In this paper, Copper sulfide of different size and shape were prepared with three methods by primary materials of Na2S, TAA, EDTA and CuS in water/alcohol (the volume ratio is 3:1 and pH value is 5～7) solution. The ...In this paper, Copper sulfide of different size and shape were prepared with three methods by primary materials of Na2S, TAA, EDTA and CuS in water/alcohol (the volume ratio is 3:1 and pH value is 5～7) solution. The synthetic nano-particles were measured by XRD, TEM and IR. The results showed that different synthetic methods affected the size (from 20nm to 50nm or so) and shape (regular ball shape, irregular ball shape and bar shape) of CuS nano-particles. These methods were available for simple synthesis technology, less cost and easily industrial production.展开更多
HCl and SO_2 emission is one of the major concerns related to municipal solid waste incinerator(MSWI). In this study, a material flow analysis model was developed to estimate the HCl and SO_2 concentrations in the MSW...HCl and SO_2 emission is one of the major concerns related to municipal solid waste incinerator(MSWI). In this study, a material flow analysis model was developed to estimate the HCl and SO_2 concentrations in the MSWI flue gases(FGs), and their concentrations in the full-scale MSWI were monitored. The calculated concentrations of HCl and SO_2 in the FG were 770–1300 mg/Nm^3 and 150–640 mg/Nm^3, respectively, in close agreement with the monitored values. More than 99% of Cl and 92% of S from the FG were captured into solid residues by the air pollution control(APC) systems. Moreover, since only 48.4%–67.5% of Cl and 21.3%–53.4% of S were transferred to the FG from the municipal solid waste(MSW), it was more reliable to estimate the source strengths and release amounts of HCl and SO_2 in the FG based on the amounts of Cl and S in the APC residues(AR) and exhaust gas rather than in the MSW. This simple method is easily applicable and the estimated results could provide scientific basis for the appropriate design and operation of the APC systems as well as corrosion control of heat recovery systems.展开更多
The fate of riverine sulfate ion (SO_(4)^(2-)) and its environmental effects in arid environment are difficult to evaluate due to its complicated sources and strongly coupled behaviors with water cycle which is signif...The fate of riverine sulfate ion (SO_(4)^(2-)) and its environmental effects in arid environment are difficult to evaluate due to its complicated sources and strongly coupled behaviors with water cycle which is significantly modified by humans.To understand the sulfur cycle in aquatic systems in arid environment,the chemical and sulfur and oxygen isotopic compositions (δ^(34)S_(SO4)and δ^(18)O_(SO4)) of major rivers around the Badain Jaran Desert,northwestern China,were investigated.These rivers had averaged SO_(4)^(2-)content at 1336μmol/L,over 10times higher than the global average.The δ^(34)S_(SO4)and δ^(18)O_(SO4)values ranged from-5.3‰to+11.8‰and+1.6‰to+12.8‰,respectively.The end-member analysis and the inverse model showed that riverine sulfate was mainly derived from evaporites dissolution (0-87%),sulfide oxidation (13%-100%) and precipitation (0-33%),indicating heterogeneity in sulfur sources and behaviors along the river drainage with the lithology variations and climate gradients.Multiple isotopic tools combining with hydro-chemistry compositions could be applied to reveal sulfur cycle in arid environment.Based on the calculation,sulfide oxidation plays the primary role in the headwater and upstream in the Qilian-Mountains area,where sulfide is widely exposed.While the proportion of evaporites dissolution contributing to riverine sulfate is much higher in downstream in a drier environment.Besides,less precipitation and higher temperature can lead to more intensive evaporation,affecting the process of sulfide oxidation and enhancing the rates of evaporites dissolution and sulfate precipitation in the basin.展开更多
文摘In this paper, Copper sulfide of different size and shape were prepared with three methods by primary materials of Na2S, TAA, EDTA and CuS in water/alcohol (the volume ratio is 3:1 and pH value is 5～7) solution. The synthetic nano-particles were measured by XRD, TEM and IR. The results showed that different synthetic methods affected the size (from 20nm to 50nm or so) and shape (regular ball shape, irregular ball shape and bar shape) of CuS nano-particles. These methods were available for simple synthesis technology, less cost and easily industrial production.
基金supported by the National Natural Science Foundation of China (No.21577102)the Major Science and Technology Program for Water Pollution Control and Treatment (No.2017ZX07202005)the Fundamental Research Funds for the Central Universities (No.22120170050)
文摘HCl and SO_2 emission is one of the major concerns related to municipal solid waste incinerator(MSWI). In this study, a material flow analysis model was developed to estimate the HCl and SO_2 concentrations in the MSWI flue gases(FGs), and their concentrations in the full-scale MSWI were monitored. The calculated concentrations of HCl and SO_2 in the FG were 770–1300 mg/Nm^3 and 150–640 mg/Nm^3, respectively, in close agreement with the monitored values. More than 99% of Cl and 92% of S from the FG were captured into solid residues by the air pollution control(APC) systems. Moreover, since only 48.4%–67.5% of Cl and 21.3%–53.4% of S were transferred to the FG from the municipal solid waste(MSW), it was more reliable to estimate the source strengths and release amounts of HCl and SO_2 in the FG based on the amounts of Cl and S in the APC residues(AR) and exhaust gas rather than in the MSW. This simple method is easily applicable and the estimated results could provide scientific basis for the appropriate design and operation of the APC systems as well as corrosion control of heat recovery systems.
基金supported by the Strategic Priority Research Program of Chinese Academy of Sciences (No. XDB26000000)the National Key Research and Development Program of China (No. 2020YFA0607700)+2 种基金the National Natural Science Foundation of China (Nos. 41730857 and 42273050)the Key Research Program of the Institute of Geology&Geophysics,CAS (No. IGGCAS-202204)support from the Youth Innovation Promotion Association CAS (No.2019067)。
文摘The fate of riverine sulfate ion (SO_(4)^(2-)) and its environmental effects in arid environment are difficult to evaluate due to its complicated sources and strongly coupled behaviors with water cycle which is significantly modified by humans.To understand the sulfur cycle in aquatic systems in arid environment,the chemical and sulfur and oxygen isotopic compositions (δ^(34)S_(SO4)and δ^(18)O_(SO4)) of major rivers around the Badain Jaran Desert,northwestern China,were investigated.These rivers had averaged SO_(4)^(2-)content at 1336μmol/L,over 10times higher than the global average.The δ^(34)S_(SO4)and δ^(18)O_(SO4)values ranged from-5.3‰to+11.8‰and+1.6‰to+12.8‰,respectively.The end-member analysis and the inverse model showed that riverine sulfate was mainly derived from evaporites dissolution (0-87%),sulfide oxidation (13%-100%) and precipitation (0-33%),indicating heterogeneity in sulfur sources and behaviors along the river drainage with the lithology variations and climate gradients.Multiple isotopic tools combining with hydro-chemistry compositions could be applied to reveal sulfur cycle in arid environment.Based on the calculation,sulfide oxidation plays the primary role in the headwater and upstream in the Qilian-Mountains area,where sulfide is widely exposed.While the proportion of evaporites dissolution contributing to riverine sulfate is much higher in downstream in a drier environment.Besides,less precipitation and higher temperature can lead to more intensive evaporation,affecting the process of sulfide oxidation and enhancing the rates of evaporites dissolution and sulfate precipitation in the basin.
