The high spin states of the neutron-rich odd-odd 106Tc nucleus have been reinvestigated by observing prompt γ-rays from the spontaneous fission of 252Cf. A previously known collective band is confirmed and expanded, ...The high spin states of the neutron-rich odd-odd 106Tc nucleus have been reinvestigated by observing prompt γ-rays from the spontaneous fission of 252Cf. A previously known collective band is confirmed and expanded, and a new collective band is newly identified. Several levels in previous report in 106Tc are reexamined and they belong to the members of a band in 107Tc. The total Routhian surface (TRS) calculations show that the 106Tc has triaxial shape. The spins and parities as well as the configurations for these bands have been tentatively assigned according to the analysis of the angular momentum alignments.展开更多
Two 15Cr–9Ni–Nb austenitic stainless steel weld metals with 2.5%Si and 3.5%Si(namely 2.5Si and 3.5Si samples,respectively)were designed and prepared through tungsten inert gas(TIG)welding and then hold at 800℃ or ...Two 15Cr–9Ni–Nb austenitic stainless steel weld metals with 2.5%Si and 3.5%Si(namely 2.5Si and 3.5Si samples,respectively)were designed and prepared through tungsten inert gas(TIG)welding and then hold at 800℃ or 900℃ for 3 h for stabilization.The microstructure and mechanical properties were investigated both for the as-welded and after-stabilization heat treatment(SHT)weld metals.There are 3.0–4.0%martensite and 2.5–3.5%δferrite in the 2.5Si as-welded weld metal and 6.0–7.0%δferrite in the 3.5Si as-welded weld metal.After SHT,a large amount of martensite formed in the 2.5Si weld metal,andδ→γtransition occurred during the SHT process both for the 2.5Si and 3.5Si weld metals.There were a large amount of coarse NbC and few nanoscale NbC in the as-welded weld metal.During the SHT,a large amount of nanoscale NbC formed in the matrix,while a large number of G phases formed at the austenite grain boundaries and theδ/γinterfaces.The decrease in solid solution C andδferrite content led to the decline of the yield strength of the weld metal after SHT.The martensite formed in 2.5Si weld metal after SHT had less effect on strength because of its low carbon content.The G phases formed during the SHT reduced the impact energy of the weld metal because it promoted the intergranular fracture,while theδ→γtransition reduced the amount of theδ/γinterfaces and avoided the intergranular fracture,which was beneficial for the impact toughness of the weld metals.展开更多
基金Supported by National Natural Science Foundation of China (10575057, 10775078)Major State Basic Research Development Program (2007CB815005)+1 种基金Special Program of Higher Education Science Foundation (20070003149)U. S. Department of Energy (DE-FG05-88ER40407, DE-AC03-76SF00098)
文摘The high spin states of the neutron-rich odd-odd 106Tc nucleus have been reinvestigated by observing prompt γ-rays from the spontaneous fission of 252Cf. A previously known collective band is confirmed and expanded, and a new collective band is newly identified. Several levels in previous report in 106Tc are reexamined and they belong to the members of a band in 107Tc. The total Routhian surface (TRS) calculations show that the 106Tc has triaxial shape. The spins and parities as well as the configurations for these bands have been tentatively assigned according to the analysis of the angular momentum alignments.
基金financially supported by the China Institute of Atomic Energy(E141L803J1)the innovation project of Shenyang National Laboratory for Materials Science(SYNL-2022).
文摘Two 15Cr–9Ni–Nb austenitic stainless steel weld metals with 2.5%Si and 3.5%Si(namely 2.5Si and 3.5Si samples,respectively)were designed and prepared through tungsten inert gas(TIG)welding and then hold at 800℃ or 900℃ for 3 h for stabilization.The microstructure and mechanical properties were investigated both for the as-welded and after-stabilization heat treatment(SHT)weld metals.There are 3.0–4.0%martensite and 2.5–3.5%δferrite in the 2.5Si as-welded weld metal and 6.0–7.0%δferrite in the 3.5Si as-welded weld metal.After SHT,a large amount of martensite formed in the 2.5Si weld metal,andδ→γtransition occurred during the SHT process both for the 2.5Si and 3.5Si weld metals.There were a large amount of coarse NbC and few nanoscale NbC in the as-welded weld metal.During the SHT,a large amount of nanoscale NbC formed in the matrix,while a large number of G phases formed at the austenite grain boundaries and theδ/γinterfaces.The decrease in solid solution C andδferrite content led to the decline of the yield strength of the weld metal after SHT.The martensite formed in 2.5Si weld metal after SHT had less effect on strength because of its low carbon content.The G phases formed during the SHT reduced the impact energy of the weld metal because it promoted the intergranular fracture,while theδ→γtransition reduced the amount of theδ/γinterfaces and avoided the intergranular fracture,which was beneficial for the impact toughness of the weld metals.
