Recently the manufacture of epoxy coating and flooring materials begun to be under strong pressure to use more environmentally friendly raw materials in its composition.First tendency to reduce of solvents and diluent...Recently the manufacture of epoxy coating and flooring materials begun to be under strong pressure to use more environmentally friendly raw materials in its composition.First tendency to reduce of solvents and diluents contained in the materials appeared at the end of 90´s.This situation was supported by the Council of Europe in 2004 to reduce VOC emissions to zero till 2020.Solvent materials were thus largely replaced by solvent free materials from which the volatile substances are not released into the air.But pressure continued to increase,and over the past decade began to take centre stage water-based epoxy.On the Czech market solvent based material is still occasionally used,but predominant are solvent free materials.There are no commonly used materials containing wastes as fillers in new water-borne and solvent-free epoxy materials.Characteristics identification of the waste material as a potential filler is a set of properties that determine the limits of secondary raw materials or waste as a filler.This paper describes the basic characteristics which must be selected to meet the requirements,to affect negatively the workability,sedimentation,properties and behavior of the final floor system.Some materials must comply with special requirements,such as resistance to chemicals,etc.Next part of paper talks about utilization of polymer floors and their mechanical properties.展开更多
Nowadays, oil contamination has become a major reason for water pollution, and presents a global environmental challenge. Although many efforts have been devoted to the fabrication of oil/water separation materials, t...Nowadays, oil contamination has become a major reason for water pollution, and presents a global environmental challenge. Although many efforts have been devoted to the fabrication of oil/water separation materials, their practical applications are still hindered by their weak durability, poor chemical tolerance,environmental resistance, and potential negative impact on health and the environment. To overcome these drawbacks, this work offers a facile method to fabricate the eco-friendly and durable oil/water separation membrane fabrics by alkaline hydrolysis and silicon polyurethane coating. The X-ray photoelectron spectroscopy, scanning electron microscopy, and atomic force microscopy results demonstrate that silicon polyurethane membrane could be coated onto the surface of hydrolyzed polyester fabric and form a micro-/nano-scaled hierarchical structure. Based on this, the modified fabric could have a stable superhydrophobic property with a water contact angle higher than 150°, even after repeated washing and mechanical abrasion 800 times, as well as chemical corrosion. Moreover, the modified fabrics show excellent oil/water separation efficiency of up to 99% for various types of oil–water mixture. Therefore, this durable, eco-friendly and cost-efficient superhydrophobic fabric has great potential in large-scale oil/water separation.展开更多
[Objectives]This study was conducted to explore the most suitable irrigation integration mode for"Tinglin snow melon"in Jinshan District,Shanghai City.[Methods]With the field water holding capacity as the st...[Objectives]This study was conducted to explore the most suitable irrigation integration mode for"Tinglin snow melon"in Jinshan District,Shanghai City.[Methods]With the field water holding capacity as the standard,different upper limits of irrigation were set in the four growth stage of snow melon to investigate the effects of such three water-saving irrigation modes as single-row drip irrigation pipes,double-row drip irrigation pipes and drip arrows on the traits and yield of melon plants under the same growth conditions.[Results]The results showed that different irrigation modes had certain effects on the growth,comprehensive quality and yield of snow melon,and the drop arrow mode was better than other two modes.Under the drop arrow mode,the number of snow melons was the highest,7.34 per plant,and the yield was the highest,reaching 15463.35 kg/hm^(2),showing the best yield increasing effect.In addition,the contents of soluble solids and vitamin C in the drop arrow mode were higher than those in the drip irrigation pipe mode.[Conclusions]Compared with other irrigation methods,the drop arrow mode was more suitable for the production of snow melon.展开更多
基金supported by the project"OKTAEDR-partnership and building network."Project registration number is cz.1.07./2.4.00/31.0012.
文摘Recently the manufacture of epoxy coating and flooring materials begun to be under strong pressure to use more environmentally friendly raw materials in its composition.First tendency to reduce of solvents and diluents contained in the materials appeared at the end of 90´s.This situation was supported by the Council of Europe in 2004 to reduce VOC emissions to zero till 2020.Solvent materials were thus largely replaced by solvent free materials from which the volatile substances are not released into the air.But pressure continued to increase,and over the past decade began to take centre stage water-based epoxy.On the Czech market solvent based material is still occasionally used,but predominant are solvent free materials.There are no commonly used materials containing wastes as fillers in new water-borne and solvent-free epoxy materials.Characteristics identification of the waste material as a potential filler is a set of properties that determine the limits of secondary raw materials or waste as a filler.This paper describes the basic characteristics which must be selected to meet the requirements,to affect negatively the workability,sedimentation,properties and behavior of the final floor system.Some materials must comply with special requirements,such as resistance to chemicals,etc.Next part of paper talks about utilization of polymer floors and their mechanical properties.
基金the financial support provided by the National Natural Science Foundation of China (21808044)。
文摘Nowadays, oil contamination has become a major reason for water pollution, and presents a global environmental challenge. Although many efforts have been devoted to the fabrication of oil/water separation materials, their practical applications are still hindered by their weak durability, poor chemical tolerance,environmental resistance, and potential negative impact on health and the environment. To overcome these drawbacks, this work offers a facile method to fabricate the eco-friendly and durable oil/water separation membrane fabrics by alkaline hydrolysis and silicon polyurethane coating. The X-ray photoelectron spectroscopy, scanning electron microscopy, and atomic force microscopy results demonstrate that silicon polyurethane membrane could be coated onto the surface of hydrolyzed polyester fabric and form a micro-/nano-scaled hierarchical structure. Based on this, the modified fabric could have a stable superhydrophobic property with a water contact angle higher than 150°, even after repeated washing and mechanical abrasion 800 times, as well as chemical corrosion. Moreover, the modified fabrics show excellent oil/water separation efficiency of up to 99% for various types of oil–water mixture. Therefore, this durable, eco-friendly and cost-efficient superhydrophobic fabric has great potential in large-scale oil/water separation.
基金Shanghai Agriculture Applied Technology Development Program,China(Grant No.T20180304)Jinshan District Science and Technology Innovation Fund Project(Grant No.T20200115).
文摘[Objectives]This study was conducted to explore the most suitable irrigation integration mode for"Tinglin snow melon"in Jinshan District,Shanghai City.[Methods]With the field water holding capacity as the standard,different upper limits of irrigation were set in the four growth stage of snow melon to investigate the effects of such three water-saving irrigation modes as single-row drip irrigation pipes,double-row drip irrigation pipes and drip arrows on the traits and yield of melon plants under the same growth conditions.[Results]The results showed that different irrigation modes had certain effects on the growth,comprehensive quality and yield of snow melon,and the drop arrow mode was better than other two modes.Under the drop arrow mode,the number of snow melons was the highest,7.34 per plant,and the yield was the highest,reaching 15463.35 kg/hm^(2),showing the best yield increasing effect.In addition,the contents of soluble solids and vitamin C in the drop arrow mode were higher than those in the drip irrigation pipe mode.[Conclusions]Compared with other irrigation methods,the drop arrow mode was more suitable for the production of snow melon.
