In order to realize the parametric design of the conjugate cam weft insertion mechanism,according to the necessary parameters of weft insertion process,ideal kinematic curves of the weft insertion mechanism were given...In order to realize the parametric design of the conjugate cam weft insertion mechanism,according to the necessary parameters of weft insertion process,ideal kinematic curves of the weft insertion mechanism were given,and the mathematical model of reverse solution for this mechanism was established.The parameters of this mechanism were obtained by reverse solution on the basis of the given ideal kinematic curves and kinematic requirements.The parametric design platform which was integrated with the functions of parametric reverse solution,motion simulation,three-dimensional modeling and virtual assembly was developed based on VB.NET and Unigraphics(UG) NX.After entering the technological parameters of weft insertion process and essential structural parameters by users,three-dimensional drawing of the main parts such as the conjugate cam and shaft,can be obtained by this platform,also the processing data of the cam can be calculated.This platform provides a rapid approach for parametric design of weft insertion mechanism.展开更多
Inspired by the idea that bionic non-smooth surfaces(BNSS)can reduce water flow resistance,the application of BNSS resistance reduction method in grooves surface of antiskid tire tread pattern has been investigated fo...Inspired by the idea that bionic non-smooth surfaces(BNSS)can reduce water flow resistance,the application of BNSS resistance reduction method in grooves surface of antiskid tire tread pattern has been investigated for increasing hydroplaning velocity of tire by using computational fluid dynamics(CFD)simulation.Three kinds of BNSS(riblet,convex dome,and dimple concave)are arranged in tire tread grooves to study the water flow resistance effects in grooves with non-smooth characteristics.A tire-water coupled model is established and CFD technique is applied to simulating hydroplaning.The simulation results show that BNSS grooves can reduce water flow resistance and increase mean flow rate by disturbing the eddy movement in boundary layers.The drag forces of riblet and dimple surface are lower and drainage capacity is higher than those of smooth surface under the same void space on tread pattern,but it is not in dome.BNSS is a good way to promote antiskid performance without increasing additional groove space;extra tire-road noise production is therefore avoided due to groove space enlargement.展开更多
In order to decrease the deformation and stress and increase the natural frequency of the fixed table,a method of optimization driven by the sensitivity and topology analyses is proposed.The finite element model of th...In order to decrease the deformation and stress and increase the natural frequency of the fixed table,a method of optimization driven by the sensitivity and topology analyses is proposed.The finite element model of the fixed table is constructed and analyzed by using ANSYS software.Based on the results of static analysis and modal analysis,the maximum deformation,the maximum stress,and natural frequencies are obtained.Then,the sensitivity analysis and topology optimization are carried out to find out the parameters to be optimized.The fixed table is reconstructed according to optimal design scheme.In the comparison of the results between original model and the optimized one,the maximum deformation and stress are decreased by 71.73%and 60.27%respectively.At the same time,the natural frequencies from the first mode to the sixth mode are increased by 30.28%,29.57%,29.51%,31.52%,22.19%,and 21.80%,respectively.The method can provide technology guide for the design and optimization of machining structure.展开更多
Jet pipe electro-hydraulic servo valve is the heart of feedback control systems,and it is one of the mechatronic components used for precision flow control application.It consists of several precision and ddicate comp...Jet pipe electro-hydraulic servo valve is the heart of feedback control systems,and it is one of the mechatronic components used for precision flow control application.It consists of several precision and ddicate components.The performance of the jet pipe servo valve depends on many parameters.During the developmental stage,it is very difficult to ascertain the function parameters.The steady-state analysis of jet pipe electro-hydraulic servo valve has been made to simulate its fluid characteristics （flowin,flow-out,leakage flow,recovery or load pressure,etc.） by mathematical modeling.Theoretical model was conducted on various affecting parameters on the pressure,the main flow rate of fluid,or leakage flow through the receiver holes.The major parameters studied are jet pipe nozzle diameters,receiver hole diameters,angle between the two centre-lines of receiver hole,nozzle offset,and nozzle stand-of distance.In this paper the research is important to determine and optimize the structural parameters of jet pipe servo valve.Thus,equations of the pressure and flow characteristics are set up and the optimal structural parameters of jet pipe are established.展开更多
A self-tuning reaching law based sliding mode control(SMC)theory is proposed to stabilize the nonlinear continuous stirred tank reactor(CSTR).T-S fuzzy logic is used to build a global fuzzy state-space linear model.Co...A self-tuning reaching law based sliding mode control(SMC)theory is proposed to stabilize the nonlinear continuous stirred tank reactor(CSTR).T-S fuzzy logic is used to build a global fuzzy state-space linear model.Combing the traits of SMC and CSTR,three fuzzy rules can meet the requirements of controlled system.The self-tuning switch control law which can drive the state variables to the sliding surface as soon as possible is designed to ensure the robustness of uncertain fuzzy system.Lyapunov equation is applied to proving the stability of the sliding surface.The simulations show that the proposed approach can achieve desired performance with less chattering problem.展开更多
To extract features of fabric defects effectively and reduce dimension of feature space,a feature extraction method of fabric defects based on complex contourlet transform （CCT） and principal component analysis （PC...To extract features of fabric defects effectively and reduce dimension of feature space,a feature extraction method of fabric defects based on complex contourlet transform （CCT） and principal component analysis （PCA） is proposed.Firstly,training samples of fabric defect images are decomposed by CCT.Secondly,PCA is applied in the obtained low-frequency component and part of highfrequency components to get a lower dimensional feature space.Finally,components of testing samples obtained by CCT are projected onto the feature space where different types of fabric defects are distinguished by the minimum Euclidean distance method.A large number of experimental results show that,compared with PCA,the method combining wavdet low-frequency component with PCA （WLPCA）,the method combining contourlet transform with PCA （CPCA）,and the method combining wavelet low-frequency and highfrequency components with PCA （WPCA）,the proposed method can extract features of common fabric defect types effectively.The recognition rate is greatly improved while the dimension is reduced.展开更多
High enzymatic activity is required for laccase applications.Central composite design （CCD）-based response surface methodology （RSM） can effectively increase the enzymatic activity of Pleurotus ostreatus P40 in li...High enzymatic activity is required for laccase applications.Central composite design （CCD）-based response surface methodology （RSM） can effectively increase the enzymatic activity of Pleurotus ostreatus P40 in liquid substrate fermentation.Initial screening of the nutritional components was performed using a Plackett-Burman design.The variables,namely,bran,bagasse,Tween 80,and yeast extract,were found to have statistically significant effects on laccase activity.These variables were further optimized using CCD-based RSM.Optimal concentrations for the maximum laccase activity were 8.144 2 g/L bran,50 g/L bagasse,0.424 1 mL/L Tween 80,and 2.832 5 g/L yeast extract.Under optimized conditions,the maximum measured laccase activity reached 96 480 U/L,which was close to the predicted value （104 830 U/L） by RSM.Therefore,RSM can be used to optimize culture components for laccase activity from Pieurotus ostreatus P40.展开更多
This work investigates synchronization of two fractional unified hyperchaotic systems via impulsive control.The stable theory about impulsive fractional equation is studied based on the stable theory about fractional ...This work investigates synchronization of two fractional unified hyperchaotic systems via impulsive control.The stable theory about impulsive fractional equation is studied based on the stable theory about fractional linear system.Then according to the theorem proposed the sufficient condition on feedback strength and impulsive interval are established to guarantee the synchronization.Numerical simulations show the effectiveness of the theorem.展开更多
Increasing complexity of distributed hydrological model （DHM） has lowered the efficiency of convergence.In this study,global sensitivity analysis （SA） was introduced by combining multiobjective （MO） optimization...Increasing complexity of distributed hydrological model （DHM） has lowered the efficiency of convergence.In this study,global sensitivity analysis （SA） was introduced by combining multiobjective （MO） optimization for DHM calibration.Latin Hypercube-once at a time （LH-OAT） was adopted in global parameter SA to obtain relative sensitivity of model parameter,which can be categorized into different sensitivity levels.Two comparative study cases were conducted to present the efficiency and feasibility by combining SA with MO（SA-MO）.WetSpa model with non-dominated sorting genetic algorithm-Ⅱ （NSGA-Ⅱ） algorithm and EasyDHM model with multi-objective sequential complex evolutionary metropolis-uncertainty analysis （MOSCEM-UA）algorithm were adopted to demonstrate the general feasibility of combining SA in optimization.Results showed that the LH-OAT was globally effective in selecting high sensitivity parameters.It proves that using parameter from high sensitivity groups results in higher convergence efficiency.Study case Ⅰ showed a better Pareto front distribution and convergence compared with model calibration without SA.Study case Ⅱ indicated a more efficient convergence of parameters in sequential evolution of MOSCEM-UA under the same iteration.It indicates that SA-MO is feasible and efficient for high dimensional DHM calibration.展开更多
Sale-leaseback is paid special focus on for its great application in China in recent years.By giving a detailed analysis,an analysis of the features of sale-leaseback and a study of the risks of it are given in this p...Sale-leaseback is paid special focus on for its great application in China in recent years.By giving a detailed analysis,an analysis of the features of sale-leaseback and a study of the risks of it are given in this paper.Then a quantitative analysis of commercial real estate sale-leaseback is carried out.The scientific theoretical analysis is provided in this paper for risk assessment in commercial real estate sale-leaseback mode in China.An effective approach is put forward for sale-leaseback project evaluation and prevention of risk.A useful means is given to supervise commerciai real estate sale-leaseback mode for relevant departments and a certain contribution is made to a further sound development of commercial real estate sale-leaseback mode.展开更多
Quick detection of a small initial fault is important for an induction motor to prevent a consequent large fault.The mathematical model with basic motor equations among voltages,currents,and fluxes is analyzed and the...Quick detection of a small initial fault is important for an induction motor to prevent a consequent large fault.The mathematical model with basic motor equations among voltages,currents,and fluxes is analyzed and the motor model equations are described.The fault related features are extracted.An immune memory dynamic clonal strategy(IMDCS)system is applied to detecting the stator faults of induction motor.Four features are obtained from the induction motor,and then these features are given to the IMDCS system.After the motor condition has been learned by the IMDCS system,the memory set obtained in the training stage can be used to detect any fault.The proposed method is experimentally implemented on the induction motor,and the experimental results show the applicability and effectiveness of the proposed method to the diagnosis of stator winding turn faults in induction motors.展开更多
To relax convexity assumptions imposed on the functions in theorems on sufficient conditions and duality,new concepts of generalized dI-G-type Ⅰ invexity were introduced for nondifferentiable multiobjective programmi...To relax convexity assumptions imposed on the functions in theorems on sufficient conditions and duality,new concepts of generalized dI-G-type Ⅰ invexity were introduced for nondifferentiable multiobjective programming problems.Based upon these generalized invexity,G-Fritz-John （G-F-J） and G-Karnsh-Kuhn-Tucker （G-K-K-T） types sufficient optimality conditions were established for a feasible solution to be an efficient solution.Moreover,weak and strict duality results were derived for a G-Mond-Weir type dual under various types of generalized dI-G-type Ⅰ invexity assumptions.展开更多
This paper proposes a steady-state errors correction(SSEC)method for eliminating measurement errors.This method is based on the detections of error signal E(s)and output C(s)which generate an expected output R(s).In c...This paper proposes a steady-state errors correction(SSEC)method for eliminating measurement errors.This method is based on the detections of error signal E(s)and output C(s)which generate an expected output R(s).In comparison with the conventional solutions which are based on detecting the expected output R(s)and output C(s)to obtain error signal E(s),the measurement errors are eliminated even the error might be at a significant level.Moreover,it is possible that the individual debugging by regulating the coefficient K for every member of the multiple objectives achieves the optimization of the open loop gain.Therefore,this simple method can be applied to the weak coupling and multiple objectives system,which is usually controlled by complex controller.The principle of eliminating measurement errors is derived analytically,and the advantages comparing with the conventional solutions are depicted.Based on the SSEC method analysis,an application of this method for an active power filter(APF)is investigated and the effectiveness and viability of the scheme are demonstrated through the simulation and experimental verifications.展开更多
Uncertain local flexural stiffness is recognized as one of the main barriers against the application of existing damage detection and performance degradation alarming techniques to real-world beams.Therefore,damage lo...Uncertain local flexural stiffness is recognized as one of the main barriers against the application of existing damage detection and performance degradation alarming techniques to real-world beams.Therefore,damage localization of beams with original uncertainty has been investigated to ensure their safety.For the beam before serving,it should be simply supported and subject to static load.Based on the concept of suppositional partition,a new loading pattern and mid-span displacement data processing method has been proposed.Actual local flexural stiffness value of each partition can be obtained by solving a set of linear equations.The obtained stiffness data can be used to establish the finite element model of beams.Subsequently,dynamic excitation and mode identification should be carried out for the beam in service.Mode shape curvature index is employed to detect the position of damage.It was validated by example that actual damage and original uncertainty of local flexural stiffness can be differentiated by this new method effectively.The combination of static load and dynamic excitation can keep the serviceability of beam.展开更多
A low-complexity algorithm is proposed in this paper in order to optimize irregular low-density parity-check （LDPC） codes.The algorithm proposed can calculate the noise threshold by means of a one-dimensional densit...A low-complexity algorithm is proposed in this paper in order to optimize irregular low-density parity-check （LDPC） codes.The algorithm proposed can calculate the noise threshold by means of a one-dimensional density evolution and search the optimal degree profiles with fast-convergence differential evolution,so that it has a lower complexity and a faster convergence speed.Simulation resuits show that the irregular LDPC codes optimized by the presented algorithm can also perform better than Turbo codes at moderate block length even with less computation cost.展开更多
基金National Natural Science Foundation of China (No.50875243)Natural Science Foundation of Zhejiang Province,China (No.Y1110100)
文摘In order to realize the parametric design of the conjugate cam weft insertion mechanism,according to the necessary parameters of weft insertion process,ideal kinematic curves of the weft insertion mechanism were given,and the mathematical model of reverse solution for this mechanism was established.The parameters of this mechanism were obtained by reverse solution on the basis of the given ideal kinematic curves and kinematic requirements.The parametric design platform which was integrated with the functions of parametric reverse solution,motion simulation,three-dimensional modeling and virtual assembly was developed based on VB.NET and Unigraphics(UG) NX.After entering the technological parameters of weft insertion process and essential structural parameters by users,three-dimensional drawing of the main parts such as the conjugate cam and shaft,can be obtained by this platform,also the processing data of the cam can be calculated.This platform provides a rapid approach for parametric design of weft insertion mechanism.
基金Colleges and Universities in Jiangsu Province Pans to Graduate Research and Innovation,China(No.CXLX13_676)Jiangsu Province Six Talents Peak Project,China(No.2011A031)
文摘Inspired by the idea that bionic non-smooth surfaces(BNSS)can reduce water flow resistance,the application of BNSS resistance reduction method in grooves surface of antiskid tire tread pattern has been investigated for increasing hydroplaning velocity of tire by using computational fluid dynamics(CFD)simulation.Three kinds of BNSS(riblet,convex dome,and dimple concave)are arranged in tire tread grooves to study the water flow resistance effects in grooves with non-smooth characteristics.A tire-water coupled model is established and CFD technique is applied to simulating hydroplaning.The simulation results show that BNSS grooves can reduce water flow resistance and increase mean flow rate by disturbing the eddy movement in boundary layers.The drag forces of riblet and dimple surface are lower and drainage capacity is higher than those of smooth surface under the same void space on tread pattern,but it is not in dome.BNSS is a good way to promote antiskid performance without increasing additional groove space;extra tire-road noise production is therefore avoided due to groove space enlargement.
基金National Major Scientific&Technological Special Program for"High-Grade CNC and Basic Manufacturing Equipment"of China(No.2012ZX04011-031)Science and Technology Programs of Sichuan Province,China(No.2010GZ0250,No.2011GZ0075)
文摘In order to decrease the deformation and stress and increase the natural frequency of the fixed table,a method of optimization driven by the sensitivity and topology analyses is proposed.The finite element model of the fixed table is constructed and analyzed by using ANSYS software.Based on the results of static analysis and modal analysis,the maximum deformation,the maximum stress,and natural frequencies are obtained.Then,the sensitivity analysis and topology optimization are carried out to find out the parameters to be optimized.The fixed table is reconstructed according to optimal design scheme.In the comparison of the results between original model and the optimized one,the maximum deformation and stress are decreased by 71.73%and 60.27%respectively.At the same time,the natural frequencies from the first mode to the sixth mode are increased by 30.28%,29.57%,29.51%,31.52%,22.19%,and 21.80%,respectively.The method can provide technology guide for the design and optimization of machining structure.
基金National Science and Technology Supporting Program,China(No.2011BAJ02B06)Aeronautical Science Foundation of China(No.20090738003)National Natural Science Foundations of China(No.51175378,No.50775161)
文摘Jet pipe electro-hydraulic servo valve is the heart of feedback control systems,and it is one of the mechatronic components used for precision flow control application.It consists of several precision and ddicate components.The performance of the jet pipe servo valve depends on many parameters.During the developmental stage,it is very difficult to ascertain the function parameters.The steady-state analysis of jet pipe electro-hydraulic servo valve has been made to simulate its fluid characteristics （flowin,flow-out,leakage flow,recovery or load pressure,etc.） by mathematical modeling.Theoretical model was conducted on various affecting parameters on the pressure,the main flow rate of fluid,or leakage flow through the receiver holes.The major parameters studied are jet pipe nozzle diameters,receiver hole diameters,angle between the two centre-lines of receiver hole,nozzle offset,and nozzle stand-of distance.In this paper the research is important to determine and optimize the structural parameters of jet pipe servo valve.Thus,equations of the pressure and flow characteristics are set up and the optimal structural parameters of jet pipe are established.
文摘A self-tuning reaching law based sliding mode control(SMC)theory is proposed to stabilize the nonlinear continuous stirred tank reactor(CSTR).T-S fuzzy logic is used to build a global fuzzy state-space linear model.Combing the traits of SMC and CSTR,three fuzzy rules can meet the requirements of controlled system.The self-tuning switch control law which can drive the state variables to the sliding surface as soon as possible is designed to ensure the robustness of uncertain fuzzy system.Lyapunov equation is applied to proving the stability of the sliding surface.The simulations show that the proposed approach can achieve desired performance with less chattering problem.
基金National Natural Science Foundation of China(No.60872065)the Key Laboratory of Textile Science&Technology,Ministry of Education,China(No.P1111)+1 种基金the Key Laboratory of Advanced Textile Materials and Manufacturing Technology,Ministry of Education,China(No.2010001)the Priority Academic Program Development of Jiangsu Higher Education Institution,China
文摘To extract features of fabric defects effectively and reduce dimension of feature space,a feature extraction method of fabric defects based on complex contourlet transform （CCT） and principal component analysis （PCA） is proposed.Firstly,training samples of fabric defect images are decomposed by CCT.Secondly,PCA is applied in the obtained low-frequency component and part of highfrequency components to get a lower dimensional feature space.Finally,components of testing samples obtained by CCT are projected onto the feature space where different types of fabric defects are distinguished by the minimum Euclidean distance method.A large number of experimental results show that,compared with PCA,the method combining wavdet low-frequency component with PCA （WLPCA）,the method combining contourlet transform with PCA （CPCA）,and the method combining wavelet low-frequency and highfrequency components with PCA （WPCA）,the proposed method can extract features of common fabric defect types effectively.The recognition rate is greatly improved while the dimension is reduced.
基金National Science&Technology Pillar Program of China(No.2012BAC02B04)National Natural Science Foundation of China(No.41201306)
文摘High enzymatic activity is required for laccase applications.Central composite design （CCD）-based response surface methodology （RSM） can effectively increase the enzymatic activity of Pleurotus ostreatus P40 in liquid substrate fermentation.Initial screening of the nutritional components was performed using a Plackett-Burman design.The variables,namely,bran,bagasse,Tween 80,and yeast extract,were found to have statistically significant effects on laccase activity.These variables were further optimized using CCD-based RSM.Optimal concentrations for the maximum laccase activity were 8.144 2 g/L bran,50 g/L bagasse,0.424 1 mL/L Tween 80,and 2.832 5 g/L yeast extract.Under optimized conditions,the maximum measured laccase activity reached 96 480 U/L,which was close to the predicted value （104 830 U/L） by RSM.Therefore,RSM can be used to optimize culture components for laccase activity from Pieurotus ostreatus P40.
基金Key Creative Project of Shanghai Education Community,China(No.13ZZ050)Key Basic Research Project of Shanghai,China(No.12JC1400400)
文摘This work investigates synchronization of two fractional unified hyperchaotic systems via impulsive control.The stable theory about impulsive fractional equation is studied based on the stable theory about fractional linear system.Then according to the theorem proposed the sufficient condition on feedback strength and impulsive interval are established to guarantee the synchronization.Numerical simulations show the effectiveness of the theorem.
基金National Basic Research Program(973)of China(No.2010CB951102)Innovative Research Groups of the National Natural Science Foundation,China(No.51021006)National Natural Science Foundation of China(No.51079028)
文摘Increasing complexity of distributed hydrological model （DHM） has lowered the efficiency of convergence.In this study,global sensitivity analysis （SA） was introduced by combining multiobjective （MO） optimization for DHM calibration.Latin Hypercube-once at a time （LH-OAT） was adopted in global parameter SA to obtain relative sensitivity of model parameter,which can be categorized into different sensitivity levels.Two comparative study cases were conducted to present the efficiency and feasibility by combining SA with MO（SA-MO）.WetSpa model with non-dominated sorting genetic algorithm-Ⅱ （NSGA-Ⅱ） algorithm and EasyDHM model with multi-objective sequential complex evolutionary metropolis-uncertainty analysis （MOSCEM-UA）algorithm were adopted to demonstrate the general feasibility of combining SA in optimization.Results showed that the LH-OAT was globally effective in selecting high sensitivity parameters.It proves that using parameter from high sensitivity groups results in higher convergence efficiency.Study case Ⅰ showed a better Pareto front distribution and convergence compared with model calibration without SA.Study case Ⅱ indicated a more efficient convergence of parameters in sequential evolution of MOSCEM-UA under the same iteration.It indicates that SA-MO is feasible and efficient for high dimensional DHM calibration.
文摘Sale-leaseback is paid special focus on for its great application in China in recent years.By giving a detailed analysis,an analysis of the features of sale-leaseback and a study of the risks of it are given in this paper.Then a quantitative analysis of commercial real estate sale-leaseback is carried out.The scientific theoretical analysis is provided in this paper for risk assessment in commercial real estate sale-leaseback mode in China.An effective approach is put forward for sale-leaseback project evaluation and prevention of risk.A useful means is given to supervise commerciai real estate sale-leaseback mode for relevant departments and a certain contribution is made to a further sound development of commercial real estate sale-leaseback mode.
基金National Natural Science Foundation of China(No.61105114)the Key Technology R&D Program of Jiangsu Province,China(No.BE2010189)
文摘Quick detection of a small initial fault is important for an induction motor to prevent a consequent large fault.The mathematical model with basic motor equations among voltages,currents,and fluxes is analyzed and the motor model equations are described.The fault related features are extracted.An immune memory dynamic clonal strategy(IMDCS)system is applied to detecting the stator faults of induction motor.Four features are obtained from the induction motor,and then these features are given to the IMDCS system.After the motor condition has been learned by the IMDCS system,the memory set obtained in the training stage can be used to detect any fault.The proposed method is experimentally implemented on the induction motor,and the experimental results show the applicability and effectiveness of the proposed method to the diagnosis of stator winding turn faults in induction motors.
基金National Natural Science Foundation of China(No.11071110)
文摘To relax convexity assumptions imposed on the functions in theorems on sufficient conditions and duality,new concepts of generalized dI-G-type Ⅰ invexity were introduced for nondifferentiable multiobjective programming problems.Based upon these generalized invexity,G-Fritz-John （G-F-J） and G-Karnsh-Kuhn-Tucker （G-K-K-T） types sufficient optimality conditions were established for a feasible solution to be an efficient solution.Moreover,weak and strict duality results were derived for a G-Mond-Weir type dual under various types of generalized dI-G-type Ⅰ invexity assumptions.
基金National Natural Science Foundation of China(No.61273172)
文摘This paper proposes a steady-state errors correction(SSEC)method for eliminating measurement errors.This method is based on the detections of error signal E(s)and output C(s)which generate an expected output R(s).In comparison with the conventional solutions which are based on detecting the expected output R(s)and output C(s)to obtain error signal E(s),the measurement errors are eliminated even the error might be at a significant level.Moreover,it is possible that the individual debugging by regulating the coefficient K for every member of the multiple objectives achieves the optimization of the open loop gain.Therefore,this simple method can be applied to the weak coupling and multiple objectives system,which is usually controlled by complex controller.The principle of eliminating measurement errors is derived analytically,and the advantages comparing with the conventional solutions are depicted.Based on the SSEC method analysis,an application of this method for an active power filter(APF)is investigated and the effectiveness and viability of the scheme are demonstrated through the simulation and experimental verifications.
基金Scientific and Technological Research Projects in Henan,China(No.122102210165)
文摘Uncertain local flexural stiffness is recognized as one of the main barriers against the application of existing damage detection and performance degradation alarming techniques to real-world beams.Therefore,damage localization of beams with original uncertainty has been investigated to ensure their safety.For the beam before serving,it should be simply supported and subject to static load.Based on the concept of suppositional partition,a new loading pattern and mid-span displacement data processing method has been proposed.Actual local flexural stiffness value of each partition can be obtained by solving a set of linear equations.The obtained stiffness data can be used to establish the finite element model of beams.Subsequently,dynamic excitation and mode identification should be carried out for the beam in service.Mode shape curvature index is employed to detect the position of damage.It was validated by example that actual damage and original uncertainty of local flexural stiffness can be differentiated by this new method effectively.The combination of static load and dynamic excitation can keep the serviceability of beam.
基金Leading Academic Discipline Project of Shanghai Municipal Education Commission,China(No.J51801)Shanghai Second Polytechnic University Foundation,China(No.QD209008)Leading Academic Discipline Project of Shanghai Second Polytechnic University,China(No.XXKZD1302)
文摘A low-complexity algorithm is proposed in this paper in order to optimize irregular low-density parity-check （LDPC） codes.The algorithm proposed can calculate the noise threshold by means of a one-dimensional density evolution and search the optimal degree profiles with fast-convergence differential evolution,so that it has a lower complexity and a faster convergence speed.Simulation resuits show that the irregular LDPC codes optimized by the presented algorithm can also perform better than Turbo codes at moderate block length even with less computation cost.
