从草苁蓉75%乙醇提取物中分离得到了2个单萜苷类化合物,结合其理化性质,并通过1DNMR(1 H NMR,13 C NMR)及1 H-1 H COSY、HSQC、HMBC、NOESY等多种波谱学方法进行结构鉴定,鉴定2个化合物分别为β-D-glucopyranose 1-(3,7-dimethyl-2-tran...从草苁蓉75%乙醇提取物中分离得到了2个单萜苷类化合物,结合其理化性质,并通过1DNMR(1 H NMR,13 C NMR)及1 H-1 H COSY、HSQC、HMBC、NOESY等多种波谱学方法进行结构鉴定,鉴定2个化合物分别为β-D-glucopyranose 1-(3,7-dimethyl-2-trans-6-octa-dienoate)(化合物1)和6,7-dihydrofoliamenthoic acid diglucoside(化合物2),其中化合物1为新化合物,化合物2为第1次从列当科植物中获得.展开更多
Lamellarins isolated from oceanic mollusc are a kind of pyrrole hexacyclic alkaloids.Not only have lamellarins an interesting structural feature,but also exhibit a wide various of significant biological activities.The...Lamellarins isolated from oceanic mollusc are a kind of pyrrole hexacyclic alkaloids.Not only have lamellarins an interesting structural feature,but also exhibit a wide various of significant biological activities.The open-chain lamellarins have the same structure as lamellarin which shown potent cytotoxicity cytotoxic potential.ethyl 1-(3,4-dimethoxyphenyl)-8,9-dimethoxy-2-(2,4,5-trimethoxyphenyl)pyrroloisoquinoline-3-carboxylate as a new compound and an inter mediate for synthesis of lamellarin was prepared via acylation and esterification in one pot after reaction of 1-(3,4-dimethoxybenzyl)-6,7-dimethoxyisoquinoline and 2-bromo-1-(2,4,5-trimethoxyphenyl)ethanone.The products were identified by means of IR,UV,NMR and MS measurement.展开更多
Five stems of rapeseed with abundant black microsclerotia were collected from Huangyuan County of Qinghai Province,China,and fungal isolates were obtained from the stems.They were identified based on morphology,molecu...Five stems of rapeseed with abundant black microsclerotia were collected from Huangyuan County of Qinghai Province,China,and fungal isolates were obtained from the stems.They were identified based on morphology,molecular features and specific PCR detection.The results showed that the 10 fungal isolates belonged to Verticillium longisporum lineage A1/D3.One of the 10 isolates(HW7-1)was tested for virulence on three species of rapeseed,including B.napus Zhongshuang 9,B.rapa Qingyou 9 and B.juncea Tayou 2 by conidia inoculation of HW7-1 on roots of young seedlings.Control seedlings were inoculated with V.dahliae conidia or water alone.The seedlings of these treatments were transplanted in culture mix and incubated in a growth chamber(20℃).Results suggested that the control seedlings of three cultivars appeared quite healthy,while the seedlings inoculated with HW7-1 turned yellowing leaves,seedling stunting or even death after 22 days post-inoculation.V.longisporum was re-isolated from he yellow leaves,thus fulfilling Koch's postulates.Moreover,compared to the control treatments,inoculation with HW7-1 caused flowering delay and seed yield reduction on Tayou 2 with production of microsclerotia on the stems.To our knowledge,this is the first report of V.longisporum lineage A1/D3 on rapeseed in northwestern China.展开更多
In order to further achieve the balance between the calculation accuracy and efficiency of the transient analysis of the aero-engine disc cavity system,an Optimized Time-adaptive Aerother-mal Coupling calculation(OTAC...In order to further achieve the balance between the calculation accuracy and efficiency of the transient analysis of the aero-engine disc cavity system,an Optimized Time-adaptive Aerother-mal Coupling calculation(OTAC)method has been proposed.It combines one-dimensional tran-sient calculation of air system,Conventional Sequence Staggered(CSS)method,Time-adaptive Aerothermal Coupling calculation(TAC)method and differential evolution optimization algorithm to obtain an efficient and high-precision aerothermal coupling calculation method of air system.Considering both the heat conduction in the solid domain and the flow in the fluid domain as unsteady states in the OTAC,the interaction of fluid-solid information within a single coupling time step size was implemented based on the CSS method.Furthermore,the coupling time step size was automatically adjusted with the number of iterations by using the Proportional-Integral-Deri vative(PID)controller.Results show that when compared with the traditional loosely coupling method with a fixed time step size,the computational accuracy and efficiency of the OTAC method are improved by 8.9%and 30%,respectively.Compared with the tight coupling calculation,the OTAC method can achieve a speedup of 1 to 2 orders of magnitude,while the calculation error is maintained within 6.1%.展开更多
The Secondary Air System(SAS)plays an important role in the safe operation and performance of aeroengines.The traditional 1D-3D coupling method loses information when used for secondary air systems,which affects the c...The Secondary Air System(SAS)plays an important role in the safe operation and performance of aeroengines.The traditional 1D-3D coupling method loses information when used for secondary air systems,which affects the calculation accuracy.In this paper,a Cross-dimensional Data Transmission method(CDT)from 3D to 1D is proposed by introducing flow field uniformity into the data transmission.First,a uniformity index was established to quantify the flow field parameter distribution characteristics,and a uniformity index prediction model based on the locally weighted regression method(Lowess)was established to quickly obtain the flow field information.Then,an information selection criterion in 3D to 1D data transmission was established based on the Spearman rank correlation coefficient between the uniformity index and the accuracy of coupling calculation,and the calculation method was automatically determined according to the established criterion.Finally,a modified function was obtained by fitting the ratio of the 3D mass-average parameters to the analytical solution,which are then used to modify the selected parameters at the 1D-3D interface.Taking a typical disk cavity air system as an example,the results show that the calculation accuracy of the CDT method is greatly improved by a relative 53.88%compared with the traditional 1D-3D coupling method.Furthermore,the CDT method achieves a speedup of 2 to 3 orders of magnitude compared to the 3D calculation.展开更多
基于某4缸带外部废气再循环(exhaust gas recycle,EGR)功能的自然吸气汽油机,采用1D热力学和3DCFD耦合仿真的方法研究了部分负荷工况各缸EGR分配的均匀性,并在性能台架上研究了EGR分配不均对各缸燃烧速度的影响。研究结果表明:缸内实际...基于某4缸带外部废气再循环(exhaust gas recycle,EGR)功能的自然吸气汽油机,采用1D热力学和3DCFD耦合仿真的方法研究了部分负荷工况各缸EGR分配的均匀性,并在性能台架上研究了EGR分配不均对各缸燃烧速度的影响。研究结果表明:缸内实际EGR均匀性不仅与EGR系统设计有关,同时也受到各缸进气的均匀性的影响;EGR的不合理分配会导致各缸燃烧速率不均,继而增大燃烧循环波动率。基于所建立的1D/3D耦合分析方法,对EGR分配孔板结构进行了详细仿真优化,EGR分配均匀性得到显著改善。在随后的试验中,各缸燃烧一致性明显改善。展开更多
Compared with front engine vehicle, the windward side’s flow field in cooling model of rear engine bus is complicated and it can’t be calculated by means of 1D model. For this problem, this paper has used Star-CCM t...Compared with front engine vehicle, the windward side’s flow field in cooling model of rear engine bus is complicated and it can’t be calculated by means of 1D model. For this problem, this paper has used Star-CCM to build a 3D simulation model of cooling system, engine compartment and complete vehicle. Then, it had a 1D/3D coupling calculation on cooling system with Kuli software. It could be helpful in the optimization design of the flow field of rear engine compartment and optimization match of cooling system.展开更多
Large-head variable-amplitude pump turbines(PTs) encounter serious transient hydraulic instability issues. To explore the evolution mechanisms of pressure fluctuations(PFs) and flow patterns inside large-head variable...Large-head variable-amplitude pump turbines(PTs) encounter serious transient hydraulic instability issues. To explore the evolution mechanisms of pressure fluctuations(PFs) and flow patterns inside large-head variable-amplitude PTs, the load rejection process(LRP) was investigated using a one-and three-dimensional coupled flow simulation approach. The temporal,spatial, and frequency characteristics of the fluctuating pressures were analyzed for four monitoring points using a combined time-frequency analysis approach. The results indicated that PFs during the LRP of large-head variable-amplitude PTs had a new fluctuation frequency component related to Dean vortices(DVs) in the volute, in addition to the common fluctuation frequency components related to rotor-stator interaction phenomena and local backflow vortices near the impeller inlet. The PF frequency component existed throughout the LRP and had a significant influence on the transient maximum pressure at the volute end. This study provides a useful theoretical guide for the design and optimization of large-head variable-amplitude PTs.展开更多
文摘从草苁蓉75%乙醇提取物中分离得到了2个单萜苷类化合物,结合其理化性质,并通过1DNMR(1 H NMR,13 C NMR)及1 H-1 H COSY、HSQC、HMBC、NOESY等多种波谱学方法进行结构鉴定,鉴定2个化合物分别为β-D-glucopyranose 1-(3,7-dimethyl-2-trans-6-octa-dienoate)(化合物1)和6,7-dihydrofoliamenthoic acid diglucoside(化合物2),其中化合物1为新化合物,化合物2为第1次从列当科植物中获得.
文摘Lamellarins isolated from oceanic mollusc are a kind of pyrrole hexacyclic alkaloids.Not only have lamellarins an interesting structural feature,but also exhibit a wide various of significant biological activities.The open-chain lamellarins have the same structure as lamellarin which shown potent cytotoxicity cytotoxic potential.ethyl 1-(3,4-dimethoxyphenyl)-8,9-dimethoxy-2-(2,4,5-trimethoxyphenyl)pyrroloisoquinoline-3-carboxylate as a new compound and an inter mediate for synthesis of lamellarin was prepared via acylation and esterification in one pot after reaction of 1-(3,4-dimethoxybenzyl)-6,7-dimethoxyisoquinoline and 2-bromo-1-(2,4,5-trimethoxyphenyl)ethanone.The products were identified by means of IR,UV,NMR and MS measurement.
基金supported by the Earmarked Fund for CARS-12 from National Modern Agricultural Technology System.
文摘Five stems of rapeseed with abundant black microsclerotia were collected from Huangyuan County of Qinghai Province,China,and fungal isolates were obtained from the stems.They were identified based on morphology,molecular features and specific PCR detection.The results showed that the 10 fungal isolates belonged to Verticillium longisporum lineage A1/D3.One of the 10 isolates(HW7-1)was tested for virulence on three species of rapeseed,including B.napus Zhongshuang 9,B.rapa Qingyou 9 and B.juncea Tayou 2 by conidia inoculation of HW7-1 on roots of young seedlings.Control seedlings were inoculated with V.dahliae conidia or water alone.The seedlings of these treatments were transplanted in culture mix and incubated in a growth chamber(20℃).Results suggested that the control seedlings of three cultivars appeared quite healthy,while the seedlings inoculated with HW7-1 turned yellowing leaves,seedling stunting or even death after 22 days post-inoculation.V.longisporum was re-isolated from he yellow leaves,thus fulfilling Koch's postulates.Moreover,compared to the control treatments,inoculation with HW7-1 caused flowering delay and seed yield reduction on Tayou 2 with production of microsclerotia on the stems.To our knowledge,this is the first report of V.longisporum lineage A1/D3 on rapeseed in northwestern China.
基金support of the National Natural Science Foundation of China (No.52007002)the Science Center for Gas Turbine Project,China (No.P2022-A-II-007-001)the Fundamental Research Funds for the Central Universities,China (No.NS2023010).
文摘In order to further achieve the balance between the calculation accuracy and efficiency of the transient analysis of the aero-engine disc cavity system,an Optimized Time-adaptive Aerother-mal Coupling calculation(OTAC)method has been proposed.It combines one-dimensional tran-sient calculation of air system,Conventional Sequence Staggered(CSS)method,Time-adaptive Aerothermal Coupling calculation(TAC)method and differential evolution optimization algorithm to obtain an efficient and high-precision aerothermal coupling calculation method of air system.Considering both the heat conduction in the solid domain and the flow in the fluid domain as unsteady states in the OTAC,the interaction of fluid-solid information within a single coupling time step size was implemented based on the CSS method.Furthermore,the coupling time step size was automatically adjusted with the number of iterations by using the Proportional-Integral-Deri vative(PID)controller.Results show that when compared with the traditional loosely coupling method with a fixed time step size,the computational accuracy and efficiency of the OTAC method are improved by 8.9%and 30%,respectively.Compared with the tight coupling calculation,the OTAC method can achieve a speedup of 1 to 2 orders of magnitude,while the calculation error is maintained within 6.1%.
基金supported by the National Science and Technology Major Project,China(No.2017-III-0010-0036).
文摘The Secondary Air System(SAS)plays an important role in the safe operation and performance of aeroengines.The traditional 1D-3D coupling method loses information when used for secondary air systems,which affects the calculation accuracy.In this paper,a Cross-dimensional Data Transmission method(CDT)from 3D to 1D is proposed by introducing flow field uniformity into the data transmission.First,a uniformity index was established to quantify the flow field parameter distribution characteristics,and a uniformity index prediction model based on the locally weighted regression method(Lowess)was established to quickly obtain the flow field information.Then,an information selection criterion in 3D to 1D data transmission was established based on the Spearman rank correlation coefficient between the uniformity index and the accuracy of coupling calculation,and the calculation method was automatically determined according to the established criterion.Finally,a modified function was obtained by fitting the ratio of the 3D mass-average parameters to the analytical solution,which are then used to modify the selected parameters at the 1D-3D interface.Taking a typical disk cavity air system as an example,the results show that the calculation accuracy of the CDT method is greatly improved by a relative 53.88%compared with the traditional 1D-3D coupling method.Furthermore,the CDT method achieves a speedup of 2 to 3 orders of magnitude compared to the 3D calculation.
文摘基于某4缸带外部废气再循环(exhaust gas recycle,EGR)功能的自然吸气汽油机,采用1D热力学和3DCFD耦合仿真的方法研究了部分负荷工况各缸EGR分配的均匀性,并在性能台架上研究了EGR分配不均对各缸燃烧速度的影响。研究结果表明:缸内实际EGR均匀性不仅与EGR系统设计有关,同时也受到各缸进气的均匀性的影响;EGR的不合理分配会导致各缸燃烧速率不均,继而增大燃烧循环波动率。基于所建立的1D/3D耦合分析方法,对EGR分配孔板结构进行了详细仿真优化,EGR分配均匀性得到显著改善。在随后的试验中,各缸燃烧一致性明显改善。
文摘Compared with front engine vehicle, the windward side’s flow field in cooling model of rear engine bus is complicated and it can’t be calculated by means of 1D model. For this problem, this paper has used Star-CCM to build a 3D simulation model of cooling system, engine compartment and complete vehicle. Then, it had a 1D/3D coupling calculation on cooling system with Kuli software. It could be helpful in the optimization design of the flow field of rear engine compartment and optimization match of cooling system.
基金supported by the National Natural Science Foundation of China(Grant Nos.52209108 and 52079034)Sichuan Science and Technology Program(Grant No.2023YFQ0021)+1 种基金the Natural Science Foundation of Heilongjiang Province,China(Grant No.LH2023E058)China Postdoctoral Science Foundation(Grant No.2022M720948)。
文摘Large-head variable-amplitude pump turbines(PTs) encounter serious transient hydraulic instability issues. To explore the evolution mechanisms of pressure fluctuations(PFs) and flow patterns inside large-head variable-amplitude PTs, the load rejection process(LRP) was investigated using a one-and three-dimensional coupled flow simulation approach. The temporal,spatial, and frequency characteristics of the fluctuating pressures were analyzed for four monitoring points using a combined time-frequency analysis approach. The results indicated that PFs during the LRP of large-head variable-amplitude PTs had a new fluctuation frequency component related to Dean vortices(DVs) in the volute, in addition to the common fluctuation frequency components related to rotor-stator interaction phenomena and local backflow vortices near the impeller inlet. The PF frequency component existed throughout the LRP and had a significant influence on the transient maximum pressure at the volute end. This study provides a useful theoretical guide for the design and optimization of large-head variable-amplitude PTs.
