Based on the slip-line field theory, a two-dimensional slip failure mechanism with mesh-like rigid block system was constructed to analyze the ultimate bearing capacity problems of rough foundation within the framewor...Based on the slip-line field theory, a two-dimensional slip failure mechanism with mesh-like rigid block system was constructed to analyze the ultimate bearing capacity problems of rough foundation within the framework of the upper bound limit analysis theorem. In the velocity discontinuities in transition area, the velocity changes in radial and tangent directions are allowed. The objective functions of the stability problems of geotechnical structures are obtained by equating the work rate of external force to internal dissipation along the velocity discontinuities, and then the objective functions are transformed as an upper-bound mathematic optimization model. The upper bound solutions for the objective functions are obtained by use of the nonlinear sequential quadratic programming and interior point method. From the numerical results and comparative analysis, it can be seen that the method presented in this work gives better calculation results than existing upper bound methods and can be used to establish the more accurate plastic collapse load for the ultimate bearing capacity of rough foundation.展开更多
We discuss how to determine and combine upper limits based on observed events and estimated back- grounds with a Bayesian method, when insignificant signals are observed in independent measurements. In addition to som...We discuss how to determine and combine upper limits based on observed events and estimated back- grounds with a Bayesian method, when insignificant signals are observed in independent measurements. In addition to some general features deduced from the analytical formulae, systematic numerical results are obtained by a C＋＋ program （CULBA） for low-count experiments, which can be used as a reference to combine two upper limits.展开更多
The upper bound limit analysis(UBLA)is one of the key research directions in geotechnical engineering and is widely used in engineering practice.UBLA assumes that the slip surface with the minimum factor of safety(FSm...The upper bound limit analysis(UBLA)is one of the key research directions in geotechnical engineering and is widely used in engineering practice.UBLA assumes that the slip surface with the minimum factor of safety(FSmin)is the critical slip surface,and then applies it to slope stability analysis.However,the hypothesis of UBLA has not been systematically verified,which may be due to the fact that the traditional numerical method is difficult to simulate the large deformation.In this study,in order to systematically verify the assumption of UBLA,material point method(MPM),which is suitable to simulate the large deformation of continuous media,is used to simulate the whole process of the slope failure,including the large-scale transportation and deposition of soil mass after slope failure.And a series of comparative studies are conducted on the stability of cohesive slopes using UBLA and MPM.The proposed study indicated that the slope angle,internal friction angle and cohesion have a remarkable effect on the slip surface of the cohesive slope.Also,for stable slopes,the calculation results of the two are relatively close.However,for unstable slopes,the slider volume determined by the UBLA is much smaller than the slider volume determined by the MPM.In other words,for unstable slopes,the critical slip surface of UBLA is very different from the slip surface when the slope failure occurs,and when the UBLA is applied to the stability analysis of unstable slope,it will lead to extremely unfavorable results.展开更多
基金Projects(51078359, 51208522) supported by the National Natural Science Foundation of ChinaProjects(20110491269, 2012T50708) supported by China Postdoctoral Science FoundationProject supported by Postdoctoral Science Foundation of Central South University, China
文摘Based on the slip-line field theory, a two-dimensional slip failure mechanism with mesh-like rigid block system was constructed to analyze the ultimate bearing capacity problems of rough foundation within the framework of the upper bound limit analysis theorem. In the velocity discontinuities in transition area, the velocity changes in radial and tangent directions are allowed. The objective functions of the stability problems of geotechnical structures are obtained by equating the work rate of external force to internal dissipation along the velocity discontinuities, and then the objective functions are transformed as an upper-bound mathematic optimization model. The upper bound solutions for the objective functions are obtained by use of the nonlinear sequential quadratic programming and interior point method. From the numerical results and comparative analysis, it can be seen that the method presented in this work gives better calculation results than existing upper bound methods and can be used to establish the more accurate plastic collapse load for the ultimate bearing capacity of rough foundation.
基金Supported by National Natural Science Foundation of China(NSFC)(11005115),Joint Funds of the NSFC and Chinese Academia Sinica's Big Scientific Apparatus(U1232109)
文摘We discuss how to determine and combine upper limits based on observed events and estimated back- grounds with a Bayesian method, when insignificant signals are observed in independent measurements. In addition to some general features deduced from the analytical formulae, systematic numerical results are obtained by a C＋＋ program （CULBA） for low-count experiments, which can be used as a reference to combine two upper limits.
基金financially supported by the National Natural Science Foundation of China(No.51878668)the Guizhou Provincial Department of Transportation Foundation(Nos.2017-123-033,2018-123-040)+1 种基金the Innovation-Driven Project of Central South University(No.2016CX012)the Science and Technology Project Plan for Key Projects of Jiangxi Transportation Department(No.2019C0011)
文摘The upper bound limit analysis(UBLA)is one of the key research directions in geotechnical engineering and is widely used in engineering practice.UBLA assumes that the slip surface with the minimum factor of safety(FSmin)is the critical slip surface,and then applies it to slope stability analysis.However,the hypothesis of UBLA has not been systematically verified,which may be due to the fact that the traditional numerical method is difficult to simulate the large deformation.In this study,in order to systematically verify the assumption of UBLA,material point method(MPM),which is suitable to simulate the large deformation of continuous media,is used to simulate the whole process of the slope failure,including the large-scale transportation and deposition of soil mass after slope failure.And a series of comparative studies are conducted on the stability of cohesive slopes using UBLA and MPM.The proposed study indicated that the slope angle,internal friction angle and cohesion have a remarkable effect on the slip surface of the cohesive slope.Also,for stable slopes,the calculation results of the two are relatively close.However,for unstable slopes,the slider volume determined by the UBLA is much smaller than the slider volume determined by the MPM.In other words,for unstable slopes,the critical slip surface of UBLA is very different from the slip surface when the slope failure occurs,and when the UBLA is applied to the stability analysis of unstable slope,it will lead to extremely unfavorable results.
