Promoting the development of concentrating solar power(CSP)is critical to achieve carbon peaking and carbon neutrality.Molten salt tanks are important thermal energy storage components in CSP systems.In this study,the...Promoting the development of concentrating solar power(CSP)is critical to achieve carbon peaking and carbon neutrality.Molten salt tanks are important thermal energy storage components in CSP systems.In this study,the cold and hot tanks of a 100 MW CSP plant in China were used as modeling prototypes.The materials and geometric models were determined based on related specifications and engineering experience.Mechanical characteristics of the tanks under steady condition,including the deformation,stress distribution,and stress concentration,were simulated and calculated.Furthermore,the strength of the tank walls was evaluated.The findings can be used as a reference for designing the molten salt storage tank and reducing the risk during the operation.展开更多
Ocean thermal energy conversion(OTEC)is a process of generating electricity by exploiting the temperature difference between warm surface seawater and cold deep seawater.Due to the high static and dynamic pressures th...Ocean thermal energy conversion(OTEC)is a process of generating electricity by exploiting the temperature difference between warm surface seawater and cold deep seawater.Due to the high static and dynamic pressures that are caused by seawater circulation,the stiffened panel that constitutes a seawater tank may undergo a reduction in ultimate strength.The current paper investigates the design of stiffening systems for OTEC seawater tanks by examining the effects of stiffening parameters such as stiffener sizes and span-over-bay ratio for the applied combined loadings of lateral and transverse pressure by fluid motion and axial compression due to global bending moment.The ultimate strength calculation was conducted by using the non-linear finite element method via the commercial software known as ABAQUS.The stress and deformation distribution due to pressure loads was computed in the first step and then brought to the second step,in which the axial compression was applied.The effects of pressure on the ultimate strength of the stiffener were investigated for representative stiffened panels,and the significance of the stiffener parameters was assessed by using the sensitivity analysis method.As a result,the ultimate strength was reduced by approximately 1.5%for the span-over-bay ratio of 3 and by 7%for the span-over-bay ratio of 6.展开更多
This paper describes a mathematical model developed to study the behavior of liquefied petroleum gas (LPG) tanks when subjected to jet fire. The model consists of a number of field and zone sub-models which are used t...This paper describes a mathematical model developed to study the behavior of liquefied petroleum gas (LPG) tanks when subjected to jet fire. The model consists of a number of field and zone sub-models which are used to simulate the various physical phenomena taking place during the tank engulfment period. The model can be used to predict the pressure and temperature of the LPG in the tank, the temperature of the wall of tank, and the time of tank explosion. The comparisons between the model predicted results and the test data show good agreement. The results show that the jet fire partially impinging on tank wall led to higher wall temperature and the time to failure was shorter than that in engulfing pool fire. And the exposure of the upper wall in the vapor zone to the fire is more dangerous than that of the LPG contacted wall.展开更多
Gas with high pressure is widely used at present as fuel storage mode for different hydrogen vehicles. Differenttypes of materials are used for constructing these hydrogen pressure vessels. An aluminum lined vessel an...Gas with high pressure is widely used at present as fuel storage mode for different hydrogen vehicles. Differenttypes of materials are used for constructing these hydrogen pressure vessels. An aluminum lined vessel and typicallycarbon fiber reinforced plastic (CFRP) materials are commercially used in hydrogen vessels. An aluminumlined vessel is easy to construct and posses high thermal conductivity compared to other commercially availablevessels. However, compared to CFRP lined vessel, it has low strength capacity and safety factors. Therefore,nowadays, CFRP lined vessels are becoming more popular in hydrogen vehicles. Moreover, CFRP lined vesselhas an advantage of light weight. CFRP, although, has many desirable properties in reducing the weight and inincreasing the strength, it is also necessary to keep the material temperature below 85 ℃ for maintaining stringentsafety requirements. While filling process occurs, the temperature can be exceeded due to the compression worksof the gas flow. Therefore, it is very important to optimize the hydrogen filling system to avoid the crossing of thecritical limit of the temperature rise. Computer-aided simulation has been conducted to characterize the hydrogenfilling to optimize the technique. Three types of hydrogen vessels with different volumes have been analyzed foroptimizing the charging characteristics of hydrogen to test vessels. Gas temperatures are measured inside representativevessels in the supply reservoirs (H2 storages) and at the inlet to the test tank during filling.展开更多
-The temperature distributions obtained by different methods of analysis for solving thermal transfer of reinforced concrete (R. C.) submarine oil tanks (RCSOT), including flat wall method, cylinder wall method and fi...-The temperature distributions obtained by different methods of analysis for solving thermal transfer of reinforced concrete (R. C.) submarine oil tanks (RCSOT), including flat wall method, cylinder wall method and finite element method, are compared with the experimental data of thermal transfer of RCSOT. The precision and scope of applicability of different methods are discussed. The principle for selecting analysis method for solving thermal transfer of RCSOT is given. The analytical and experimental temperature distributions show that the wall of RCSOT should consist of double walls and empty space between them should be filled with sand or other heat insulation materials to reduce the temperature difference of the wall and to prevent concrete from cracking.展开更多
文摘Promoting the development of concentrating solar power(CSP)is critical to achieve carbon peaking and carbon neutrality.Molten salt tanks are important thermal energy storage components in CSP systems.In this study,the cold and hot tanks of a 100 MW CSP plant in China were used as modeling prototypes.The materials and geometric models were determined based on related specifications and engineering experience.Mechanical characteristics of the tanks under steady condition,including the deformation,stress distribution,and stress concentration,were simulated and calculated.Furthermore,the strength of the tank walls was evaluated.The findings can be used as a reference for designing the molten salt storage tank and reducing the risk during the operation.
基金part of the OTEC research activity"Preliminary Design of a 5 MW OTEC plant:Study case in the North Bali"research grand DIPA-124.01.1.690505/2023 conducted by the Marine Renewable Energy Conversion Technology research group,Research Center for Hydrodynamics Technology,National Research and Innovation Agency(BRIN)。
文摘Ocean thermal energy conversion(OTEC)is a process of generating electricity by exploiting the temperature difference between warm surface seawater and cold deep seawater.Due to the high static and dynamic pressures that are caused by seawater circulation,the stiffened panel that constitutes a seawater tank may undergo a reduction in ultimate strength.The current paper investigates the design of stiffening systems for OTEC seawater tanks by examining the effects of stiffening parameters such as stiffener sizes and span-over-bay ratio for the applied combined loadings of lateral and transverse pressure by fluid motion and axial compression due to global bending moment.The ultimate strength calculation was conducted by using the non-linear finite element method via the commercial software known as ABAQUS.The stress and deformation distribution due to pressure loads was computed in the first step and then brought to the second step,in which the axial compression was applied.The effects of pressure on the ultimate strength of the stiffener were investigated for representative stiffened panels,and the significance of the stiffener parameters was assessed by using the sensitivity analysis method.As a result,the ultimate strength was reduced by approximately 1.5%for the span-over-bay ratio of 3 and by 7%for the span-over-bay ratio of 6.
文摘This paper describes a mathematical model developed to study the behavior of liquefied petroleum gas (LPG) tanks when subjected to jet fire. The model consists of a number of field and zone sub-models which are used to simulate the various physical phenomena taking place during the tank engulfment period. The model can be used to predict the pressure and temperature of the LPG in the tank, the temperature of the wall of tank, and the time of tank explosion. The comparisons between the model predicted results and the test data show good agreement. The results show that the jet fire partially impinging on tank wall led to higher wall temperature and the time to failure was shorter than that in engulfing pool fire. And the exposure of the upper wall in the vapor zone to the fire is more dangerous than that of the LPG contacted wall.
文摘Gas with high pressure is widely used at present as fuel storage mode for different hydrogen vehicles. Differenttypes of materials are used for constructing these hydrogen pressure vessels. An aluminum lined vessel and typicallycarbon fiber reinforced plastic (CFRP) materials are commercially used in hydrogen vessels. An aluminumlined vessel is easy to construct and posses high thermal conductivity compared to other commercially availablevessels. However, compared to CFRP lined vessel, it has low strength capacity and safety factors. Therefore,nowadays, CFRP lined vessels are becoming more popular in hydrogen vehicles. Moreover, CFRP lined vesselhas an advantage of light weight. CFRP, although, has many desirable properties in reducing the weight and inincreasing the strength, it is also necessary to keep the material temperature below 85 ℃ for maintaining stringentsafety requirements. While filling process occurs, the temperature can be exceeded due to the compression worksof the gas flow. Therefore, it is very important to optimize the hydrogen filling system to avoid the crossing of thecritical limit of the temperature rise. Computer-aided simulation has been conducted to characterize the hydrogenfilling to optimize the technique. Three types of hydrogen vessels with different volumes have been analyzed foroptimizing the charging characteristics of hydrogen to test vessels. Gas temperatures are measured inside representativevessels in the supply reservoirs (H2 storages) and at the inlet to the test tank during filling.
文摘-The temperature distributions obtained by different methods of analysis for solving thermal transfer of reinforced concrete (R. C.) submarine oil tanks (RCSOT), including flat wall method, cylinder wall method and finite element method, are compared with the experimental data of thermal transfer of RCSOT. The precision and scope of applicability of different methods are discussed. The principle for selecting analysis method for solving thermal transfer of RCSOT is given. The analytical and experimental temperature distributions show that the wall of RCSOT should consist of double walls and empty space between them should be filled with sand or other heat insulation materials to reduce the temperature difference of the wall and to prevent concrete from cracking.
