Experiments were conducted in an indoor soil bin filled with sandy clay loam soil. Tests were carried out with tillage tines to study the effect tool width on soil disturbance and draught. Depth of operation was held ...Experiments were conducted in an indoor soil bin filled with sandy clay loam soil. Tests were carried out with tillage tines to study the effect tool width on soil disturbance and draught. Depth of operation was held constant at 35 mm and then at 70 mm while speed was varied at three levels of 1.0, 3.6 and 9.0 km/h. The widths of the tines tested were 10, 20, 31, 40, 51, 88, 126, 163 and 200 mm. The cone penetration resistance of the soil varied from 400 to 600 kPa. Draught was measured with a load cell while soil disturbance was measured with a profile meter and meter rule. Draught increased at a decreasing rate with tine width. Quadratic models best fitted the data points with high R2 values. The increase in draught was affected by the forward speed since higher draught values were obtained at higher speed. Results show that the parameters of soil disturbance increased with increase in tine width, except height of ridge （hr）, which did not show any specific trend. The specific draught was highest （10.63 N/cm） with tine T20 while Tine T1 had the least specific draught of 5.2 N/cm.展开更多
文摘Experiments were conducted in an indoor soil bin filled with sandy clay loam soil. Tests were carried out with tillage tines to study the effect tool width on soil disturbance and draught. Depth of operation was held constant at 35 mm and then at 70 mm while speed was varied at three levels of 1.0, 3.6 and 9.0 km/h. The widths of the tines tested were 10, 20, 31, 40, 51, 88, 126, 163 and 200 mm. The cone penetration resistance of the soil varied from 400 to 600 kPa. Draught was measured with a load cell while soil disturbance was measured with a profile meter and meter rule. Draught increased at a decreasing rate with tine width. Quadratic models best fitted the data points with high R2 values. The increase in draught was affected by the forward speed since higher draught values were obtained at higher speed. Results show that the parameters of soil disturbance increased with increase in tine width, except height of ridge （hr）, which did not show any specific trend. The specific draught was highest （10.63 N/cm） with tine T20 while Tine T1 had the least specific draught of 5.2 N/cm.
