The ^239Pu fission chambers are widely used to measure fission spectrum neutron flux due to a fiat response to fast neutrons. However, in the meantime the resonance and thermal neutrons can cause a significant influen...The ^239Pu fission chambers are widely used to measure fission spectrum neutron flux due to a fiat response to fast neutrons. However, in the meantime the resonance and thermal neutrons can cause a significant influence on the measurement if they are moderated, which could be eliminated by using ^10B and Cd covers. At a column enriched uranium fast neutron critical assembly, the fission reaction rates of ^239gpu are measured as 1.791 × 10^-16 2.350 × 10^-16 and 1.385×10^-15 per second for 15 mm thick ^10B cover, 0.5 mm thick Cd cover, and no cover respectively, while the fission reaction rate of 239pu is rapidly increased to 2.569×10^-14 for a 20 mm thick polythene covering fission chamber. The average 239pu fission cross-section of thermal and resonance neutrons is calculated to be 500 b and 24.95 b with the assumption of 1/v and 1/E spectra respectively, then thermal, resonance and fast neutron flux are achieved to be 2.30×10^6, 2.24×10^6 and 1.04×10^8 cm^-2·s^-1.展开更多
Neutron activation analysis technique of the Gd2O2S:М scintillation ceramics was developed. The concentrations of 15 trace, minor and major elements (As, Ce, Co, Cr, Cs, Eu, Fe, La, Sc, Tb, Zn, Zr, Pr, Gd, Na) have b...Neutron activation analysis technique of the Gd2O2S:М scintillation ceramics was developed. The concentrations of 15 trace, minor and major elements (As, Ce, Co, Cr, Cs, Eu, Fe, La, Sc, Tb, Zn, Zr, Pr, Gd, Na) have been measured with the instrumental neutron activation analysis of the Gd2O2S:Pr sample. The concentrations range of the determined elements is from 3 × 10-8 to 2.0% in mass. The determination limit of the elements was calculated to be (0.6 - 1.3 × 10-8% in mass).展开更多
The fast and maximum thermal neutron fluxes from the DD-109 neutron generator at the University of Sharjah were experimentally measured by the activation technique using different neutron reactions. The thermal and fa...The fast and maximum thermal neutron fluxes from the DD-109 neutron generator at the University of Sharjah were experimentally measured by the activation technique using different neutron reactions. The thermal and fast neutron fluxes were found to be 2.960 × 10~6 and6.186 × 10~7 n/cm^2 s, respectively. This was done to verify the modeling results for the optimum moderator thickness needed to maximize the thermal neutron flux. The optimum moderator thickness was found to be between 3.5 and4 cm. The present data were compared with the detailed MCNP model-based calculation performed in earlier work to simulate the generator.展开更多
基金Supported by National Natural Science Foundation of China(91326109)
文摘The ^239Pu fission chambers are widely used to measure fission spectrum neutron flux due to a fiat response to fast neutrons. However, in the meantime the resonance and thermal neutrons can cause a significant influence on the measurement if they are moderated, which could be eliminated by using ^10B and Cd covers. At a column enriched uranium fast neutron critical assembly, the fission reaction rates of ^239gpu are measured as 1.791 × 10^-16 2.350 × 10^-16 and 1.385×10^-15 per second for 15 mm thick ^10B cover, 0.5 mm thick Cd cover, and no cover respectively, while the fission reaction rate of 239pu is rapidly increased to 2.569×10^-14 for a 20 mm thick polythene covering fission chamber. The average 239pu fission cross-section of thermal and resonance neutrons is calculated to be 500 b and 24.95 b with the assumption of 1/v and 1/E spectra respectively, then thermal, resonance and fast neutron flux are achieved to be 2.30×10^6, 2.24×10^6 and 1.04×10^8 cm^-2·s^-1.
文摘Neutron activation analysis technique of the Gd2O2S:М scintillation ceramics was developed. The concentrations of 15 trace, minor and major elements (As, Ce, Co, Cr, Cs, Eu, Fe, La, Sc, Tb, Zn, Zr, Pr, Gd, Na) have been measured with the instrumental neutron activation analysis of the Gd2O2S:Pr sample. The concentrations range of the determined elements is from 3 × 10-8 to 2.0% in mass. The determination limit of the elements was calculated to be (0.6 - 1.3 × 10-8% in mass).
文摘The fast and maximum thermal neutron fluxes from the DD-109 neutron generator at the University of Sharjah were experimentally measured by the activation technique using different neutron reactions. The thermal and fast neutron fluxes were found to be 2.960 × 10~6 and6.186 × 10~7 n/cm^2 s, respectively. This was done to verify the modeling results for the optimum moderator thickness needed to maximize the thermal neutron flux. The optimum moderator thickness was found to be between 3.5 and4 cm. The present data were compared with the detailed MCNP model-based calculation performed in earlier work to simulate the generator.
