The complexity of the kinematics and dynamics of a manipulator makes it necessary to simplify the modeling process.However,the traditional representations cannot achieve this because of the absence of coordinate invar...The complexity of the kinematics and dynamics of a manipulator makes it necessary to simplify the modeling process.However,the traditional representations cannot achieve this because of the absence of coordinate invariance.Therefore,the coordinate invariant method is an important research issue.First,the rigid-body acceleration,the time derivative of the twist,is proved to be a screw,and its physical meaning is explained.Based on the twist and the rigid-body acceleration,the acceleration of the end-effector is expressed as a linear-bilinear form,and the kinematics Hessian matrix of the manipulator（represented by Lie bracket）is deduced.Further,Newton-Euler＇s equation is rewritten as a linear-bilinear form,from which the dynamics Hessian matrix of a rigid body is obtained.The formulae and the dynamics Hessian matrix are proved to be coordinate invariant.Referring to the principle of virtual work,the dynamics Hessian matrix of the parallel manipulator is gotten and the detailed dynamic model is derived.An index of dynamical coupling based on dynamics Hessian matrix is presented.In the end,a foldable parallel manipulator is taken as an example to validate the deduced kinematics and dynamics formulae.The screw theory based method can simplify the kinematics and dynamics of a manipulator,also the corresponding dynamics Hessian matrix can be used to evaluate the dynamical coupling of a manipulator.展开更多
Because the deployable structures are complex multi-loop structures and methods of derivation which lead to simpler kinematic and dynamic equations of motion are the subject of research effort, the kinematics and dyna...Because the deployable structures are complex multi-loop structures and methods of derivation which lead to simpler kinematic and dynamic equations of motion are the subject of research effort, the kinematics and dynamics of deployable structures with scissor-like-elements are presented based on screw theory and the principle of virtual work respectively. According to the geometric characteristic of the deployable structure examined, the basic structural unit is the common scissor-like-element（SLE）. First, a spatial deployable structure, comprised of three SLEs, is defined, and the constraint topology graph is obtained. The equations of motion are then derived based on screw theory and the geometric nature of scissor elements. Second, to develop the dynamics of the whole deployable structure, the local coordinates of the SLEs and the Jacobian matrices of the center of mass of the deployable structure are derived. Then, the equivalent forces are assembled and added in the equations of motion based on the principle of virtual work. Finally, dynamic behavior and unfolded process of the deployable structure are simulated. Its figures of velocity, acceleration and input torque are obtained based on the simulate results. Screw theory not only provides an efficient solution formulation and theory guidance for complex multi-closed loop deployable structures, but also extends the method to solve dynamics of deployable structures. As an efficient mathematical tool, the simper equations of motion are derived based on screw theory.展开更多
The existence of coupling makes the parallel mechanism possess some special advantages over the serial mechanism, while it is just the coupling that brings about the parallel mechanism some limitations, such as comple...The existence of coupling makes the parallel mechanism possess some special advantages over the serial mechanism, while it is just the coupling that brings about the parallel mechanism some limitations, such as complex workspace, high nonlinear relationship between input and output, difficulties in static and dynamic analysis, and the development of control system, which restricts its application fields. The decoupled parallel mechanism is currently one of the research focuses of the mechanism fields, while the study on the different characteristics between the deeoupled and coupled parallel mechanisms has not been reported. Therefore, this paper performs the systematic comparative analysis of the 3-RPUR and the 3-CPR parallel mechanisms. The features of the two mechanisms are described and their movement forms are analyzed with screw theory. The inverse and forward displacement solutions are solved and the Jacobian matrices are obtained. According to the Jacobian matrices and by using the theory of physical model of the solution space, the workspace, dexterity, velocity, payload capability, and stiffness of the mechanisms are analyzed with plotting the indices atlases. The research results prove that the effects of the coupling on the parallel mechanism are double-side, and then the adoption of the decoupled parallel mechanism should be determined by the requirements of the concrete application situation. The contents of this paper should be useful for the type synthesis and practical application of the parallel mechanism.展开更多
Scissor-like element has a number of applications in deployable structures such as planar deployable structure (PDS) and ring deployable structure(RDS). However, the mobility analysis of the multi-loop deployable stru...Scissor-like element has a number of applications in deployable structures such as planar deployable structure (PDS) and ring deployable structure(RDS). However, the mobility analysis of the multi-loop deployable structures is made more difficulty by the traditional mobility formula, because the deployable structure is a very complex structure with multi-loop. Therefore, On the basis of screw theory, the calculation method of mobility of deployable structures of SLE is thoroughly discussed. In order to investigate the mobility, decomposing and composing structures(DCS) are developed, and the basic units are able to be obtained. On the basis of the deployable structures’ geometrical characteristics, there exists a closed-loop quadrilateral structure and some non-closed-loop quadrilateral structures in PDS. Also, a six legs parallel structure is present in RDS. The basic units’ mobility can be solved by both the methods of screw theory and topology constraint graphs. Then, composing the related basic units, the formula of planar deployable structures’ mobility can be built and solves the mobility of ring deployable structure. The analysis method solves the mobility analysis of the multi-loop deployable structures which is difficulty by the traditional method, and plays an important role in further research about the mobility of other complex deployable structures.展开更多
Unifying the models for topology design and kinematic analysis has long been a desire for the research of parallel kinematic machines(PKMs). This requires that analytical description, formulation and operation for bot...Unifying the models for topology design and kinematic analysis has long been a desire for the research of parallel kinematic machines(PKMs). This requires that analytical description, formulation and operation for both finite and instantaneous motions are performed by the same mathematical tool. Based upon finite and instantaneous screw theory, a unified and systematic approach for topology design and kinematic analysis of PKMs is proposed in this paper. Using the derivative mapping between finite and instantaneous screws built in the authors’ previous work, the finite and instantaneous motions of PKMs are analytically described by the simple and non?redundant screws in quasi?vector and vector forms. And topological and parametric models of PKMs are algebraically formulated and related. These related topological and parametric models are ready to do type synthesis and kinematic analysis of PKMs under the unified framework of screw theory. In order to show the validity of the proposed approach, a kind of two?translational and three?rotational(2T3R)5?axis PKMs is taken as example. Numerous new structures of the 2T3R PKMs are synthe?sized as the results of topology design, and their Jacobian matrix is obtained easily for parameter optimization and performance evaluation. Some of the synthesized PKMs have outstanding capabilities in terms of large workspaces and flexible orientations, and have great potential for industrial applications of machining and manufacture. Among them, METROM PKM is a typical example which has attracted a lot of attention from global companies and already been developed as commercial products. The approach is a general and unified approach that can be used in the innovative design of different kinds of PKMs.展开更多
Coupling is the significant characteristic of parallel mechanism,while it is just the coupling that brings about much difficulty for the configuration design,theoretical analysis and the development of the control sys...Coupling is the significant characteristic of parallel mechanism,while it is just the coupling that brings about much difficulty for the configuration design,theoretical analysis and the development of the control system of the parallel mechanism. And recently,the research on the decoupled parallel mechanism becomes one of the research hot points in the mechanism fields. In this paper,a type synthesis method for the translational decoupled parallel mechanism( TDPM) is proposed based on the screw theory. To achieve the decoupling characteristics of the translational parallel mechanism,the translational decoupled criterion for type synthesis of the branches are presented in this paper. According to this criterion and the realization conditions of rotational degree of freedom of the mechanism proposed former,a large number of branches for the TDPM are obtained. Taking the three degrees of freedom( DOFs) TDPM as an example,the process of type synthesis is discussed in detail. Using this proposed type synthesis method,a serial of translational decoupled parallel mechanisms, including but not limited to all the existing typical 3-DOF TDPMs, are obtained, which identifies the correctness and effective of the method. The contents of this paper provide a reference and possess significant theoretical meanings for the synthesis and development of the novel decoupled parallel mechanisms.展开更多
A generally applicable criterion for all mechanism mobility has been an active domain in mechanism theory lasting more than 150 years. It is stated that the Modified Grübler-Kutzbach criterion for mobility has be...A generally applicable criterion for all mechanism mobility has been an active domain in mechanism theory lasting more than 150 years. It is stated that the Modified Grübler-Kutzbach criterion for mobility has been successfully used to solve the mobility of many more kinds of mechanisms, but never before has anyone proven the applicability and generality of the Modified Grübler-Kutzbach criterion in theory. In order to fill the gap, the applicability and generality of the Modified Grübler-Kutzbach Criterion of mechanism mobility is systematically demonstrated. Firstly, the mobility research background and the Modified Grübler-Kutzbach criterion are introduced. Secondly, some new definitions, such as half local freedom, non-common constraint space of a mechanism and common motion space of a mechanism, etc, are given to demonstrate the correctness and broad applicability of the Modified Grübler-Kutzbach criterion. Thirdly, the general applicability of the Modified Grübler-Kutzbach criterion is demonstrated based on screw theory. The mobilities of the classical DELASSUS mechanisms and a modern planar parallel mechanism, are determined through the Modified Grübler-Kutzbach criterion, which are as examples to show the practical application of the Modified Grübler-Kutzbach criterion.展开更多
The non-overconstrained 3-degrees of freedom（DOF） translational parallel mechanism（TPM） has received much attention due to its advantages in reduced cost of fabrication and assembly. Researches are being conducted...The non-overconstrained 3-degrees of freedom（DOF） translational parallel mechanism（TPM） has received much attention due to its advantages in reduced cost of fabrication and assembly. Researches are being conducted in the area of type synthesis, kinematic analysis and dimensional synthesis. Mobility, constraint singularity and isotropy of a 3-PRRRR non-overconstrained TPM are studied, where P denote the prismatic pair, R the revolute pair and the overline indicates the same axis direction of the kinematic pair The different arrangements of the three limbs affect the kinematic performance of this kind of TPM. First, the mobility analysis, actuation selection, and the constraint singularity of the general 3-PRRRR TPM are conducted based on screw theory. For a general 3-PRRRR TPM, the three prismatic pairs cannot be chosen as actuators and two kinds of constraint singularities are identified. In the first constraint singularity, the moving platform has four instantaneous DOFs. In the second constraint singularity, the moving platform has five instantaneous DOFs. Then, an orthogonal 3-PRRRR TPM is proposed, which can be actuated by three prismatic pairs and has no constraint singularities. Further, the forward and inverse kinematic analysis of the orthogonal TPM are presented. The input-output equations of the orthogonal TPM are totally decoupled. The full isotropy of the orthogonal TPM is proved by establishing the Jacobian matrix , which is an identity 3x3 diagonal matrix in the whole workspace. The orthogonal 3-PRRRR TPM has great potential in application like fast pick-and-place manipulator, parallel machine and micro-motion manipulator.展开更多
Existing biped robots mainly fall into two categories： robots with left and right feet and robots with upper and lower feet. The load carrying capability of a biped robot is quite limited since the two feet of a walk...Existing biped robots mainly fall into two categories： robots with left and right feet and robots with upper and lower feet. The load carrying capability of a biped robot is quite limited since the two feet of a walking robot supports the robot alternatively during walking. To improve the load carrying capability, a novel biped walking robot is proposed based on a 2-UPU＋2-UU parallel mechanism. The biped walking robot is composed of two identical platforms（feet） and four limbs, including two UPU（universal-prismatic-universal serial chain） limbs and two UU limbs. To enhance its terrain adaptability like articulated vehicles, the two feet of the biped walking robot are designed as two vehicles in detail. The conditions that the geometric parameters of the feet must satisfy are discussed. The degrees-of-freedom of the mechanism is analyzed by using screw theory. Gait analysis, kinematic analysis and stability analysis of the mechanism are carried out to verify the structural design parameters. The simulation results validate the feasibility of walking on rugged terrain. Experiments with a physical prototype show that the novel biped walking robot can walk stably on smooth terrain. Due to its unique feet design and high stiffness, the biped walking robot may adapt to rugged terrain and is suitable for load-carrying.展开更多
Developing a general mobility method/formula is a hot topic lasting for more than 150 years in kinematics. It is necessary to apply any mobility method to puzzling overconstrained mechanisms for verification of its ge...Developing a general mobility method/formula is a hot topic lasting for more than 150 years in kinematics. It is necessary to apply any mobility method to puzzling overconstrained mechanisms for verification of its generality. Altmann linkages are such recognized puzzling mechanisms that their mobility analysis is of important significance. A necessary condition for judging a general mobility method is that the method can be fit for Altmann linkages. Firstly, this study classes Altmann linkages into 17 types in terms of the numbers and types of kinematic pairs, and then Altmann overconstrained linkages are further classified into 4 types. Secondly, the mobility of Altmann overconstrained linkages is systematically analyzed by the Modified Grübler-Kutzbach criterion based on screw theory, where passive freedoms are defined as limb passive freedoms and mechanism passive freedoms. In addition, the full-cycle mobility is judged, which overcomes the shortcoming of instantaneous property of screw theory. It is shown that Modified Grübler-Kutzbach criterion not only obtains the correct numerical mobility, but also gives the mobility character by resolving reciprocal screws for the constraint system. This study lays the foundation of verification for the generality of Modified Grübler-Kutzbach criterion. Besides, Altmann overconstrained linkages almost comprise all kinds of modern parallel mechanisms and some classical mechanisms, which provides an important reference for mechanism mobility calculation.展开更多
Singularity analysis is an essential issue for the development and application of parallel manipulators.Most of the existing researches focus on the singularity of parallel manipulators are carried out based on the st...Singularity analysis is an essential issue for the development and application of parallel manipulators.Most of the existing researches focus on the singularity of parallel manipulators are carried out based on the study of Jacobian matrices.A 3-DOF parallel manipulator with symmetrical structure is presented.The novel parallel manipulator employs only revolute joints and consists of four closed-loop subchains connecting to both base and platform via revolute joints.The closed-loop subchain in each chain-leg is a spherical 6R linkage.The motion characteristics of the output link in the spherical 6R linkage with symmetrical structure are analyzed based on the interrelationships between screw systems.The constraints that are exerted on the platform by each chain-leg are investigated applying the concept of generalized kinematic pair in terms of equivalent screw system.Considering the geometric characteristics of the parallel manipulator,the singularity criteria of the parallel manipulator corresponding to different configurations are revealed based on the dependency of screw system and line geometry.The existing conditions of certain configuration that a singularity must occur are determined.This paper presents a new way of singularity analysis based on disposition of constraint forces on the geometrically identified constraint plane and the proposed approach is capable of avoiding the complexity in solving the Jacobian matrices.展开更多
基金Supported by National Natural Science Foundation of China(Grant Nos.51375420,51105322)
文摘The complexity of the kinematics and dynamics of a manipulator makes it necessary to simplify the modeling process.However,the traditional representations cannot achieve this because of the absence of coordinate invariance.Therefore,the coordinate invariant method is an important research issue.First,the rigid-body acceleration,the time derivative of the twist,is proved to be a screw,and its physical meaning is explained.Based on the twist and the rigid-body acceleration,the acceleration of the end-effector is expressed as a linear-bilinear form,and the kinematics Hessian matrix of the manipulator（represented by Lie bracket）is deduced.Further,Newton-Euler＇s equation is rewritten as a linear-bilinear form,from which the dynamics Hessian matrix of a rigid body is obtained.The formulae and the dynamics Hessian matrix are proved to be coordinate invariant.Referring to the principle of virtual work,the dynamics Hessian matrix of the parallel manipulator is gotten and the detailed dynamic model is derived.An index of dynamical coupling based on dynamics Hessian matrix is presented.In the end,a foldable parallel manipulator is taken as an example to validate the deduced kinematics and dynamics formulae.The screw theory based method can simplify the kinematics and dynamics of a manipulator,also the corresponding dynamics Hessian matrix can be used to evaluate the dynamical coupling of a manipulator.
基金Supported by National Natural Science Foundation of China(Grant No.51175422)
文摘Because the deployable structures are complex multi-loop structures and methods of derivation which lead to simpler kinematic and dynamic equations of motion are the subject of research effort, the kinematics and dynamics of deployable structures with scissor-like-elements are presented based on screw theory and the principle of virtual work respectively. According to the geometric characteristic of the deployable structure examined, the basic structural unit is the common scissor-like-element（SLE）. First, a spatial deployable structure, comprised of three SLEs, is defined, and the constraint topology graph is obtained. The equations of motion are then derived based on screw theory and the geometric nature of scissor elements. Second, to develop the dynamics of the whole deployable structure, the local coordinates of the SLEs and the Jacobian matrices of the center of mass of the deployable structure are derived. Then, the equivalent forces are assembled and added in the equations of motion based on the principle of virtual work. Finally, dynamic behavior and unfolded process of the deployable structure are simulated. Its figures of velocity, acceleration and input torque are obtained based on the simulate results. Screw theory not only provides an efficient solution formulation and theory guidance for complex multi-closed loop deployable structures, but also extends the method to solve dynamics of deployable structures. As an efficient mathematical tool, the simper equations of motion are derived based on screw theory.
基金supported by National Natural Science Foundation of China (Grant No. 50875227)
文摘The existence of coupling makes the parallel mechanism possess some special advantages over the serial mechanism, while it is just the coupling that brings about the parallel mechanism some limitations, such as complex workspace, high nonlinear relationship between input and output, difficulties in static and dynamic analysis, and the development of control system, which restricts its application fields. The decoupled parallel mechanism is currently one of the research focuses of the mechanism fields, while the study on the different characteristics between the deeoupled and coupled parallel mechanisms has not been reported. Therefore, this paper performs the systematic comparative analysis of the 3-RPUR and the 3-CPR parallel mechanisms. The features of the two mechanisms are described and their movement forms are analyzed with screw theory. The inverse and forward displacement solutions are solved and the Jacobian matrices are obtained. According to the Jacobian matrices and by using the theory of physical model of the solution space, the workspace, dexterity, velocity, payload capability, and stiffness of the mechanisms are analyzed with plotting the indices atlases. The research results prove that the effects of the coupling on the parallel mechanism are double-side, and then the adoption of the decoupled parallel mechanism should be determined by the requirements of the concrete application situation. The contents of this paper should be useful for the type synthesis and practical application of the parallel mechanism.
基金supported by National Natural Science Foundation of China(Grant No. 50875210)
文摘Scissor-like element has a number of applications in deployable structures such as planar deployable structure (PDS) and ring deployable structure(RDS). However, the mobility analysis of the multi-loop deployable structures is made more difficulty by the traditional mobility formula, because the deployable structure is a very complex structure with multi-loop. Therefore, On the basis of screw theory, the calculation method of mobility of deployable structures of SLE is thoroughly discussed. In order to investigate the mobility, decomposing and composing structures(DCS) are developed, and the basic units are able to be obtained. On the basis of the deployable structures’ geometrical characteristics, there exists a closed-loop quadrilateral structure and some non-closed-loop quadrilateral structures in PDS. Also, a six legs parallel structure is present in RDS. The basic units’ mobility can be solved by both the methods of screw theory and topology constraint graphs. Then, composing the related basic units, the formula of planar deployable structures’ mobility can be built and solves the mobility of ring deployable structure. The analysis method solves the mobility analysis of the multi-loop deployable structures which is difficulty by the traditional method, and plays an important role in further research about the mobility of other complex deployable structures.
基金Supported by National Natural Science Foundation of China(Grant No.51675366)Tianjin Research Program of Application Foundation and Advanced Technology(Grant Nos.16JCYBJC19300,15JCZDJC38900)
文摘Unifying the models for topology design and kinematic analysis has long been a desire for the research of parallel kinematic machines(PKMs). This requires that analytical description, formulation and operation for both finite and instantaneous motions are performed by the same mathematical tool. Based upon finite and instantaneous screw theory, a unified and systematic approach for topology design and kinematic analysis of PKMs is proposed in this paper. Using the derivative mapping between finite and instantaneous screws built in the authors’ previous work, the finite and instantaneous motions of PKMs are analytically described by the simple and non?redundant screws in quasi?vector and vector forms. And topological and parametric models of PKMs are algebraically formulated and related. These related topological and parametric models are ready to do type synthesis and kinematic analysis of PKMs under the unified framework of screw theory. In order to show the validity of the proposed approach, a kind of two?translational and three?rotational(2T3R)5?axis PKMs is taken as example. Numerous new structures of the 2T3R PKMs are synthe?sized as the results of topology design, and their Jacobian matrix is obtained easily for parameter optimization and performance evaluation. Some of the synthesized PKMs have outstanding capabilities in terms of large workspaces and flexible orientations, and have great potential for industrial applications of machining and manufacture. Among them, METROM PKM is a typical example which has attracted a lot of attention from global companies and already been developed as commercial products. The approach is a general and unified approach that can be used in the innovative design of different kinds of PKMs.
基金Sponsored by the National Natural Science Foundation of China(Grant No.51005195,51205339)
文摘Coupling is the significant characteristic of parallel mechanism,while it is just the coupling that brings about much difficulty for the configuration design,theoretical analysis and the development of the control system of the parallel mechanism. And recently,the research on the decoupled parallel mechanism becomes one of the research hot points in the mechanism fields. In this paper,a type synthesis method for the translational decoupled parallel mechanism( TDPM) is proposed based on the screw theory. To achieve the decoupling characteristics of the translational parallel mechanism,the translational decoupled criterion for type synthesis of the branches are presented in this paper. According to this criterion and the realization conditions of rotational degree of freedom of the mechanism proposed former,a large number of branches for the TDPM are obtained. Taking the three degrees of freedom( DOFs) TDPM as an example,the process of type synthesis is discussed in detail. Using this proposed type synthesis method,a serial of translational decoupled parallel mechanisms, including but not limited to all the existing typical 3-DOF TDPMs, are obtained, which identifies the correctness and effective of the method. The contents of this paper provide a reference and possess significant theoretical meanings for the synthesis and development of the novel decoupled parallel mechanisms.
基金supported by National Natural Science Foundation of China(Grant Nos. 51175446,50875227)the Science Supporting Plan of Education Department of Hebei Province,China(Grant No. 2008150)
文摘A generally applicable criterion for all mechanism mobility has been an active domain in mechanism theory lasting more than 150 years. It is stated that the Modified Grübler-Kutzbach criterion for mobility has been successfully used to solve the mobility of many more kinds of mechanisms, but never before has anyone proven the applicability and generality of the Modified Grübler-Kutzbach criterion in theory. In order to fill the gap, the applicability and generality of the Modified Grübler-Kutzbach Criterion of mechanism mobility is systematically demonstrated. Firstly, the mobility research background and the Modified Grübler-Kutzbach criterion are introduced. Secondly, some new definitions, such as half local freedom, non-common constraint space of a mechanism and common motion space of a mechanism, etc, are given to demonstrate the correctness and broad applicability of the Modified Grübler-Kutzbach criterion. Thirdly, the general applicability of the Modified Grübler-Kutzbach criterion is demonstrated based on screw theory. The mobilities of the classical DELASSUS mechanisms and a modern planar parallel mechanism, are determined through the Modified Grübler-Kutzbach criterion, which are as examples to show the practical application of the Modified Grübler-Kutzbach criterion.
基金supported by National Natural Science Foundation of China (Grant No. 50605055)
文摘The non-overconstrained 3-degrees of freedom（DOF） translational parallel mechanism（TPM） has received much attention due to its advantages in reduced cost of fabrication and assembly. Researches are being conducted in the area of type synthesis, kinematic analysis and dimensional synthesis. Mobility, constraint singularity and isotropy of a 3-PRRRR non-overconstrained TPM are studied, where P denote the prismatic pair, R the revolute pair and the overline indicates the same axis direction of the kinematic pair The different arrangements of the three limbs affect the kinematic performance of this kind of TPM. First, the mobility analysis, actuation selection, and the constraint singularity of the general 3-PRRRR TPM are conducted based on screw theory. For a general 3-PRRRR TPM, the three prismatic pairs cannot be chosen as actuators and two kinds of constraint singularities are identified. In the first constraint singularity, the moving platform has four instantaneous DOFs. In the second constraint singularity, the moving platform has five instantaneous DOFs. Then, an orthogonal 3-PRRRR TPM is proposed, which can be actuated by three prismatic pairs and has no constraint singularities. Further, the forward and inverse kinematic analysis of the orthogonal TPM are presented. The input-output equations of the orthogonal TPM are totally decoupled. The full isotropy of the orthogonal TPM is proved by establishing the Jacobian matrix , which is an identity 3x3 diagonal matrix in the whole workspace. The orthogonal 3-PRRRR TPM has great potential in application like fast pick-and-place manipulator, parallel machine and micro-motion manipulator.
基金supported by National Natural Science Foundation of China(Grant No.51175030)Fundamental Research Funds for the Central Universities of China(Grant No.2012JBZ002)
文摘Existing biped robots mainly fall into two categories： robots with left and right feet and robots with upper and lower feet. The load carrying capability of a biped robot is quite limited since the two feet of a walking robot supports the robot alternatively during walking. To improve the load carrying capability, a novel biped walking robot is proposed based on a 2-UPU＋2-UU parallel mechanism. The biped walking robot is composed of two identical platforms（feet） and four limbs, including two UPU（universal-prismatic-universal serial chain） limbs and two UU limbs. To enhance its terrain adaptability like articulated vehicles, the two feet of the biped walking robot are designed as two vehicles in detail. The conditions that the geometric parameters of the feet must satisfy are discussed. The degrees-of-freedom of the mechanism is analyzed by using screw theory. Gait analysis, kinematic analysis and stability analysis of the mechanism are carried out to verify the structural design parameters. The simulation results validate the feasibility of walking on rugged terrain. Experiments with a physical prototype show that the novel biped walking robot can walk stably on smooth terrain. Due to its unique feet design and high stiffness, the biped walking robot may adapt to rugged terrain and is suitable for load-carrying.
基金supported by National Natural Science Foundation of China(Grant No. 50875227)
文摘Developing a general mobility method/formula is a hot topic lasting for more than 150 years in kinematics. It is necessary to apply any mobility method to puzzling overconstrained mechanisms for verification of its generality. Altmann linkages are such recognized puzzling mechanisms that their mobility analysis is of important significance. A necessary condition for judging a general mobility method is that the method can be fit for Altmann linkages. Firstly, this study classes Altmann linkages into 17 types in terms of the numbers and types of kinematic pairs, and then Altmann overconstrained linkages are further classified into 4 types. Secondly, the mobility of Altmann overconstrained linkages is systematically analyzed by the Modified Grübler-Kutzbach criterion based on screw theory, where passive freedoms are defined as limb passive freedoms and mechanism passive freedoms. In addition, the full-cycle mobility is judged, which overcomes the shortcoming of instantaneous property of screw theory. It is shown that Modified Grübler-Kutzbach criterion not only obtains the correct numerical mobility, but also gives the mobility character by resolving reciprocal screws for the constraint system. This study lays the foundation of verification for the generality of Modified Grübler-Kutzbach criterion. Besides, Altmann overconstrained linkages almost comprise all kinds of modern parallel mechanisms and some classical mechanisms, which provides an important reference for mechanism mobility calculation.
基金supported by National Natural Science Foundation of China (Grant No. 50675016)
文摘Singularity analysis is an essential issue for the development and application of parallel manipulators.Most of the existing researches focus on the singularity of parallel manipulators are carried out based on the study of Jacobian matrices.A 3-DOF parallel manipulator with symmetrical structure is presented.The novel parallel manipulator employs only revolute joints and consists of four closed-loop subchains connecting to both base and platform via revolute joints.The closed-loop subchain in each chain-leg is a spherical 6R linkage.The motion characteristics of the output link in the spherical 6R linkage with symmetrical structure are analyzed based on the interrelationships between screw systems.The constraints that are exerted on the platform by each chain-leg are investigated applying the concept of generalized kinematic pair in terms of equivalent screw system.Considering the geometric characteristics of the parallel manipulator,the singularity criteria of the parallel manipulator corresponding to different configurations are revealed based on the dependency of screw system and line geometry.The existing conditions of certain configuration that a singularity must occur are determined.This paper presents a new way of singularity analysis based on disposition of constraint forces on the geometrically identified constraint plane and the proposed approach is capable of avoiding the complexity in solving the Jacobian matrices.
