Given the speed requirements of a mechanical press slider, a differential gear train is adopted instead of the belt and gear drive of a general mechanical press. Two electric motors are used to drive the differential ...Given the speed requirements of a mechanical press slider, a differential gear train is adopted instead of the belt and gear drive of a general mechanical press. Two electric motors are used to drive the differential gear train with hybrid input. Based on the working principle of a differential gear train, the angular speed equations and the power dis- tribution equations of the input-output system are established. By controlling the angular speeds of the two motors, the slider can move at different speeds. Taken a JH23-100 type mechanical press as example, the driving system is designed and the power of two motors determined. The simulated results show that the highest slider speed in the mechanical press approaches 39 mm/s only at the forging-punching stage, far less than the 232 mm/s of a general JH23-100 type mechanical press. This provides a new scheme to realize low-speed forging-punching technology from a mechanical press.展开更多
混合输入平面五杆机构具有两个自由度,其动力学模型是一个高度非线性和强耦合系统。基于李亚普诺夫函数、利用滑模变结构控制理论(slid ing mode control)设计了控制器,并对系统进行了控制仿真。仿真结果表明,在不改变机构结构和进行质...混合输入平面五杆机构具有两个自由度,其动力学模型是一个高度非线性和强耦合系统。基于李亚普诺夫函数、利用滑模变结构控制理论(slid ing mode control)设计了控制器,并对系统进行了控制仿真。仿真结果表明,在不改变机构结构和进行质量重布的情况下,就可以实现较高精度的轨迹跟踪。理论分析证明,所设计的滑模变结构控制器是全局稳定的。展开更多
文摘Given the speed requirements of a mechanical press slider, a differential gear train is adopted instead of the belt and gear drive of a general mechanical press. Two electric motors are used to drive the differential gear train with hybrid input. Based on the working principle of a differential gear train, the angular speed equations and the power dis- tribution equations of the input-output system are established. By controlling the angular speeds of the two motors, the slider can move at different speeds. Taken a JH23-100 type mechanical press as example, the driving system is designed and the power of two motors determined. The simulated results show that the highest slider speed in the mechanical press approaches 39 mm/s only at the forging-punching stage, far less than the 232 mm/s of a general JH23-100 type mechanical press. This provides a new scheme to realize low-speed forging-punching technology from a mechanical press.
文摘混合输入平面五杆机构具有两个自由度,其动力学模型是一个高度非线性和强耦合系统。基于李亚普诺夫函数、利用滑模变结构控制理论(slid ing mode control)设计了控制器,并对系统进行了控制仿真。仿真结果表明,在不改变机构结构和进行质量重布的情况下,就可以实现较高精度的轨迹跟踪。理论分析证明,所设计的滑模变结构控制器是全局稳定的。
