A two-component waterborne polyurethane(2K-WPU) was prepared by mixing water-soluble acrylic resin and hexamethylene diisocyanate biuret, and then diluted for phase inversion with water. Compared with water-soluble ac...A two-component waterborne polyurethane(2K-WPU) was prepared by mixing water-soluble acrylic resin and hexamethylene diisocyanate biuret, and then diluted for phase inversion with water. Compared with water-soluble acrylic resin, the phase inversion of 2K-WPU occurs at lower water content. It is indicated by TEM that 2K-WPU parti-cles show a core-shell structure, in which HDI biuret is encapsulated by hydrophilic acrylic resin. 2K-WPU emulsion with HDI biuret has larger particle size and narrower distribution index, while for 2K-WPU emulsion with HDI iso-cyanurate, the latex not only has large particle size, but also has two-peak distribution. FTIR shows that the reaction be-tween HDI biuret and acrylic resin can complete in 12h. In addition, studies on effect of composition of acrylic resin on performance of 2K-WPU show that narrowing the polar difference between water-soluble acrylic resin and HDI biuret and improving the miscibility of two components are the key to prepare the transparent and high gloss films with high crosslinking density.展开更多
A shallow crustal velocity structure(above 10 km depth) is essential for understanding the crustal structures and deformation and assessing the exploration prospect of natural resources, and also provides priori infor...A shallow crustal velocity structure(above 10 km depth) is essential for understanding the crustal structures and deformation and assessing the exploration prospect of natural resources, and also provides priori information for imaging deeper crustal and mantle structure. Passive-source seismic methods are cost-effective and advantageous for regional-scale imaging of shallow crustal structures compared to active-source methods. Among these passive methods, techniques utilizing receiver function waveforms and/or body-wave amplitude ratios have recently gained prominence due to their relatively high spatial resolution. However, in basin regions, reverberations caused by near-surface unconsolidated sedimentary layers often introduce strong non-uniqueness and uncertainty, limiting the applicability of such methods. To address these challenges, we propose a two-step inversion method that uses multi-frequency P-RF waveforms and P-RF horizontal-to-vertical amplitude ratios. Synthetic tests indicate that our two-step inversion method can mitigate the non-uniqueness of the inversion and enhance the stability of the results. Applying this method to teleseismic data from a linear seismic array across the sedimentary basins in Northeast China, we obtain a high-resolution image of the shallow crustal S-wave velocity structure along the array. Our results reveal significant differences between the basins and mountains. The identification of low-velocity anomalies(<2.8 km s^(-1)) at depths less than 1.0 km beneath the Erlian Basin and less than 2.5 km beneath the Songliao Basin suggests the existence of sedimentary layers. Moreover, the high-velocity anomalies(~3.4–3.8 km s^(-1)) occurring at depths greater than 7 km in the Songliao Basin may reflect mafic intrusions emplaced during the Early Cretaceous. Velocity anomaly distribution in our imaging result is consistent with the location of the major faults, uplifts, and sedimentary depressions, as well as active-source seismic results. This application further validates the e展开更多
D-T_(2)two-dimensional nuclear magnetic resonance(2D NMR)logging technology can distinguish pore fluid types intuitively,and it is widely used in oil and gas exploration.Many 2D NMR inversion methods(e.g.,truncated si...D-T_(2)two-dimensional nuclear magnetic resonance(2D NMR)logging technology can distinguish pore fluid types intuitively,and it is widely used in oil and gas exploration.Many 2D NMR inversion methods(e.g.,truncated singular value decomposition(TSVD),Butler-Reds-Dawson(BRD),LM-norm smoothing,and TIST-L1 regularization methods)have been proposed successively,but most are limited to numerical simulations.This study focused on the applicability of different inversion methods for NMR logging data of various acquisition sequences,from which the optimal inversion method was selected based on the comparative analysis.First,the two-dimensional NMR logging principle was studied.Then,these inversion methods were studied in detail,and the precision and computational efficiency of CPMG and diffusion editing(DE)sequences obtained from oil-water and gas-water models were compared,respectively.The inversion results and calculation time of truncated singular value decomposition(TSVD),Butler-Reds-Dawson(BRD),LM-norm smoothing,and TIST-L1 regularization were compared and analyzed through numerical simulations.The inversion method was optimized to process SP mode logging data from the MR Scanner instrument.The results showed that the TIST-regularization and LM-norm smoothing methods were more accurate for the CPMG and DE sequence echo trains of the oil-water and gas-water models.However,the LM-norm smoothing method was less time-consuming,making it more suitable for logging data processing.A case study in well A25 showed that the processing results by the LM-norm smoothing method were consistent with GEOLOG software.This demonstrates that the LM-norm smoothing method is applicable in practical NMR logging processing.展开更多
The atomic inversion dynamics in the mode-mode competing system is studied bymeans of fully quantum theory. A general solution to the Schroedinger equation of this system isobtained. The influence of the relative comp...The atomic inversion dynamics in the mode-mode competing system is studied bymeans of fully quantum theory. A general solution to the Schroedinger equation of this system isobtained. The influence of the relative competing strength between the atom and the two-mode Geld onthe atomic inversion is disccussed. We show that the presence of the mode-mode competition canresult in periodical collapses-revivals of the atomic inversion.展开更多
In this paper, we present the analytical solution for the model that describes the interaction between a three-level atom and two systems of N-two level atoms. The effects of the quantum numbers and the coupling param...In this paper, we present the analytical solution for the model that describes the interaction between a three-level atom and two systems of N-two level atoms. The effects of the quantum numbers and the coupling parameters between spins on the Pancharatnam phase and the atomic inversion, for some special cases of the initial states, are investigated. The comparison between the two effects shows that the analytic results are well consistent.展开更多
To date, a number of two-dimensional （2D） topological insulators （TIs） have been realized in Group 14 elemental honeycomb lattices, but all are inversionsymmetric. Here, based on first-principles calculations, we ...To date, a number of two-dimensional （2D） topological insulators （TIs） have been realized in Group 14 elemental honeycomb lattices, but all are inversionsymmetric. Here, based on first-principles calculations, we predict a new family of 2D inversion-asymmetric TIs with sizeable bulk gaps from 105 meV to 284 meV, in X2-GeSn （X = H, F, Cl, Br, I） monolayers, making them in principle suitable for room-temperature applications. The nontrivial topological characteristics of inverted band orders are identified in pristine X2-GeSn with X = （F, Cl, Br, I）, whereas H2-GeSn undergoes a nontrivial band inversion at 8% lattice expansion. Topologically protected edge states are identified in X2-GeSn with X = （F, Cl, Br, I）, as well as in strained H2-GeSn. More importantly, the edges of these systems, which exhibit single-Dirac-cone characteristics located exactly in the middle of their bulk band gaps, are ideal for dissipationless transport. Thus, Group 14 elemental honeycomb lattices provide a fascinating playground for the manipulation of quantum states.展开更多
One-dimensional nuclear magnetic resonance （1D NMR） logging technology is limited for fluid typing, while two-dimensional nuclear magnetic resonance （2D NMR） logging can provide more parameters including longitudi...One-dimensional nuclear magnetic resonance （1D NMR） logging technology is limited for fluid typing, while two-dimensional nuclear magnetic resonance （2D NMR） logging can provide more parameters including longitudinal relaxation time （71） and transverse relaxation time （T2） relative to fluid types in porous media. Based on the 2D NMR relaxation mechanism in a gradient magnetic field, echo train simulation and 2D NMR inversion are discussed in detail. For 2D NMR inversion, a hybrid inversion method is proposed based on the damping least squares method （LSQR） and an improved truncated singular value decomposition （TSVD） algorithm. A series of spin echoes are first simulated with multiple waiting times （Tws） in a gradient magnetic field for given fluid models and these synthesized echo trains are inverted by the hybrid method. The inversion results are consistent with given models. Moreover, the numerical simulation of various fluid models such as the gas-water, light oil-water, and vicious oil-water models were carried out with different echo spacings （TEs） and Tws by this hybrid method. Finally, the influences of different signal-to-noise ratios （SNRs） on inversion results in various fluid models are studied. The numerical simulations show that the hybrid method and optimized observation parameters are applicable to fluid typing of gas-water and oil-water models.展开更多
Based on the synchronous joint gravity and magnetic inversion of single interface by Pilkington and the need of revealing Cenozoic and crystalline basement thickness in the new round of oil-gas exploration, we propose...Based on the synchronous joint gravity and magnetic inversion of single interface by Pilkington and the need of revealing Cenozoic and crystalline basement thickness in the new round of oil-gas exploration, we propose a joint gravity and magnetic inversion methodfor two-layer models by concentrating on the relationship between the change of thicknessI and position of the middle layer and anomaly and discuss the effects of the key parameters. Model tests and application to field data show the validity of this method.展开更多
A quantum-spin-Hall （QSH） state was achieved experimentally, albeit at a low critical temperature because of the narrow band gap of the bulk material. Two- dimensional topological insulators are critically important...A quantum-spin-Hall （QSH） state was achieved experimentally, albeit at a low critical temperature because of the narrow band gap of the bulk material. Two- dimensional topological insulators are critically important for realizing novel topological applications. Using density functional theory （DFT）, we demonstrated that hydrogenated GaBi bilayers （HGaBi） form a stable topological insulator with a large nontrivial band gap of 0.320 eV, based on the state-of-the-art hybrid functional method, which is implementable for achieving QSH states at room temperature. The nontrivial topological property of the HGaBi lattice can also be confirmed from the appearance of gapless edge states in the nanoribbon structure. Our results provide a versatile platform for hosting nontrivial topological states usable for important nanoelectronic device applications.展开更多
The magnetotelluric sounding method was used to study the active fault in Shenzhen city.Four magnetotelluric profiles with a dense station interval were laid out across the Shenzhen fault zone.The remote reference tec...The magnetotelluric sounding method was used to study the active fault in Shenzhen city.Four magnetotelluric profiles with a dense station interval were laid out across the Shenzhen fault zone.The remote reference technique was used in both data observation and processing to eliminate the electromagnetic noise near the survey sites,and relatively smooth apparent resistivity curves were obtained.TM mode data and two-dimensional inversion method as NLCG were used to obtain the electrical structures underground.According to the surficial geology survey results on regional strata and distribution of magmatic bodies and faults,the electrical structures at depths less than 2000m of each profile were interpreted.Two regional faults,the Henggang-Luohu fault and the Liantang fault,and seven local faults consistent with the electrical boundaries were verified or discovered.The strata in the survey area were then related with the change of resistivity.Electrical horizontal slices of depths less than 5000m indicate that the Henggang-Luohu fault and the Liantang fault bifurcate at the shallow part but tend to merge in the deep part.展开更多
文摘A two-component waterborne polyurethane(2K-WPU) was prepared by mixing water-soluble acrylic resin and hexamethylene diisocyanate biuret, and then diluted for phase inversion with water. Compared with water-soluble acrylic resin, the phase inversion of 2K-WPU occurs at lower water content. It is indicated by TEM that 2K-WPU parti-cles show a core-shell structure, in which HDI biuret is encapsulated by hydrophilic acrylic resin. 2K-WPU emulsion with HDI biuret has larger particle size and narrower distribution index, while for 2K-WPU emulsion with HDI iso-cyanurate, the latex not only has large particle size, but also has two-peak distribution. FTIR shows that the reaction be-tween HDI biuret and acrylic resin can complete in 12h. In addition, studies on effect of composition of acrylic resin on performance of 2K-WPU show that narrowing the polar difference between water-soluble acrylic resin and HDI biuret and improving the miscibility of two components are the key to prepare the transparent and high gloss films with high crosslinking density.
基金supported by the National Natural Science Foundation of China(Grant Nos.42004041,42288201,and 91958209)。
文摘A shallow crustal velocity structure(above 10 km depth) is essential for understanding the crustal structures and deformation and assessing the exploration prospect of natural resources, and also provides priori information for imaging deeper crustal and mantle structure. Passive-source seismic methods are cost-effective and advantageous for regional-scale imaging of shallow crustal structures compared to active-source methods. Among these passive methods, techniques utilizing receiver function waveforms and/or body-wave amplitude ratios have recently gained prominence due to their relatively high spatial resolution. However, in basin regions, reverberations caused by near-surface unconsolidated sedimentary layers often introduce strong non-uniqueness and uncertainty, limiting the applicability of such methods. To address these challenges, we propose a two-step inversion method that uses multi-frequency P-RF waveforms and P-RF horizontal-to-vertical amplitude ratios. Synthetic tests indicate that our two-step inversion method can mitigate the non-uniqueness of the inversion and enhance the stability of the results. Applying this method to teleseismic data from a linear seismic array across the sedimentary basins in Northeast China, we obtain a high-resolution image of the shallow crustal S-wave velocity structure along the array. Our results reveal significant differences between the basins and mountains. The identification of low-velocity anomalies(<2.8 km s^(-1)) at depths less than 1.0 km beneath the Erlian Basin and less than 2.5 km beneath the Songliao Basin suggests the existence of sedimentary layers. Moreover, the high-velocity anomalies(~3.4–3.8 km s^(-1)) occurring at depths greater than 7 km in the Songliao Basin may reflect mafic intrusions emplaced during the Early Cretaceous. Velocity anomaly distribution in our imaging result is consistent with the location of the major faults, uplifts, and sedimentary depressions, as well as active-source seismic results. This application further validates the e
基金sponsored by the National Natural Science Foundation of China(Nos.42174149,41774144)the National Major Projects(No.2016ZX05014-001).
文摘D-T_(2)two-dimensional nuclear magnetic resonance(2D NMR)logging technology can distinguish pore fluid types intuitively,and it is widely used in oil and gas exploration.Many 2D NMR inversion methods(e.g.,truncated singular value decomposition(TSVD),Butler-Reds-Dawson(BRD),LM-norm smoothing,and TIST-L1 regularization methods)have been proposed successively,but most are limited to numerical simulations.This study focused on the applicability of different inversion methods for NMR logging data of various acquisition sequences,from which the optimal inversion method was selected based on the comparative analysis.First,the two-dimensional NMR logging principle was studied.Then,these inversion methods were studied in detail,and the precision and computational efficiency of CPMG and diffusion editing(DE)sequences obtained from oil-water and gas-water models were compared,respectively.The inversion results and calculation time of truncated singular value decomposition(TSVD),Butler-Reds-Dawson(BRD),LM-norm smoothing,and TIST-L1 regularization were compared and analyzed through numerical simulations.The inversion method was optimized to process SP mode logging data from the MR Scanner instrument.The results showed that the TIST-regularization and LM-norm smoothing methods were more accurate for the CPMG and DE sequence echo trains of the oil-water and gas-water models.However,the LM-norm smoothing method was less time-consuming,making it more suitable for logging data processing.A case study in well A25 showed that the processing results by the LM-norm smoothing method were consistent with GEOLOG software.This demonstrates that the LM-norm smoothing method is applicable in practical NMR logging processing.
文摘The atomic inversion dynamics in the mode-mode competing system is studied bymeans of fully quantum theory. A general solution to the Schroedinger equation of this system isobtained. The influence of the relative competing strength between the atom and the two-mode Geld onthe atomic inversion is disccussed. We show that the presence of the mode-mode competition canresult in periodical collapses-revivals of the atomic inversion.
文摘In this paper, we present the analytical solution for the model that describes the interaction between a three-level atom and two systems of N-two level atoms. The effects of the quantum numbers and the coupling parameters between spins on the Pancharatnam phase and the atomic inversion, for some special cases of the initial states, are investigated. The comparison between the two effects shows that the analytic results are well consistent.
文摘To date, a number of two-dimensional （2D） topological insulators （TIs） have been realized in Group 14 elemental honeycomb lattices, but all are inversionsymmetric. Here, based on first-principles calculations, we predict a new family of 2D inversion-asymmetric TIs with sizeable bulk gaps from 105 meV to 284 meV, in X2-GeSn （X = H, F, Cl, Br, I） monolayers, making them in principle suitable for room-temperature applications. The nontrivial topological characteristics of inverted band orders are identified in pristine X2-GeSn with X = （F, Cl, Br, I）, whereas H2-GeSn undergoes a nontrivial band inversion at 8% lattice expansion. Topologically protected edge states are identified in X2-GeSn with X = （F, Cl, Br, I）, as well as in strained H2-GeSn. More importantly, the edges of these systems, which exhibit single-Dirac-cone characteristics located exactly in the middle of their bulk band gaps, are ideal for dissipationless transport. Thus, Group 14 elemental honeycomb lattices provide a fascinating playground for the manipulation of quantum states.
基金sponsored by the National Natural Science Foundation of China(41172130)the Fundamental Research Funds for the Central Universities(2-9-2012-48)+1 种基金the National Major Projects(No.2011ZX05014-001)CNPC Innovation Foundation(No.2011D-5006-0305)
文摘One-dimensional nuclear magnetic resonance （1D NMR） logging technology is limited for fluid typing, while two-dimensional nuclear magnetic resonance （2D NMR） logging can provide more parameters including longitudinal relaxation time （71） and transverse relaxation time （T2） relative to fluid types in porous media. Based on the 2D NMR relaxation mechanism in a gradient magnetic field, echo train simulation and 2D NMR inversion are discussed in detail. For 2D NMR inversion, a hybrid inversion method is proposed based on the damping least squares method （LSQR） and an improved truncated singular value decomposition （TSVD） algorithm. A series of spin echoes are first simulated with multiple waiting times （Tws） in a gradient magnetic field for given fluid models and these synthesized echo trains are inverted by the hybrid method. The inversion results are consistent with given models. Moreover, the numerical simulation of various fluid models such as the gas-water, light oil-water, and vicious oil-water models were carried out with different echo spacings （TEs） and Tws by this hybrid method. Finally, the influences of different signal-to-noise ratios （SNRs） on inversion results in various fluid models are studied. The numerical simulations show that the hybrid method and optimized observation parameters are applicable to fluid typing of gas-water and oil-water models.
基金Supported by the National Natural Science Foundation of China(Grant No.40674063)National Hi-tech Research and Development Program of China(863Program)(Grant No.2006AA09Z311)
文摘Based on the synchronous joint gravity and magnetic inversion of single interface by Pilkington and the need of revealing Cenozoic and crystalline basement thickness in the new round of oil-gas exploration, we propose a joint gravity and magnetic inversion methodfor two-layer models by concentrating on the relationship between the change of thicknessI and position of the middle layer and anomaly and discuss the effects of the key parameters. Model tests and application to field data show the validity of this method.
文摘A quantum-spin-Hall （QSH） state was achieved experimentally, albeit at a low critical temperature because of the narrow band gap of the bulk material. Two- dimensional topological insulators are critically important for realizing novel topological applications. Using density functional theory （DFT）, we demonstrated that hydrogenated GaBi bilayers （HGaBi） form a stable topological insulator with a large nontrivial band gap of 0.320 eV, based on the state-of-the-art hybrid functional method, which is implementable for achieving QSH states at room temperature. The nontrivial topological property of the HGaBi lattice can also be confirmed from the appearance of gapless edge states in the nanoribbon structure. Our results provide a versatile platform for hosting nontrivial topological states usable for important nanoelectronic device applications.
基金sponsored by the "Program for Active Fault Detection and Earthquake Risk Assessment in Shenzhen City",China
文摘The magnetotelluric sounding method was used to study the active fault in Shenzhen city.Four magnetotelluric profiles with a dense station interval were laid out across the Shenzhen fault zone.The remote reference technique was used in both data observation and processing to eliminate the electromagnetic noise near the survey sites,and relatively smooth apparent resistivity curves were obtained.TM mode data and two-dimensional inversion method as NLCG were used to obtain the electrical structures underground.According to the surficial geology survey results on regional strata and distribution of magmatic bodies and faults,the electrical structures at depths less than 2000m of each profile were interpreted.Two regional faults,the Henggang-Luohu fault and the Liantang fault,and seven local faults consistent with the electrical boundaries were verified or discovered.The strata in the survey area were then related with the change of resistivity.Electrical horizontal slices of depths less than 5000m indicate that the Henggang-Luohu fault and the Liantang fault bifurcate at the shallow part but tend to merge in the deep part.
