The equalization of Ti 6Al 4V alloy welded joint with base metal on corrosion resistance, strength and ductility was studied. The solidification microstructure is transformed from 650 μm columnar grains to 100 μm eq...The equalization of Ti 6Al 4V alloy welded joint with base metal on corrosion resistance, strength and ductility was studied. The solidification microstructure is transformed from 650 μm columnar grains to 100 μm equiaxed grains by scanning electron beam welding. The anodic polarization curve of 150 μm equiaxed grains coincides with that of base metal. Equal corrosion resistance between weld metal and base metal was obtained. Uniform microstructure and solute distribution are the basis of equalization. Corrosion rate of weld with 150 μm equiaxed grains is the lowest, 2.45 times lower than that of 650 μm columnar grains. Weld strength is 98% as much as that of base metal, yield strength ratio is 99.5%, which is 3.6% higher than that of base metal.展开更多
利用QBA S IC语言,对大型管道焊接件的正交相贯线坡口(三维曲线)的加工进行数控编程,有效地提高了数控工艺员的工作效率。根据本文的基本思想,在其它类型的数控编程方面,只需要建立相应的数学模型即可进行,该方法可有效降低生产成本,具...利用QBA S IC语言,对大型管道焊接件的正交相贯线坡口(三维曲线)的加工进行数控编程,有效地提高了数控工艺员的工作效率。根据本文的基本思想,在其它类型的数控编程方面,只需要建立相应的数学模型即可进行,该方法可有效降低生产成本,具有广泛的推广意义。展开更多
Welding deformations can be predicted by inherent strains that are assumed to be distributed in the welds and nearby area. This method is more convenient compared with the thermo elasto plastic finite element method b...Welding deformations can be predicted by inherent strains that are assumed to be distributed in the welds and nearby area. This method is more convenient compared with the thermo elasto plastic finite element method because only elastic analysis is necessary. The problem is how to know the inherent strains in advance during deformation analysis. The relations between inherent strains and welding parameters based on some experimental curves and a 3 D FEM model were introduced. According to this study, the longitudinal and transverse inherent strains that are the most important factors on welding deformations can be determined. The effectiveness of the proposed methods is demonstrated through the deformation analysis of a large welded cylinder with multipass welds as an example.展开更多
文摘The equalization of Ti 6Al 4V alloy welded joint with base metal on corrosion resistance, strength and ductility was studied. The solidification microstructure is transformed from 650 μm columnar grains to 100 μm equiaxed grains by scanning electron beam welding. The anodic polarization curve of 150 μm equiaxed grains coincides with that of base metal. Equal corrosion resistance between weld metal and base metal was obtained. Uniform microstructure and solute distribution are the basis of equalization. Corrosion rate of weld with 150 μm equiaxed grains is the lowest, 2.45 times lower than that of 650 μm columnar grains. Weld strength is 98% as much as that of base metal, yield strength ratio is 99.5%, which is 3.6% higher than that of base metal.
基金National Natural Science Foundation ofChina!( No. 592 752 0 3)
文摘Welding deformations can be predicted by inherent strains that are assumed to be distributed in the welds and nearby area. This method is more convenient compared with the thermo elasto plastic finite element method because only elastic analysis is necessary. The problem is how to know the inherent strains in advance during deformation analysis. The relations between inherent strains and welding parameters based on some experimental curves and a 3 D FEM model were introduced. According to this study, the longitudinal and transverse inherent strains that are the most important factors on welding deformations can be determined. The effectiveness of the proposed methods is demonstrated through the deformation analysis of a large welded cylinder with multipass welds as an example.
