Electrochemical polarization measurement and electrochemical impedance spectroscopy(EIS) were used to study the corrosion inhibition effect of 1-dodecanethiol on copper in 3% NaCl solution.The results showed 1-dodecan...Electrochemical polarization measurement and electrochemical impedance spectroscopy(EIS) were used to study the corrosion inhibition effect of 1-dodecanethiol on copper in 3% NaCl solution.The results showed 1-dodecanethiol had better corrosion inhibition effect on copper.The corrosion inhibition ability of 1-dodecanethiol was decreased with the adding of benzotrizole, while the same degree of corrosion happened without benzotrizole when pH value of the media decreased to about 1.0.The above corrosion inhibition behavior was supported by SEM.展开更多
A 1-dodecanethiol-based phase-transfer protocol is developed for the extraction of noble metal ions from aqueous solution to a hydrocarbon phase, which calls for first mixing the aqueous metal ion solution with an eth...A 1-dodecanethiol-based phase-transfer protocol is developed for the extraction of noble metal ions from aqueous solution to a hydrocarbon phase, which calls for first mixing the aqueous metal ion solution with an ethanolic solution of 1-dodecanethiol, and then extracting the coordination compounds formed between noble metal ions and 1-dodecanethiol into a non-polar organic solvent. A number of characterization techniques, including inductively coupled plasma atomic emission spectroscopy, Fourier transform infrared spectroscopy, and thermogravimetric analysis demonstrate that this protocol could be applied to extract a wide variety of noble metal ions from water to dichlorometh- ane with an efficiency of 〉96%, and has high selectivity for the separation of the noble metal ions from other transition metals. It is therefore an attractive alternative for the extraction of noble metals from water, soil, or waste printed circuit boards.展开更多
A new method for preparing effective inhibition film on copper has been developed. Phenylthiourea (PT) was first absorbed to copper surface to form a monolayer. 1-Dodecanethiol (DT) was then assembled on the surface...A new method for preparing effective inhibition film on copper has been developed. Phenylthiourea (PT) was first absorbed to copper surface to form a monolayer. 1-Dodecanethiol (DT) was then assembled on the surface for modification. Finally, AC voltage was loaded on copper covered the mixed film to improve it further. After these processes, an effective inhibition film was gained because of its high charge transfer resistance and low corrosion current density shown in electrochemical impedance spectra and polarization. The inhibition efficiency was more than 97%.展开更多
文摘Electrochemical polarization measurement and electrochemical impedance spectroscopy(EIS) were used to study the corrosion inhibition effect of 1-dodecanethiol on copper in 3% NaCl solution.The results showed 1-dodecanethiol had better corrosion inhibition effect on copper.The corrosion inhibition ability of 1-dodecanethiol was decreased with the adding of benzotrizole, while the same degree of corrosion happened without benzotrizole when pH value of the media decreased to about 1.0.The above corrosion inhibition behavior was supported by SEM.
基金supported by the 100 Talents Program of the Chinese Academy of Sciences, National Natural Science Foundation of China (Nos. 21173226, 21376247)State Key Laboratory of Multiphase Complex Systems, Institute of Process Engineering, Chinese Academy of Sciences (Nos. MPCS-2011-D-08, MPCS-2010-C-02)
文摘A 1-dodecanethiol-based phase-transfer protocol is developed for the extraction of noble metal ions from aqueous solution to a hydrocarbon phase, which calls for first mixing the aqueous metal ion solution with an ethanolic solution of 1-dodecanethiol, and then extracting the coordination compounds formed between noble metal ions and 1-dodecanethiol into a non-polar organic solvent. A number of characterization techniques, including inductively coupled plasma atomic emission spectroscopy, Fourier transform infrared spectroscopy, and thermogravimetric analysis demonstrate that this protocol could be applied to extract a wide variety of noble metal ions from water to dichlorometh- ane with an efficiency of 〉96%, and has high selectivity for the separation of the noble metal ions from other transition metals. It is therefore an attractive alternative for the extraction of noble metals from water, soil, or waste printed circuit boards.
基金Subsidized with the Special Funds for the Major State Basic Research Projects G19990650 and the Chinese National Science Fund (No. 20173033).
文摘A new method for preparing effective inhibition film on copper has been developed. Phenylthiourea (PT) was first absorbed to copper surface to form a monolayer. 1-Dodecanethiol (DT) was then assembled on the surface for modification. Finally, AC voltage was loaded on copper covered the mixed film to improve it further. After these processes, an effective inhibition film was gained because of its high charge transfer resistance and low corrosion current density shown in electrochemical impedance spectra and polarization. The inhibition efficiency was more than 97%.
