A series of Mo-doped ZnO photocatalysts with different Mo-dopant concentrations have been prepared by a grind- ing-calcination method. The structure of these photocatalysts was characterized by a variety of methods, i...A series of Mo-doped ZnO photocatalysts with different Mo-dopant concentrations have been prepared by a grind- ing-calcination method. The structure of these photocatalysts was characterized by a variety of methods, including N2 physical adsorption, X-ray diffraction （XRD）, scanning electron microscopy （SEM）, Fourier transform infrared （FT-IR） spectroscopy, photoluminescence （PL） emission spectroscopy, and UV-vis diffuse reflectance spectroscopy （DRS）. It was found that Mo6＋ could enter into the crystal lattice of ZnO due to the radius of MO6＋ （0.065 nm） being smaller than that of Zn2＋ （0.083 nm）. XRD results indicated that Mo6＋ suppressed the growth of ZnO crystals. The FT-IR spectroscopy results showed that the ZnO with 2 wt.% Mo-doping has a higher level of surface hydroxyl groups than pure ZnO. PL spectroscopy indicated that ZnO with 2 wt.% Mo-doping also exhibited the largest reduction in the intensity of the emission peak at 390 nm caused by the recombi- nation of photogenerated hole-electron pairs. The activities of the Mo-doped ZnO photocatalysts were investigated in the pho- tocatalytic degradation of acid orange II under UV light （2 = 365 nm） irradiation. It was found that ZnO with 2 wt.% Mo-doping showed much higher photocatalytic activity and stability than pure ZnO. The high photocatalytic performance of the Mo-doped ZnO can be attributed to a great improvement in the surface properties of ZnO, higher crystallinity and lower recombination rate of photogenerated hole-electron （e-/h＋） pairs. Moreover, the undoped Mo species may exist in the form of MoO3 and form MoO3/ZnO heterojunctions which further favors the separation of e/h＋ pairs.展开更多
The fabrication of efficient catalysts to reduce nitrogen(N_(2))to ammonia(NH3)is a significant challenge for artificial N_(2) fixation under mild conditions.In this work,we demonstrated that the simultaneous introduc...The fabrication of efficient catalysts to reduce nitrogen(N_(2))to ammonia(NH3)is a significant challenge for artificial N_(2) fixation under mild conditions.In this work,we demonstrated that the simultaneous introduction of oxygen vacancies(OVs)and Mo dopants into Bi_(5)O_(7)Br nanosheets can significantly increase the activity for photocatalytic N_(2) fixation.The 1 mol% Mo-doped Bi_(5)O_(7)Br nanosheets exhibited an optimal NH_(3) generation rate of 122.9μmol g^(-1) h^(-1) and durable stability,which is attributed to their optimized conduction band position,suitable absorption edge,large number of light-switchable OVs,and improved charge carrier separation.This work provides a promising approach to design photocatalysts with light-switchable OVs for N_(2) reduction to NH_(3) under mild conditions,highlighting the wide application scope of nanostructured BiOBr-based photocatalysts as effective N_(2) fixation systems.展开更多
基金supported by the National Natural Science Foundation ofChina (21067004)the Natural Science Foundation of Jiangxi Province,China (2010GZH0048)Jiangxi Province Educatien Department of Science and Technology Project (GJJ 12344)
文摘A series of Mo-doped ZnO photocatalysts with different Mo-dopant concentrations have been prepared by a grind- ing-calcination method. The structure of these photocatalysts was characterized by a variety of methods, including N2 physical adsorption, X-ray diffraction （XRD）, scanning electron microscopy （SEM）, Fourier transform infrared （FT-IR） spectroscopy, photoluminescence （PL） emission spectroscopy, and UV-vis diffuse reflectance spectroscopy （DRS）. It was found that Mo6＋ could enter into the crystal lattice of ZnO due to the radius of MO6＋ （0.065 nm） being smaller than that of Zn2＋ （0.083 nm）. XRD results indicated that Mo6＋ suppressed the growth of ZnO crystals. The FT-IR spectroscopy results showed that the ZnO with 2 wt.% Mo-doping has a higher level of surface hydroxyl groups than pure ZnO. PL spectroscopy indicated that ZnO with 2 wt.% Mo-doping also exhibited the largest reduction in the intensity of the emission peak at 390 nm caused by the recombi- nation of photogenerated hole-electron pairs. The activities of the Mo-doped ZnO photocatalysts were investigated in the pho- tocatalytic degradation of acid orange II under UV light （2 = 365 nm） irradiation. It was found that ZnO with 2 wt.% Mo-doping showed much higher photocatalytic activity and stability than pure ZnO. The high photocatalytic performance of the Mo-doped ZnO can be attributed to a great improvement in the surface properties of ZnO, higher crystallinity and lower recombination rate of photogenerated hole-electron （e-/h＋） pairs. Moreover, the undoped Mo species may exist in the form of MoO3 and form MoO3/ZnO heterojunctions which further favors the separation of e/h＋ pairs.
文摘The fabrication of efficient catalysts to reduce nitrogen(N_(2))to ammonia(NH3)is a significant challenge for artificial N_(2) fixation under mild conditions.In this work,we demonstrated that the simultaneous introduction of oxygen vacancies(OVs)and Mo dopants into Bi_(5)O_(7)Br nanosheets can significantly increase the activity for photocatalytic N_(2) fixation.The 1 mol% Mo-doped Bi_(5)O_(7)Br nanosheets exhibited an optimal NH_(3) generation rate of 122.9μmol g^(-1) h^(-1) and durable stability,which is attributed to their optimized conduction band position,suitable absorption edge,large number of light-switchable OVs,and improved charge carrier separation.This work provides a promising approach to design photocatalysts with light-switchable OVs for N_(2) reduction to NH_(3) under mild conditions,highlighting the wide application scope of nanostructured BiOBr-based photocatalysts as effective N_(2) fixation systems.
