In the water modeling experiments, three cases were considered, i. e, , a bare tundish, a tundish equipped with a turbulence inhibitor, and a rectangular tundish equipped with weirs （dams） and a turbulence inhibitor...In the water modeling experiments, three cases were considered, i. e, , a bare tundish, a tundish equipped with a turbulence inhibitor, and a rectangular tundish equipped with weirs （dams） and a turbulence inhibitor. Comparing the RTD curves, inclusion separation, and the result of the streamline experiment, it can be found that the tundish equipped with weirs （dams） and a turbulence inhibitor has a great effect on the flow field and the inclusion separation when compared with the sole use or no use of the turbulent inhibitor or weirs （dams）. In addition, the enlargement of the distance between the weir and dam will result in a better effect when the tundish equipped with weirs （dam） and a turbulence inhibitor was used.展开更多
Tundish is an important metallurgical reactor in the continuous castingprocess. In order to control the fluid flow in tundish and thus take full advantage of the residencetime available for the removal of inclusions f...Tundish is an important metallurgical reactor in the continuous castingprocess. In order to control the fluid flow in tundish and thus take full advantage of the residencetime available for the removal of inclusions from molten steel, the effect of weir and dam on thefluid flow has been studied in a water model based on the characteristic number Froude and Reynoldnumber similarity criteria. The residence time distribution curves of the flow were measured bySG800. The optimum arrangement of darn and weir and the nonstationary flow in tundish werediscussed. The results show that the combination of weir and dam is benefit for the flow pattern intundish, weir can prevent the upper recirculating flow, dam can cut off the bottom flow and turn toupwards, it is advantageous to separate the nonmetallic inclusions. Furthermore, it is important toexceed the critical depth of bath during exchange ladles, not only for the inclusion floatation butalso for avoiding tundish slag drainage earlier.展开更多
【目的】推求双曲线型薄壁堰堰流的基本方程式,确定双曲线型薄壁堰的流量系数,为实际工程中流量的控制和测量提供参考。【方法】根据双曲线构建了双曲线型薄壁堰,通过能量方程式推导其流量的计算公式;数值模拟了4种不同堰顶水头的过流能...【目的】推求双曲线型薄壁堰堰流的基本方程式,确定双曲线型薄壁堰的流量系数,为实际工程中流量的控制和测量提供参考。【方法】根据双曲线构建了双曲线型薄壁堰,通过能量方程式推导其流量的计算公式;数值模拟了4种不同堰顶水头的过流能力,根据模拟的流量数据利用最小二乘法拟合流量与堰顶水头的关系式,与理论推求的堰流基本公式相结合确定双曲线型薄壁堰的流量系数,辅以RNGk-ε湍流模型数值求解气液两相流时均方程;使用半隐式SIMPLE(Semi-implicit method for pressure-linked equations)算法求解速度与压力耦合方程组,并用VOF(Volume of fluid)法模拟自由水面。【结果】理论公式计算的流量与数值模拟的流量相差甚微,相对误差在0.3%以内,证明本研究推求公式正确。【结论】双曲线型薄壁堰的流量与堰顶水头成正比关系,该关系为流量的控制和测量提供了便利。展开更多
文摘In the water modeling experiments, three cases were considered, i. e, , a bare tundish, a tundish equipped with a turbulence inhibitor, and a rectangular tundish equipped with weirs （dams） and a turbulence inhibitor. Comparing the RTD curves, inclusion separation, and the result of the streamline experiment, it can be found that the tundish equipped with weirs （dams） and a turbulence inhibitor has a great effect on the flow field and the inclusion separation when compared with the sole use or no use of the turbulent inhibitor or weirs （dams）. In addition, the enlargement of the distance between the weir and dam will result in a better effect when the tundish equipped with weirs （dam） and a turbulence inhibitor was used.
文摘Tundish is an important metallurgical reactor in the continuous castingprocess. In order to control the fluid flow in tundish and thus take full advantage of the residencetime available for the removal of inclusions from molten steel, the effect of weir and dam on thefluid flow has been studied in a water model based on the characteristic number Froude and Reynoldnumber similarity criteria. The residence time distribution curves of the flow were measured bySG800. The optimum arrangement of darn and weir and the nonstationary flow in tundish werediscussed. The results show that the combination of weir and dam is benefit for the flow pattern intundish, weir can prevent the upper recirculating flow, dam can cut off the bottom flow and turn toupwards, it is advantageous to separate the nonmetallic inclusions. Furthermore, it is important toexceed the critical depth of bath during exchange ladles, not only for the inclusion floatation butalso for avoiding tundish slag drainage earlier.
文摘【目的】推求双曲线型薄壁堰堰流的基本方程式,确定双曲线型薄壁堰的流量系数,为实际工程中流量的控制和测量提供参考。【方法】根据双曲线构建了双曲线型薄壁堰,通过能量方程式推导其流量的计算公式;数值模拟了4种不同堰顶水头的过流能力,根据模拟的流量数据利用最小二乘法拟合流量与堰顶水头的关系式,与理论推求的堰流基本公式相结合确定双曲线型薄壁堰的流量系数,辅以RNGk-ε湍流模型数值求解气液两相流时均方程;使用半隐式SIMPLE(Semi-implicit method for pressure-linked equations)算法求解速度与压力耦合方程组,并用VOF(Volume of fluid)法模拟自由水面。【结果】理论公式计算的流量与数值模拟的流量相差甚微,相对误差在0.3%以内,证明本研究推求公式正确。【结论】双曲线型薄壁堰的流量与堰顶水头成正比关系,该关系为流量的控制和测量提供了便利。
