The method based on solvent parameters(mass,cycle of acidification, and autodeposition time), combined with response surface methodology(RSM) modeling and optimization, has been developed for maximizing ^(210)Po activ...The method based on solvent parameters(mass,cycle of acidification, and autodeposition time), combined with response surface methodology(RSM) modeling and optimization, has been developed for maximizing ^(210)Po activity in tea samples, as observed by an alpha spectrometer. RSM based on 3-factor and 5-level composite center design was used to obtain the optimal combination of solvent conditions. As solvent parameters for ^(210)Po activity, different masses(0.5, 0.75, 1, 1.5, and 2 g), different cycles of acidification(2, 3, 4, 5, and 6 times), and different autodeposition times(2, 3, 4, 5, and 6 h) were studied. The 3D response surface plot and the contour plot derived from the mathematical models were used to determine the optimal conditions. According to the obtained results, the experimental value of ^(210)Po activity was in good agreement(R^2=0.96) with the value predicted by the model. We found a favorable effect of mass on the ^(210)Po activity(p\0.05).展开更多
The present study aims at measuring the activity concentrations of ^210Po and ^210Pb in the potable water of Eloor, a major industrial belt in the Ernakulam district of Kerala, India with an aim of evaluating resultan...The present study aims at measuring the activity concentrations of ^210Po and ^210Pb in the potable water of Eloor, a major industrial belt in the Ernakulam district of Kerala, India with an aim of evaluating resultant ingestion dose to critical population. The industrial units located in Eloor discharge their treated effluents into the river Periyar and the surrounding environs. The two major industries of interest with respect to NORMs are the fertilizer plant, processing rock phosphate and the monazite processing plant, which had been in operation for the last 50 years. For sampling, Eloor region was divided into four zones and a total of 55 water samples from different locations were collected and analysed as per standard analytical procedure manual of BARC. The ^210Po concentration ranged between 0.3 to 4.7 mBq.L^-1 and ^210Pb ranged from 0.6 to 4.3 mBq.L^-1. All values are well below the limit of 0.1 Bq.Ll recommended by World Health Organization. Statistical analysis shows a good co-relation between ^210Po and ^210Pb in the water samples analyzed and the mean activity concentration is found to be relatively high in the western region of Eloor compared to other regions. The annual effective dose equivalent to man from ^210Po and ^210Pb through drinking water intake were estimated and found to be 1.13 μSv.y^-1 and 0.99 μSv.y^-1 respectively, which is well below the reference level of committed effective dose （100 μSv.y^-1） recommended by WHO.展开更多
文摘The method based on solvent parameters(mass,cycle of acidification, and autodeposition time), combined with response surface methodology(RSM) modeling and optimization, has been developed for maximizing ^(210)Po activity in tea samples, as observed by an alpha spectrometer. RSM based on 3-factor and 5-level composite center design was used to obtain the optimal combination of solvent conditions. As solvent parameters for ^(210)Po activity, different masses(0.5, 0.75, 1, 1.5, and 2 g), different cycles of acidification(2, 3, 4, 5, and 6 times), and different autodeposition times(2, 3, 4, 5, and 6 h) were studied. The 3D response surface plot and the contour plot derived from the mathematical models were used to determine the optimal conditions. According to the obtained results, the experimental value of ^(210)Po activity was in good agreement(R^2=0.96) with the value predicted by the model. We found a favorable effect of mass on the ^(210)Po activity(p\0.05).
文摘The present study aims at measuring the activity concentrations of ^210Po and ^210Pb in the potable water of Eloor, a major industrial belt in the Ernakulam district of Kerala, India with an aim of evaluating resultant ingestion dose to critical population. The industrial units located in Eloor discharge their treated effluents into the river Periyar and the surrounding environs. The two major industries of interest with respect to NORMs are the fertilizer plant, processing rock phosphate and the monazite processing plant, which had been in operation for the last 50 years. For sampling, Eloor region was divided into four zones and a total of 55 water samples from different locations were collected and analysed as per standard analytical procedure manual of BARC. The ^210Po concentration ranged between 0.3 to 4.7 mBq.L^-1 and ^210Pb ranged from 0.6 to 4.3 mBq.L^-1. All values are well below the limit of 0.1 Bq.Ll recommended by World Health Organization. Statistical analysis shows a good co-relation between ^210Po and ^210Pb in the water samples analyzed and the mean activity concentration is found to be relatively high in the western region of Eloor compared to other regions. The annual effective dose equivalent to man from ^210Po and ^210Pb through drinking water intake were estimated and found to be 1.13 μSv.y^-1 and 0.99 μSv.y^-1 respectively, which is well below the reference level of committed effective dose （100 μSv.y^-1） recommended by WHO.
