Considering the CRTS-II track slab,which is commonly used in the Chinese high-speed railway system,a vehicle-track-bridge dynamic analysis method is proposed in which the vehicle subsystem equations are established by...Considering the CRTS-II track slab,which is commonly used in the Chinese high-speed railway system,a vehicle-track-bridge dynamic analysis method is proposed in which the vehicle subsystem equations are established by the rigid body dynamics method,the track subsystem and the bridge subsystem equations are established by the FEM,the wheel-rail contact relation is defined by the corresponding assumption in vertical direction and the Kalker linear creep theory in lateral direction.The in-span spring element is derived to model the track-bridge interaction;the equal-band-width storage is adopted to fit the track structure with multilayer uniform section beam;and the dynamic equilibrium equations are solved by the inter-history iteration method.As a case study,the response of a CRH2 high-speed train transverses a simply-supported bridge with successive 31.5m double bound pre-stress beams is simulated.The result shows that using the vehicle-track-bridge interaction model instead of the vehicle-bridge interaction model helps predict the rotation angle at beam ends and choose an economic beam vertical stiffness.展开更多
The motor and trailer cars of a high-speed train were modeled as a multi-rigid body system with two suspensions. According to structural characteristic of a slab track, a new spatial vibration model of track segment e...The motor and trailer cars of a high-speed train were modeled as a multi-rigid body system with two suspensions. According to structural characteristic of a slab track, a new spatial vibration model of track segment element of the slab track was put forward. The spatial vibration equation set of the high-speed train and slab track system was then established on the basis of the principle of total potential energy with stationary value in elastic system dynamics and the rule of ＂set-in-right-position＂ for formulating system matrices. The equation set was solved by the Wilson-θ direct integration method. The contents mentioned above constitute the analysis theory of spatial vibration of high-speed train and slab track system. The theory was then verified by the high-speed running experiment carried out on the slab track in the Qinghuangdao-Shenyang passenger transport line. The results show that the calculated results agree well with the measured rcsults, such as the calculated lateral and vertical rail displacements are 0.82 mm and 0.9 mm and the measured ones 0.75 mm and 0.93 mm, respectively; the calculated lateral and vertical wheel-rail forces are 8.9 kN and 102.3 kN and the measured ones 8.6 kN and 80.2 kN, respectively. The interpolation method, that is, the lateral finite strip and slab segment element, for slab deformation proposed is of simplification and applicability compared with the traditional plate element method. All of these demonstrate the reliability of the theory proposed.展开更多
China railways track structure II (CRTS II) slab ballastless track on bridge is one kind of track structures unique to China. Its main bearing component of longitudinal force is the continuous base plate rather than ...China railways track structure II (CRTS II) slab ballastless track on bridge is one kind of track structures unique to China. Its main bearing component of longitudinal force is the continuous base plate rather than rail. And the track-bridge interaction is weakened by the sliding layer installed between base plate and bridge deck. In order to study the dynamic response of CRTS II slab ballastless track on bridge under seismic action, a 3D nonlinear dynamic model for simply-supported bridges and CRTS II track was established, which considered structures such as steel rail, fasteners, track plate, mortar layer, base plate, sliding layer, bridge, consolidation, anchors, stoppers, etc. Then its force and deformation features under different intensities of seismic excitation were studied. As revealed, the seismic response of the system increases with the increase of seismic intensity. The peak stresses of rail, track plate and base plate all occur at the abutment or anchors. Both track plate and base plate are about to crack. Besides, the rapid relative displacement between base plate and bridge deck due to the small friction coefficient of sliding layer is beneficial to improve the seismic performance of the system. During the earthquake, a large vertical displacement appears in base plate which leads to frequent collisions between stoppers and base plate, as a result, stoppers may be damaged.展开更多
Concrete slabs are widely used in modern railways to increase the inherent resilient quality of the tracks,provide safe and smooth rides,and reduce the maintenance frequency.In this paper,the elastic performance of a ...Concrete slabs are widely used in modern railways to increase the inherent resilient quality of the tracks,provide safe and smooth rides,and reduce the maintenance frequency.In this paper,the elastic performance of a novel slab trackform for high-speed railways is investigated using three-dimensional finite element modelling in Abaqus.It is then compared to the performance of a ballasted track.First,slab and ballasted track models are developed to replicate the full-scale testing of track sections.Once the models are calibrated with the experimental results,the novel slab model is developed and compared against the calibrated slab track results.The slab and ballasted track models are then extended to create linear dynamic models,considering the track geodynamics,and simulating train passages at various speeds,for which the Ledsgard documented case was used to validate the models.Trains travelling at low and high speeds are analysed to investigate the track deflections and the wave propagation in the soil,considering the issues associated with critical speeds.Various train loading methods are discussed,and the most practical approach is retained and described.Moreover,correlations are made between the geotechnical parameters of modern high-speed rail and conventional standards.It is found that considering the same ground condition,the slab track deflections are considerably smaller than those of the ballasted track at high speeds,while they show similar behaviour at low speeds.展开更多
The unprecedented rate of metro construction has led to a highly complex network of metro lines.Tunnels are being overlapped to an ever-increasing degree.This paper investigates the deformation response of double-trac...The unprecedented rate of metro construction has led to a highly complex network of metro lines.Tunnels are being overlapped to an ever-increasing degree.This paper investigates the deformation response of double-track overlapped tunnels in Tianjin,China using finite element analysis(FEA)and field monitoring,considering the attributes of different tunneling forms.With respect to the upper tunneling,the results of the FEA and field monitoring showed that the maximum vertical displacements of the ground surface during the tail passage were 2.06 mm,2.25 mm and 2.39 mm obtained by the FEA,field monitoring and Peck calculation,respectively;the heaves on the vertical displacement curve were observed at 8 m(1.25D,where D is the diameter of the tunnel)away from the center of the tunnel and the curve at both sides was asymmetrical.Furthermore,the crown and bottom produce approximately0.38 mm and 1.26 mm of contraction,respectively.The results of the FEA of the upper and lower sections demonstrated that the tunneling form has an obvious influence on the deformation response of the double-track overlapped tunnel.Compared with the upper tunneling,the lower tunneling exerted significantly less influence on the deformation response,which manifested as a smaller displacement of the strata and deformation of the existing tunnel.The results of this study on overlapped tunnels can provide a reference for similar projects in the future.展开更多
基金supported by the National Basic Research Program of China("973"Project)(Grant No.2013CB036203)the National Natural Science Foundation of China(Grant No.U1134206)+1 种基金the 111 project(Grant No.B13002)the Doctoral Fund of Ministry of Education of China(Grant No.20130009110036)
文摘Considering the CRTS-II track slab,which is commonly used in the Chinese high-speed railway system,a vehicle-track-bridge dynamic analysis method is proposed in which the vehicle subsystem equations are established by the rigid body dynamics method,the track subsystem and the bridge subsystem equations are established by the FEM,the wheel-rail contact relation is defined by the corresponding assumption in vertical direction and the Kalker linear creep theory in lateral direction.The in-span spring element is derived to model the track-bridge interaction;the equal-band-width storage is adopted to fit the track structure with multilayer uniform section beam;and the dynamic equilibrium equations are solved by the inter-history iteration method.As a case study,the response of a CRH2 high-speed train transverses a simply-supported bridge with successive 31.5m double bound pre-stress beams is simulated.The result shows that using the vehicle-track-bridge interaction model instead of the vehicle-bridge interaction model helps predict the rotation angle at beam ends and choose an economic beam vertical stiffness.
基金Project(2007CB714706) supported by the National Basic Research Program of ChinaProject (50678176) supported by the National Natural Science Foundation of ChinaProject(NCET-07-0866) supported by the Program for New Century Excellent Talents in University
文摘The motor and trailer cars of a high-speed train were modeled as a multi-rigid body system with two suspensions. According to structural characteristic of a slab track, a new spatial vibration model of track segment element of the slab track was put forward. The spatial vibration equation set of the high-speed train and slab track system was then established on the basis of the principle of total potential energy with stationary value in elastic system dynamics and the rule of ＂set-in-right-position＂ for formulating system matrices. The equation set was solved by the Wilson-θ direct integration method. The contents mentioned above constitute the analysis theory of spatial vibration of high-speed train and slab track system. The theory was then verified by the high-speed running experiment carried out on the slab track in the Qinghuangdao-Shenyang passenger transport line. The results show that the calculated results agree well with the measured rcsults, such as the calculated lateral and vertical rail displacements are 0.82 mm and 0.9 mm and the measured ones 0.75 mm and 0.93 mm, respectively; the calculated lateral and vertical wheel-rail forces are 8.9 kN and 102.3 kN and the measured ones 8.6 kN and 80.2 kN, respectively. The interpolation method, that is, the lateral finite strip and slab segment element, for slab deformation proposed is of simplification and applicability compared with the traditional plate element method. All of these demonstrate the reliability of the theory proposed.
基金supported by the National Natural Science Foundation of China (Grant No. 51608542)Project of Science and Technology Research and Development Program of China Railway Corporation (Grant No.2015G001-G)
文摘China railways track structure II (CRTS II) slab ballastless track on bridge is one kind of track structures unique to China. Its main bearing component of longitudinal force is the continuous base plate rather than rail. And the track-bridge interaction is weakened by the sliding layer installed between base plate and bridge deck. In order to study the dynamic response of CRTS II slab ballastless track on bridge under seismic action, a 3D nonlinear dynamic model for simply-supported bridges and CRTS II track was established, which considered structures such as steel rail, fasteners, track plate, mortar layer, base plate, sliding layer, bridge, consolidation, anchors, stoppers, etc. Then its force and deformation features under different intensities of seismic excitation were studied. As revealed, the seismic response of the system increases with the increase of seismic intensity. The peak stresses of rail, track plate and base plate all occur at the abutment or anchors. Both track plate and base plate are about to crack. Besides, the rapid relative displacement between base plate and bridge deck due to the small friction coefficient of sliding layer is beneficial to improve the seismic performance of the system. During the earthquake, a large vertical displacement appears in base plate which leads to frequent collisions between stoppers and base plate, as a result, stoppers may be damaged.
基金Engineering and Physical Sciences Research Council (EPSRC) is also acknowledged for funding this work under Grant Number EP/N009207/1.
文摘Concrete slabs are widely used in modern railways to increase the inherent resilient quality of the tracks,provide safe and smooth rides,and reduce the maintenance frequency.In this paper,the elastic performance of a novel slab trackform for high-speed railways is investigated using three-dimensional finite element modelling in Abaqus.It is then compared to the performance of a ballasted track.First,slab and ballasted track models are developed to replicate the full-scale testing of track sections.Once the models are calibrated with the experimental results,the novel slab model is developed and compared against the calibrated slab track results.The slab and ballasted track models are then extended to create linear dynamic models,considering the track geodynamics,and simulating train passages at various speeds,for which the Ledsgard documented case was used to validate the models.Trains travelling at low and high speeds are analysed to investigate the track deflections and the wave propagation in the soil,considering the issues associated with critical speeds.Various train loading methods are discussed,and the most practical approach is retained and described.Moreover,correlations are made between the geotechnical parameters of modern high-speed rail and conventional standards.It is found that considering the same ground condition,the slab track deflections are considerably smaller than those of the ballasted track at high speeds,while they show similar behaviour at low speeds.
基金financially supported by the Open Project of the State Key Laboratory of Disaster Reduction in Civil Engineering(Grant No.SLDRCE17-01)the National Key Research and Development Program of China(Grant No.2017YFC0805402)the National Natural Science Foundation of China(Grant No.51808387)。
文摘The unprecedented rate of metro construction has led to a highly complex network of metro lines.Tunnels are being overlapped to an ever-increasing degree.This paper investigates the deformation response of double-track overlapped tunnels in Tianjin,China using finite element analysis(FEA)and field monitoring,considering the attributes of different tunneling forms.With respect to the upper tunneling,the results of the FEA and field monitoring showed that the maximum vertical displacements of the ground surface during the tail passage were 2.06 mm,2.25 mm and 2.39 mm obtained by the FEA,field monitoring and Peck calculation,respectively;the heaves on the vertical displacement curve were observed at 8 m(1.25D,where D is the diameter of the tunnel)away from the center of the tunnel and the curve at both sides was asymmetrical.Furthermore,the crown and bottom produce approximately0.38 mm and 1.26 mm of contraction,respectively.The results of the FEA of the upper and lower sections demonstrated that the tunneling form has an obvious influence on the deformation response of the double-track overlapped tunnel.Compared with the upper tunneling,the lower tunneling exerted significantly less influence on the deformation response,which manifested as a smaller displacement of the strata and deformation of the existing tunnel.The results of this study on overlapped tunnels can provide a reference for similar projects in the future.
