Turnouts are in close proximity to each other in the stations of high-speed railway.The stress and deformation of those turnouts which are laid nearby are influenced mutually and therefore those turnouts should be con...Turnouts are in close proximity to each other in the stations of high-speed railway.The stress and deformation of those turnouts which are laid nearby are influenced mutually and therefore those turnouts should be considered together.On the basis of finite element method,according to No.18 jointless turnout with swing nose frog in the ballasted track of high-speed railway,a finite element calculating model of jointless turnout group coupling the longitudinal,lateral and vertical directions is established.The influencing factors,for instance the number of turnouts,connection form,length of intermediate straight line and ballast bed longitudinal resistance,on the mechanical characteristics of turnout,transverse deformation of switch rail and range of rail temperature for laying turnout are analyzed in this paper.The results show that more turnouts result in more obvious interaction between them when the lengths of intermediate straight line are the same;more significant influence between the turnouts with the connection form of head-to-head is produced compared to that of head-to-end;from the perspective of statics,influence between turnouts could be ignored basically if the intermediate straight line is over 50 m;bigger longitudinal resistance of ballast bed leads to less influence between the turnouts.展开更多
By building the finite element model, the track parameters, including the ultimate longitudinal resistance, the length of the intermediate straight line, and the gap between spacer blocks, were analyzed for their infl...By building the finite element model, the track parameters, including the ultimate longitudinal resistance, the length of the intermediate straight line, and the gap between spacer blocks, were analyzed for their influences on the longitudinal forces and displacements of the single turnout and turnout group, respectively. The results indicate that when the longitudinal resistance drops from 32 to 20 N/cm, the maximum additional longitudinal force of the turnout group increases by 19. 2%, and the maximum additional longitudinal displacement of the turnout group grows by 85.3% compared with 50.4% for the single turnout. When the length of intermediate straight line rises from 0 m to infinite, the maximum additional longitudinal force decreases by 38.8%, and the maximum additional longitudinal displacement by 80.3%.展开更多
基金supported by the National Natural Science Foundation-High Speed Railway Joint Fund of China (Grant No. U1234211)the National Natural Science Foundation of China (Grant No. 51108025)the Ministry of Railways Science and Technology Research Development Major Project of China (Grant Nos. 2010G018-D-2 and2011G014-D)
文摘Turnouts are in close proximity to each other in the stations of high-speed railway.The stress and deformation of those turnouts which are laid nearby are influenced mutually and therefore those turnouts should be considered together.On the basis of finite element method,according to No.18 jointless turnout with swing nose frog in the ballasted track of high-speed railway,a finite element calculating model of jointless turnout group coupling the longitudinal,lateral and vertical directions is established.The influencing factors,for instance the number of turnouts,connection form,length of intermediate straight line and ballast bed longitudinal resistance,on the mechanical characteristics of turnout,transverse deformation of switch rail and range of rail temperature for laying turnout are analyzed in this paper.The results show that more turnouts result in more obvious interaction between them when the lengths of intermediate straight line are the same;more significant influence between the turnouts with the connection form of head-to-head is produced compared to that of head-to-end;from the perspective of statics,influence between turnouts could be ignored basically if the intermediate straight line is over 50 m;bigger longitudinal resistance of ballast bed leads to less influence between the turnouts.
基金The Doctoral Fund of Ministry of Educa-tionof China (No. 20050613007)
文摘By building the finite element model, the track parameters, including the ultimate longitudinal resistance, the length of the intermediate straight line, and the gap between spacer blocks, were analyzed for their influences on the longitudinal forces and displacements of the single turnout and turnout group, respectively. The results indicate that when the longitudinal resistance drops from 32 to 20 N/cm, the maximum additional longitudinal force of the turnout group increases by 19. 2%, and the maximum additional longitudinal displacement of the turnout group grows by 85.3% compared with 50.4% for the single turnout. When the length of intermediate straight line rises from 0 m to infinite, the maximum additional longitudinal force decreases by 38.8%, and the maximum additional longitudinal displacement by 80.3%.
