With the two sublattices model, equilibrium compositions of ferrite (α) and austenite (γ) phases, as well as the volume percent of austenite (γ) in different TRIP steels are calculated. Concentration profiles of ca...With the two sublattices model, equilibrium compositions of ferrite (α) and austenite (γ) phases, as well as the volume percent of austenite (γ) in different TRIP steels are calculated. Concentration profiles of carbon, manganese, aluminum and silicon in these steels are also estimated under the lattice fixed frame of reference so as to identify if the equilibrium state is obtained. Through the comparison between the profiles after different time diffusion, the distribution of elements in phases is exhibited and the complex effect due to the mutual interaction of the elements on diffusion is discussed.展开更多
This paper computes the values of commodities(including fixed capital) as well as production prices in China's economy. In light of Marx's transformation problem, the ratios of production prices to the values ...This paper computes the values of commodities(including fixed capital) as well as production prices in China's economy. In light of Marx's transformation problem, the ratios of production prices to the values of 24 major commodities are computed. It is shown that the ratio of price to value in agriculture is the lowest, which indicates that agriculture is facing an unequal exchange of labor with other sectors.展开更多
Some mathematical aspects of the Lie groups SU (2) and in realization by two pairs of boson annihilation and creation operators and in the parametrization by the vector parameter instead of the Euler angles and ...Some mathematical aspects of the Lie groups SU (2) and in realization by two pairs of boson annihilation and creation operators and in the parametrization by the vector parameter instead of the Euler angles and the vector parameter c of Fyodorov are developed. The one-dimensional root scheme of SU (2) is embedded in two-dimensional root schemes of some higher Lie groups, in particular, in inhomogeneous Lie groups and is represented in text and figures. The two-dimensional fundamental representation of SU (2) is calculated and from it the composition law for the product of two transformations and the most important decompositions of general transformations in special ones are derived. Then the transition from representation of SU (2) to of is made where in addition to the parametrization by vector the convenient parametrization by vector c is considered and the connections are established. The measures for invariant integration are derived for and for SU (2) . The relations between 3D-rotations of a unit sphere to fractional linear transformations of a plane by stereographic projection are discussed. All derivations and representations are tried to make in coordinate-invariant way.展开更多
Even though a lot of research has been carried out concerning the preparation of carbonate apatite (CHA), they were related to CHA in the form of powder. In the present study, macroporous CHA bone substitutes were pre...Even though a lot of research has been carried out concerning the preparation of carbonate apatite (CHA), they were related to CHA in the form of powder. In the present study, macroporous CHA bone substitutes were prepared through composition-transformation of gypsum and Ca-hydroxide. Here, we investigated the effect of added Ca-hydroxide to gypsum, carbonation periods, and hydrothermal temperatures for phosphatization to understand the basic principle of composition-transformation of gypsum added Ca-hydroxide to fabricate CHA bone substitutes. The specimens were characterized in terms of chemical and physical properties, such as extent of transformation of macroporous gypsum added Ca-hydroxide into CHA body, type and content of carbonate, and crystal morphology. It was observed that the transformation was faster with higher hydrothermal temperature. However, higher hydrothermal temperature caused de-carbonation phenomena which resulted in the lack of carbonate ions of the product. Moreover, the higher the percentage of Ca-hydroxide added to gypsum, caused the complete transformation of gypsum into CHA to be slower. These findings have been applied to the standard fabrication procedure of carbonate apatite, which in turn will allow scaling up process, and will be provided for biomedical purposes for the Indonesian community.展开更多
With the requirement for complex Web Services steadily increasing, there is a growing interest for reusing basic, existing Web Services to composite new ones. We present a composite Web Services development approach d...With the requirement for complex Web Services steadily increasing, there is a growing interest for reusing basic, existing Web Services to composite new ones. We present a composite Web Services development approach driven by model driven architecture （MDA） ,using UML（Unified Modeling Language） class diagram to model structure HM （Plateform Independent Platform） and UML activity diagram to model behavior PIM, then by model transformation converting the PIMs to specific Web Services specification platforms and execution platform to get the corresponding PSMs （platform specific models）. The main contributions of this paper are the all-around solution to Web Services composition development and the transformation rules for structure and behavior model of Web Services between PIMs and PSMs.展开更多
A series of Ni-Fe-Ga alloys near the prototype Heusler composition （X2YZ） were prepared through arc-melting suction-casting method. The dependences of the transformation behavior on the alloy composition and anneali...A series of Ni-Fe-Ga alloys near the prototype Heusler composition （X2YZ） were prepared through arc-melting suction-casting method. The dependences of the transformation behavior on the alloy composition and annealing treatment were studied in detail by an optical microscope, X-ray diffraction, and differential scanning calorimeters methods. The experimental results show that the martensitic transformation temperatures increase almost linearly with increasing Ni content in all the NiFeGa alloys. Annealing the Ni55.5Fe18Ga26.5 alloy at 100-500 ℃ for 3 h and at 300 ℃ for 1-10 h shifts the martensitic transformation start temperature by almost 20 ℃ to high temperature. The variations in the martensitic transformation temperatures in these alloys are discussed in terms of structural differences resulting from alloy composition and annealing treatment.展开更多
文摘With the two sublattices model, equilibrium compositions of ferrite (α) and austenite (γ) phases, as well as the volume percent of austenite (γ) in different TRIP steels are calculated. Concentration profiles of carbon, manganese, aluminum and silicon in these steels are also estimated under the lattice fixed frame of reference so as to identify if the equilibrium state is obtained. Through the comparison between the profiles after different time diffusion, the distribution of elements in phases is exhibited and the complex effect due to the mutual interaction of the elements on diffusion is discussed.
文摘This paper computes the values of commodities(including fixed capital) as well as production prices in China's economy. In light of Marx's transformation problem, the ratios of production prices to the values of 24 major commodities are computed. It is shown that the ratio of price to value in agriculture is the lowest, which indicates that agriculture is facing an unequal exchange of labor with other sectors.
文摘Some mathematical aspects of the Lie groups SU (2) and in realization by two pairs of boson annihilation and creation operators and in the parametrization by the vector parameter instead of the Euler angles and the vector parameter c of Fyodorov are developed. The one-dimensional root scheme of SU (2) is embedded in two-dimensional root schemes of some higher Lie groups, in particular, in inhomogeneous Lie groups and is represented in text and figures. The two-dimensional fundamental representation of SU (2) is calculated and from it the composition law for the product of two transformations and the most important decompositions of general transformations in special ones are derived. Then the transition from representation of SU (2) to of is made where in addition to the parametrization by vector the convenient parametrization by vector c is considered and the connections are established. The measures for invariant integration are derived for and for SU (2) . The relations between 3D-rotations of a unit sphere to fractional linear transformations of a plane by stereographic projection are discussed. All derivations and representations are tried to make in coordinate-invariant way.
文摘Even though a lot of research has been carried out concerning the preparation of carbonate apatite (CHA), they were related to CHA in the form of powder. In the present study, macroporous CHA bone substitutes were prepared through composition-transformation of gypsum and Ca-hydroxide. Here, we investigated the effect of added Ca-hydroxide to gypsum, carbonation periods, and hydrothermal temperatures for phosphatization to understand the basic principle of composition-transformation of gypsum added Ca-hydroxide to fabricate CHA bone substitutes. The specimens were characterized in terms of chemical and physical properties, such as extent of transformation of macroporous gypsum added Ca-hydroxide into CHA body, type and content of carbonate, and crystal morphology. It was observed that the transformation was faster with higher hydrothermal temperature. However, higher hydrothermal temperature caused de-carbonation phenomena which resulted in the lack of carbonate ions of the product. Moreover, the higher the percentage of Ca-hydroxide added to gypsum, caused the complete transformation of gypsum into CHA to be slower. These findings have been applied to the standard fabrication procedure of carbonate apatite, which in turn will allow scaling up process, and will be provided for biomedical purposes for the Indonesian community.
基金Supported by the National 863 High Technology Development of China(2003AA001023)
文摘With the requirement for complex Web Services steadily increasing, there is a growing interest for reusing basic, existing Web Services to composite new ones. We present a composite Web Services development approach driven by model driven architecture （MDA） ,using UML（Unified Modeling Language） class diagram to model structure HM （Plateform Independent Platform） and UML activity diagram to model behavior PIM, then by model transformation converting the PIMs to specific Web Services specification platforms and execution platform to get the corresponding PSMs （platform specific models）. The main contributions of this paper are the all-around solution to Web Services composition development and the transformation rules for structure and behavior model of Web Services between PIMs and PSMs.
基金Funded by the Foundation for Department of Science and Technology of Jiangxi Province (No.ZDG03800)the Foundation for Department of Education of Jiangxi Province(No.GJJ11579)
文摘A series of Ni-Fe-Ga alloys near the prototype Heusler composition （X2YZ） were prepared through arc-melting suction-casting method. The dependences of the transformation behavior on the alloy composition and annealing treatment were studied in detail by an optical microscope, X-ray diffraction, and differential scanning calorimeters methods. The experimental results show that the martensitic transformation temperatures increase almost linearly with increasing Ni content in all the NiFeGa alloys. Annealing the Ni55.5Fe18Ga26.5 alloy at 100-500 ℃ for 3 h and at 300 ℃ for 1-10 h shifts the martensitic transformation start temperature by almost 20 ℃ to high temperature. The variations in the martensitic transformation temperatures in these alloys are discussed in terms of structural differences resulting from alloy composition and annealing treatment.
