Bismuth molybdate （Bi2MoO6） nano-particles （NPs） were synthesized using bismuth nitrate, ammonium molybdate, citric acid and ethyl cellulose by a simple sol-gel method. The structure, morphology, opto-magnetic and...Bismuth molybdate （Bi2MoO6） nano-particles （NPs） were synthesized using bismuth nitrate, ammonium molybdate, citric acid and ethyl cellulose by a simple sol-gel method. The structure, morphology, opto-magnetic and photocatalytic properties of the obtained powder were characterized by X-ray diffraction （XRD）, Fourier transform infrared （FT-IR） spectra, high resolution scanning electron microscopy （HRSEM）, energy dispersive X-ray （EDX）, ultraviolet-visible diffuse reflectance spectra （DRS）, photoluminescence （PL） spectra and vibrating sample magnetometer （VSM） techniques. The XRD, FT-IR and EDX results indicate that the resultant powder is pure and single phase crystalline Bi2MoO6 with orthorhombic structure. The HRSEM image shows that the morphology of obtained powder consists with well defined nano-particles structure. The VSM results show superparamagnetic behavior of the obtained nano-particles. The photocatalytic activity of Bi2MoO6 nano-particles was performed. The addition of TiO2 catalyst enhances the photocatalytic activity of Bi2MoO6 nano-particles. The catalysts Bi2MoO6, TiO2 and mixed oxide catalyst Bi2MoO6-TiO2 nano-composites （NCs） were tested for the photocatalytic degradation （PCD） of 4-chlorophenol （4-CP）. It is found that the PCD efficiency of Bi2MoO6-TiO2 NCs is higher than that of pure Bi2MoO6 and TiO2 catalysts.展开更多
采用柠檬酸溶胶凝胶燃烧合成法制备了一系列组成的(Y,Tb)3Al5O12:Ce3+,Sm3+荧光粉。通过X射线衍射、荧光光谱研究了不同Sm3+离子共掺杂浓度下(Y,Tb)AG:Ce3+荧光粉的晶体结构及光致发光性能。Rietveld全图拟合(Rietveld method of wholep...采用柠檬酸溶胶凝胶燃烧合成法制备了一系列组成的(Y,Tb)3Al5O12:Ce3+,Sm3+荧光粉。通过X射线衍射、荧光光谱研究了不同Sm3+离子共掺杂浓度下(Y,Tb)AG:Ce3+荧光粉的晶体结构及光致发光性能。Rietveld全图拟合(Rietveld method of wholepattern fitting)结果表明:掺杂后样品仍为纯立方石榴石相,随着Sm3+离子共掺杂浓度的增加,样品的晶胞参数增大。在467 nm激发下,激发能由Ce3+离子向Sm3+离子单向传递,从而在617nm处出现红光发射。Tb3+离子取代不利于Ce3+离子与Sm3+离子的能量传递,同时Ce3+离子受更强的晶体场作用及与O2-离子间增强的共价性使发射主峰红移,Sm3+掺杂的TAG:Ce体系中,激发能由敏化剂Ce3+离子向激活剂Sm3+离子的传递路径包括5d→4f2F5/2,7/2(Ce3+)和7F6→5D4(Tb3+)到4G5/2→6H7/2(Sm3+)两部分。展开更多
文摘Bismuth molybdate （Bi2MoO6） nano-particles （NPs） were synthesized using bismuth nitrate, ammonium molybdate, citric acid and ethyl cellulose by a simple sol-gel method. The structure, morphology, opto-magnetic and photocatalytic properties of the obtained powder were characterized by X-ray diffraction （XRD）, Fourier transform infrared （FT-IR） spectra, high resolution scanning electron microscopy （HRSEM）, energy dispersive X-ray （EDX）, ultraviolet-visible diffuse reflectance spectra （DRS）, photoluminescence （PL） spectra and vibrating sample magnetometer （VSM） techniques. The XRD, FT-IR and EDX results indicate that the resultant powder is pure and single phase crystalline Bi2MoO6 with orthorhombic structure. The HRSEM image shows that the morphology of obtained powder consists with well defined nano-particles structure. The VSM results show superparamagnetic behavior of the obtained nano-particles. The photocatalytic activity of Bi2MoO6 nano-particles was performed. The addition of TiO2 catalyst enhances the photocatalytic activity of Bi2MoO6 nano-particles. The catalysts Bi2MoO6, TiO2 and mixed oxide catalyst Bi2MoO6-TiO2 nano-composites （NCs） were tested for the photocatalytic degradation （PCD） of 4-chlorophenol （4-CP）. It is found that the PCD efficiency of Bi2MoO6-TiO2 NCs is higher than that of pure Bi2MoO6 and TiO2 catalysts.
