Nearly-zero energy buildings (NZEB) would effectively improve building energy efficiency and promote building electrification. By using a carbon emission model integrated into a bottom-up mid-to-long term energy consu...Nearly-zero energy buildings (NZEB) would effectively improve building energy efficiency and promote building electrification. By using a carbon emission model integrated into a bottom-up mid-to-long term energy consumption model, this study analyzes the contribution of NZEB standards to carbon emission targets in the urban area of China by 2060. Three scenarios are set, namely BAU, steady development (S1), and high-speed development (S2). For BAU, the total carbon emissions will reach a peak of 1.94 Gt CO_(2) by 2040. In S1 scenario, total building carbon emissions will reach the peak of 1.72 Gt CO_(2) by 2030. In S2 scenario, the carbon emissions will reach a peak by 2025 with 1.64 Gt CO_(2). Under S1 scenario, which features consistency with NZEB market development and periodic improvement of building energy-efficiency standards, the carbon emission peak in 2030 will be accomplished. To achieve carbon neutrality by 2060, the upgrading of building energy standards to NZEB will contribute 50.1%, while zero-carbon electricity contribution is 49.9%. It is concluded that 2025, 2030, and 2035 could be set as mandatory enforcement years for ultra-low energy buildings, NZEB and zero energy building (ZEB), respectively.展开更多
For ultra-low-carbon(ULC)steel production,the higher oxygen content before Ruhrstahl-Heraeus(RH)decarburization(de-C)treatment could shorten the de-C time in the RH degasser.However,this would lead to oxidation rates ...For ultra-low-carbon(ULC)steel production,the higher oxygen content before Ruhrstahl-Heraeus(RH)decarburization(de-C)treatment could shorten the de-C time in the RH degasser.However,this would lead to oxidation rates being exceeded by molten steel production,affecting ULC steel surface quality.In this work,a carbon powder addition(CPA)process was proposed to reduce the dissolved oxygen content at the end of RH de-C through addition of carbon powder to molten steel in the vacuum vessel.Carbon and oxygen behavior during the CPA and conventional process was then studied.The results demonstrated that the de-C rate with CPA was lower compared to the conventional process,but the carbon content at the end of de-C presented no difference.The de-C reaction for CPA process took place in the four reaction sites:(1)within the bulk steel where the spontaneous CO bubbles form;(2)splashing area on the liquid steel surface;(3)Ar bubble surface;(4)molten steel surface.The CPA process could significantly reduce the dissolved oxygen content at the end of de-C,the sum content of FeO and MnO in the slag,the aluminum consumption,and the defect rate of rolled products.This was beneficial in improving ULC steel cleanliness.展开更多
基金This study was financially supported by the National Key R&D Program of China“Research on Optimal Configuration and Demand Response of Energy Storage Technology in Nearly-zero Energy Community(2019YFE0193100)”.
文摘Nearly-zero energy buildings (NZEB) would effectively improve building energy efficiency and promote building electrification. By using a carbon emission model integrated into a bottom-up mid-to-long term energy consumption model, this study analyzes the contribution of NZEB standards to carbon emission targets in the urban area of China by 2060. Three scenarios are set, namely BAU, steady development (S1), and high-speed development (S2). For BAU, the total carbon emissions will reach a peak of 1.94 Gt CO_(2) by 2040. In S1 scenario, total building carbon emissions will reach the peak of 1.72 Gt CO_(2) by 2030. In S2 scenario, the carbon emissions will reach a peak by 2025 with 1.64 Gt CO_(2). Under S1 scenario, which features consistency with NZEB market development and periodic improvement of building energy-efficiency standards, the carbon emission peak in 2030 will be accomplished. To achieve carbon neutrality by 2060, the upgrading of building energy standards to NZEB will contribute 50.1%, while zero-carbon electricity contribution is 49.9%. It is concluded that 2025, 2030, and 2035 could be set as mandatory enforcement years for ultra-low energy buildings, NZEB and zero energy building (ZEB), respectively.
基金financially supported by the National Natural Science Foundation of China(No.51874021)Fundamental Research Funds for the Central Universities of China(No.FRF-IC-18-002)State Key Laboratory of Advanced Metallurgy Foundation of China(No.41618019)
文摘For ultra-low-carbon(ULC)steel production,the higher oxygen content before Ruhrstahl-Heraeus(RH)decarburization(de-C)treatment could shorten the de-C time in the RH degasser.However,this would lead to oxidation rates being exceeded by molten steel production,affecting ULC steel surface quality.In this work,a carbon powder addition(CPA)process was proposed to reduce the dissolved oxygen content at the end of RH de-C through addition of carbon powder to molten steel in the vacuum vessel.Carbon and oxygen behavior during the CPA and conventional process was then studied.The results demonstrated that the de-C rate with CPA was lower compared to the conventional process,but the carbon content at the end of de-C presented no difference.The de-C reaction for CPA process took place in the four reaction sites:(1)within the bulk steel where the spontaneous CO bubbles form;(2)splashing area on the liquid steel surface;(3)Ar bubble surface;(4)molten steel surface.The CPA process could significantly reduce the dissolved oxygen content at the end of de-C,the sum content of FeO and MnO in the slag,the aluminum consumption,and the defect rate of rolled products.This was beneficial in improving ULC steel cleanliness.
