on their yield and yield components,these maize cultivars were categorized into four groups including efficient-efficient(EE)cultivars,high-nitrogen efficient(HNE)cultivars,low-nitrogen efficient(LNE)cultivars and nonefficient-nonefficient(NN)cultivars.In both two seasons,the EE cultivars improved grain yield together with increased plant biomass,and enhanced accumulative amounts as well as higher average grain yields than the other cultivar groups under deficient-N conditions.Significant correlations were observed between yield and kernel numbers(KN),dry matter(DM)amount and N accumulation at both post-silking and maturity stages.DM and N accumulation at late growth stage(i.e.,from silking to maturity)contributed largely to the enhanced yield capacity and improved NUE under N-deficient conditions.Compared with the NN cultivars,the EE cultivars also showed increased N assimilation amount(NAA)and N remobilization content(NRC),and elevated N remobilization efficiency(NRE),NUE and nitrogen partial factor productivity(PFPN).Our investigation has revealed N-associated physiological processes and may provide guidance for cultivation and breeding of high yield and NUE summer maize under limited N conditions in the NCP.
文摘In the present study, an Al/Cu/Mg multi-layered composite was produced by accumulative roll bonding(ARB) through seven passes, and its microstructure and mechanical properties were evaluated. The microstructure investigations show that plastic instability occurred in both the copper and magnesium reinforcements in the primary sandwich. In addition, a composite with a perfectly uniform distribution of copper and magnesium reinforcing layers was produced during the last pass. By increasing the number of ARB cycles, the microhardness of the layers including aluminum, copper, and magnesium was significantly increased. The ultimate tensile strength of the sandwich was enhanced continually and reached a maximum value of 355.5 MPa. This strength value was about 3.2, 2, and 2.1 times higher than the initial strength values for the aluminum, copper, and magnesium sheets, respectively. Investigation of tensile fracture surfaces during the ARB process indicated that the fracture mechanism changed to shear ductile at the seventh pass.
基金the National Natural Science Foundation of China (No. 50375019).
文摘The matrix accumulative roll bonding technology （MARB） can improve the matrix performance of metal composite and strengthen the bonding quality of the interface./n this research, for the fwst time, the technology of MARB was proposed. A sound Cu/AI bonding composite was obtained using the MARB process and the bonding characteristic of the interface was studied using scanning electricity microscope （SEM） and energy-dispersive spectroscopy （EDS）. The result indicated that accumulation cycles and diffusion annealing temperature were the most important factors for fabricating a Cu/AI composite material. The substrate aluminum was strengthened by MARB, and a high quality Cu/AI composite with sound interface was obtained as well.
文摘In order to understand the occurrence and the developmental regularity of seabuckthorn carpenterworm (Holcocerus hippophaecolus) and predict its population density, the developmental threshold temperature (C) and effective accumulative tem- perature (K) of the carpenterworm pupae and eggs were analyzed under the conditions of constant and variable temperatures. The results show that the values of C and K of the carpenterworm pupae are (12.1 ± 0.2) °C and (295.2 ± 4.1) day-degrees at constant temperatures, and (15.5 ± 0.4) °C and (202.4 ± 13.1) day-degrees at variable temperatures. However, the values of C and K of the eggs at variable temperatures are (16.7 ± 0.8) °C and (101.5 ± 12.6) day-degrees. The differences of developmental threshold and effective accumulative temperature under the conditions of constant and variable temperatures of the carpenterworm pupae accord with the developmental regularity of most insects in nature. By comparing five different constant temperatures, the conclusion is that the optimum developmental temperature of the pupae is 21 °C when both the pupation of the mature larvae and the eclosion of the pupae are very accordant. Moreover, the percentage of eclosion is over 90%. The average developmental durations of the carpenter- worm pupae and eggs are 31 and 16 d at variable temperatures.
基金This work was financially supported by the National Natural Science Foundation of China(Nos.51671063,51771060,51871068,51971071)the Domain Foundation of Equipment Advance Research of 13th Five-year Plan(No.61409220118)+1 种基金the Fundamental Research Funds for the Central Universities(No.HEUCFG201834)the Harbin City Application Technology Research and Development Project(No.2017RAQXJ032).
文摘High electromagnetic shielding performance was achieved in the Mg-9Li-3Al-1Zn alloy processed by accumulative roll bonding(ARB).The microstructure,electromagnetic interference shielding effectiveness(SE) in the frequency of 30-1500 MHz and mechanical properties of the alloy were investigated.A model based on the shielding of the electromagnetic plane wave was used to theoretically discuss the EMI shielding mechanisms of ARB-processed alloy.Results indicate that the SE of the material increases gradually with the increase in the ARB pass.The enhanced SE can be attributed to the obvious microstructure orientation caused by ARB,and the alternative arrangement of alpha(Mg) phase and beta(Li)phase.In addition,with the increase in ARB pass,the number of interfaces between layers increases and the grain orientation of each layer tends to alignment along c-axis,which is beneficial to the reflection loss and multiple reflection loss of the incident electromagnetic wave.
基金financially supported by the National Natural Science Foundation of China(No.51571057)the Fundamental Research Funds for the Central Universities(No.N170204012)
文摘Ti/Cu multilayered composites were fabricated via accumulative roll bonding(ARB). During codeformation of the constituent metals, the hard Ti layers necked preferentially and then fragmented with the development of shear bands. Transmission electron microscopy showed that with increasing ARB cycles, grains in Ti were significantly refined even though dynamic recrystallization has occurred. For Cu the significant grain refinement was only found within the shear banded region when the composite was processed after five ARB cycles. Due to the diffusion of Cu atoms into Ti at the heterophase interfaces, amorphization with a width less than 10 nm was identified even in the composite processed by one cycle. At higher ARB cycles, the width of amorphous region increased and intermetallic compounds CuTi appeared from the region. The lattice defects introduced at the heterophase interfaces under roll bonding was responsible for the formation of the nano-scaled compounds. X-ray diffraction showed that an abnormal {1120} fiber texture was developed in Ti layers, while significant brass-type textures were developed in Cu layers. Some orientations along the {1120} fiber favored the prismatic < a> slip for Ti.Tensile tests revealed the elevated strength without a substantial sacrifice of ductility in the composites during ARB. The unique mechanical properties were attributed to the significantly refined grains in individual metals, the good bonding between the constituent metals, as well as the development of an abnormal {1120} fiber texture in Ti layers.
文摘In this study, a multilayer Al/Ni/Cu composite reinforced with Si C particles was produced using an accumulative roll bonding(ARB) process with different cycles. The microstructure and mechanical properties of this composite were investigated using optical and scanning microscopy and hardness and tensile testing. The results show that by increasing the applied strain, the Al/Ni/Cu multilayer composite converted from layer features to near a particle-strengthening characteristic. After the fifth ARB cycle, a composite with a uniform distribution of reinforcements(Cu, Ni, and SiC) was fabricated. The tensile strength of the composite increased from the initial sandwich structure to the first ARB cycle and then decreased from the first to the third ARB cycle. Upon reaching five ARB cycles, the tensile strength of the composite increased again. The variation in the elongation of the composite exhibited a tendency similar to that of its tensile strength. It is observed that with increasing strain, the microhardness values of the Al, Cu, and Ni layers increased, and that the dominant fracture mechanisms of Al and Cu were dimple formation and ductile fracture. In contrast, brittle fracture in specific plains was the main characteristic of Ni fractures.
基金financial supports from the National Key Research and Development Program of China (No. 2019YFB2006500)the National Natural Science Foundation of China (No. 51674303)+2 种基金the Huxiang High-level Talent Gathering Project of Hunan Province, China (No. 2018RS3015)the Innovation Driven Program of Central South University, China (No. 2019CX006)the Research Fund of the Key Laboratory of High Performance Complex Manufacturing at Central South University, China。
文摘Ultrafine-grained(UFG)AA1060 sheets were fabricated via five-cycle accumulative roll bonding(ARB)and subsequent three-pass cold rolling(298 K),or cryorolling(83 K and 173 K).Microstructures of the aluminum samples were examined via transmission electron microscopy,and their mechanical properties were measured via tensile and microhardness testing.Results indicate that ultrafine grains in ARB-processed sheets were further refined by subsequent rolling,and the grain size became finer with reducing rolling temperature.The mean grain size of 666 nm in the sheets subjected to ARB was refined to 346 or 266 nm,respectively,via subsequent cold rolling or cryorolling(83 K).Subsequent cryorolling resulted in ultrafine-grained sheets of higher strength and ductility than those of the sheets subjected to cold rolling.
基金Projects(50804018,50564005)supported by the National Natural Science Foundation of ChinaProject(2003E0003Z)supported by the Key Science Foundation of Yunnan Province,China+1 种基金Project(08Y0055)supported by Scientific Research Fund of Yunnan Provincial Education Department,ChinaProject(2008-055)supported by Talents Cultivation Foundation of Kunming University of Science and Technology,China
文摘Copper sheet with grain size of 30-60μm was processed by plastic deformation of asymmetrical accumulative rolling-bonding(AARB)with the strain of 3.2.The effects of annealing temperature and time on microstructural evolution were studied by means of electron backscattered diffraction(EBSD).EBSD grain mapping,recrystallization pole figure and grain boundary misorientation angle distribution graph were constructed,and the characteristics were assessed by microstructure,grain size,grain boundary misorientation and texture.The results show that ultra fine grains(UFG)are obtained after annealing at 250℃ for 30?40 min.When the annealing is controlled at 250℃for 40 min,the recrystallization is finished,a large number of small grains appear and most grain boundaries consist of low-angle boundaries.The character of texture is rolling texture after the recrystallization treatment,but the strength of the texture is faint.While second recrystallization happens,{110}<1ī2>+{112}<11ī> texture component disappears and turns into{122}<212>cube twin texture component.
