期刊文献+
共找到2篇文章
< 1 >
每页显示 20 50 100
Characterization of an iron oxy/hydroxide(gossan type) bearing refractory gold and silver ore by diagnostic leaching 被引量:5
1
作者 Oktay CELEP Vedat SERBEST 《Transactions of Nonferrous Metals Society of China》 SCIE EI CAS CSCD 2015年第4期1286-1297,共12页
A detailed characterization of an iron oxy/hydroxide(gossan type) bearing refractory gold/silver ore was performed with a new diagnostic approach for the development of a pretreatment process prior to cyanide leaching... A detailed characterization of an iron oxy/hydroxide(gossan type) bearing refractory gold/silver ore was performed with a new diagnostic approach for the development of a pretreatment process prior to cyanide leaching. Gold was observed to be present as native and electrum(6-24 μm in size) and associated with limonite, goethite and lepidocrocite within calcite and quartz matrix. Mineral liberation analysis(MLA) showed that electrum is found as free grains and in association with beudantite, limonite/goethite and quartz. Silver was mainly present as acanthite(Ag2S) and electrum and as inclusions within beudantite phase in the ore. The cyanide leaching tests showed that the extractions of gold and silver from the ore(d80: 50 μm) were limited to 76% and 23%, respectively, over a leaching period of 24 h. Diagnostic leaching tests coupled with the detailed mineralogical analysis of the ore suggest that the refractory gold and silver are mainly associated within iron oxide mineral phases such as limonite/goethite and jarosite-beudantite, which can be decomposed in alkaline solutions. Based on these characterizations, alkaline pretreatment of ore in potassium hydroxide solution was performed prior to cyanidation, which improved significantly the extraction of silver and gold up to 87% Ag and 90% Au. These findings suggest that alkaline leaching can be used as a new diagnostic approach to characterize the refractoriness of iron oxy/hydroxide bearing gold/silver ore and as a pretreatment method to overcome the refractoriness. 展开更多
关键词 refractory gold and silver ore CHARACTERIZATION diagnostic leaching mineral liberation analysis(mla) alkaline pretreatment
下载PDF
加拿大某地区稀土矿的工艺矿物学研究 被引量:4
2
作者 钟诚斌 徐志高 +4 位作者 张臻悦 何正艳 余军霞 周芳 池汝安 《稀土》 EI CAS CSCD 北大核心 2017年第2期11-18,共8页
加拿大某地区稀土矿稀土品位低,稀土矿物与铁白云石等脉石矿物共生伴生嵌布关系复杂,采用传统的工艺矿物学难以对稀土矿的赋存状态和粒度分布进行定量分析。因此,借助MLA、XRD、XRF和SEM对该地区所产生的矿石进行工艺矿物学研究。结果表... 加拿大某地区稀土矿稀土品位低,稀土矿物与铁白云石等脉石矿物共生伴生嵌布关系复杂,采用传统的工艺矿物学难以对稀土矿的赋存状态和粒度分布进行定量分析。因此,借助MLA、XRD、XRF和SEM对该地区所产生的矿石进行工艺矿物学研究。结果表明,矿石中轻稀土矿物主要为氟碳铈矿和独居石,其稀土品位RE_2O_3为3.66%。其它有用矿物为菱锶矿和针铁矿,品位分别为1.77%和22.91%。脉石矿物主要为铁白云石、黑云母、铁辉石。氟碳铈矿和独居石主要与菱锶矿和针铁矿相互连生与包裹,体现在氟碳铈矿与针铁矿、菱锶矿和主要脉石矿物相互穿插形成密切的嵌布关系。独居石与氟碳铈矿的嵌布关系比较密切,多分布在氟碳铈矿颗粒间及裂缝中,有时也和菱锶矿和铁辉石等矿物嵌布在一起。稀土矿中的Ce、La和Nd元素主要赋存在氟碳铈矿中。Fe元素赋存在针铁矿中Fe_2O_3占57.76%,其它主要赋存在脉石矿物铁白云石中占40.08%。当磨矿粒度在74μm所占比例为80%时,氟碳铈矿、独居石、菱锶矿和针铁矿的解离度分别为44.44%、27.71%、81.08%和34.52%。与此同时,22μm以上的氟碳铈矿、独居石、菱锶矿和针铁矿的理论回收率的预测分别为80.51%、67.75%、80.76%和85.38%。这些工艺矿物学参数为工业利用该矿的稀土选矿工艺的设计及有价元素综合回收提供理论依据。 展开更多
关键词 矿物解离分析仪(mla) 氟碳铈矿 独居石 工艺矿物
原文传递
上一页 1 下一页 到第
使用帮助 返回顶部