采用溶剂-非溶剂的方法,通过加入不同的晶形控制剂制备超细CL-20,并对晶形控制剂的种类和用量、加料方式等因素进行了分析。结果表明,晶形控制剂的种类、用量及样品溶剂加料方式严重地影响着超细CL-20的晶形。对于2.0 g CL-20原料,采用3...采用溶剂-非溶剂的方法,通过加入不同的晶形控制剂制备超细CL-20,并对晶形控制剂的种类和用量、加料方式等因素进行了分析。结果表明,晶形控制剂的种类、用量及样品溶剂加料方式严重地影响着超细CL-20的晶形。对于2.0 g CL-20原料,采用3.5 mL质量浓度2%聚乙烯醇类化合物(PV)晶形控制剂,所得到的超细粉末晶形大多为块状,晶体粒径最小可达到1μm;采用6.5 mL质量浓度5%聚氧乙烯醚类化合物(PT)晶形控制剂,所得到的超细粉末晶形也大多为块状,晶体粒径最小可达到2μm。采用喷壶方式加料,使用6.5 mL质量浓度5%PT晶形控制剂可使晶形呈椭圆形,晶体粒径最小可达到1μm,细化后的CL-20热敏感性更高,晶型仍为ε型。展开更多
A simpler and more convenient method for producing wear-resistant, TiC-reinforced coatings were investigated in this study. It consists of the simultaneous synthesis and deposition of TiC-Fe materials by oxyacetylene ...A simpler and more convenient method for producing wear-resistant, TiC-reinforced coatings were investigated in this study. It consists of the simultaneous synthesis and deposition of TiC-Fe materials by oxyacetylene flame spraying. Solid reagents bound together to form a single particle are injected into the flame stream where an in-situ reaction occurs. The reaction products are propelled onto a substrate to form a coating. Microstructural analyses reveal that TiC and Fe are the dominant phases in the coatings. The reaction between Ti and C happens step by step along with the reactive spray powder flight, and TiC-Fe materials were mainly synthesized where the spray distance is 125-170 mm. The TiC-Fe coatings are composed of alternate TiC-rich and TiC-poor lamellae with different microhardness of 11.9-13.7 and 3.0-6.0 GPa, respectively. Submicron and round TiC particles are dispersed within a ductile metal matrix. The peculiar microstructure is thought to be responsible for its good wear resistance, which is better nearly five times than WC-reinforced cermet coatings obtained by traditional oxyacetylene flame spray.展开更多
This research investigated the removal capacity of polymeric sub-micron ion-exchange resins(SMR) for removal of lead, copper, zinc, and nickel from natural waters in competition with natural organic matter(NOM). Polym...This research investigated the removal capacity of polymeric sub-micron ion-exchange resins(SMR) for removal of lead, copper, zinc, and nickel from natural waters in competition with natural organic matter(NOM). Polymeric SMR particles were created and tested to ensure that they were adequately dispersed in the solution. They removed little NOM(10%or less) from river water and wastewater, indicating that competition from NOM was not a major concern. SMR were able to remove 82% ± 0.2% of lead, 46% ± 0.6% of copper, 55% ±20% of zinc, and 17% ± 2% of nickel from river water spiked with 500 μg/L of each. Similarly,in wastewater, they were able to remove 86% ± 0.1% of lead, 38% ± 0.8% of copper, 28% ± 1%of zinc, and 11% ± 1% of nickel.展开更多
Cu 5%Cr alloy bulk material with submicron grains were fabricated by mechanical alloying and subsequent hot hydrostatic extrusion. The microstructure, mechanical properties and electrical conductivity of the alloy wer...Cu 5%Cr alloy bulk material with submicron grains were fabricated by mechanical alloying and subsequent hot hydrostatic extrusion. The microstructure, mechanical properties and electrical conductivity of the alloy were experimentally investigated, and the influence of the extrusion temperature on its microstructure and properties was made clear. Also, the strengthening mechanism of the alloy was discussed. It was revealed that the microstructure of the alloy is very fine, with an average grain size being about 100～120 nm, and thus possesses significant fine grain strengthening effect, leading to very high mechanical strength of 800～1 000 MPa. Meanwhile, the alloy also possesses quite good electrical conductivity and moderate tensile elongation, with the former in the range of 55%～70%(IACS) and the latter about 5% respectively.展开更多
The fluidization behavior of nano and sub-micron powders belonging to group C of Geldart＇s classification was studied in a mechanically vibrated fluidized bed （vibro-fluidized bed） at room temperature. Pretreated a...The fluidization behavior of nano and sub-micron powders belonging to group C of Geldart＇s classification was studied in a mechanically vibrated fluidized bed （vibro-fluidized bed） at room temperature. Pretreated air was used as the fluidizing gas whereas SiO2. Al2O3, TiO2, ZrSi, BaSO4 were solid particles. Mechanical vibration amplitudes were 0.1, 0.25, 0.35, 0.45mm, while the frequencies were 5, 20, 30, 40 Hz to investigate the effects of frequency and amplitude of mechanical vibration on minimum fluidization velocity, bed pressure drop, bed expansion, and the agglomerate size and size distribution, A novel technique was employed to determine the apparent minimum fluidization velocity from pressure drop signals. Richardson-Zaki equation was employed as nano-particles showed fluid like behavior when fluidized. The average size of agglomerates formed on top of the bed was smaller than those at the bottom, Size distribution of agglomerates on top was also more uniform compared to those near the distributor. Larger agglomerates at the bottom of the bed formed a small fraction of the bed particles. Average size of submicron agglomerates decreased with increasing the frequency of vibration, however nano particles were less sensitive to change in vibration frequency. Mechanical vibration enhanced the quality of fluidization by reducing channeling and rat-holing phenomena caused by interparticle cohesive forces.展开更多
In this study, WC-Co powder with WC submicron grain size of 0. 7 - 0. 9μm was used as feedstock powder to deposit wear resistant coating by home-made T J-9000 HVOF system. The deposition efficiency of the feedstock p...In this study, WC-Co powder with WC submicron grain size of 0. 7 - 0. 9μm was used as feedstock powder to deposit wear resistant coating by home-made T J-9000 HVOF system. The deposition efficiency of the feedstock powder was examined. Influences of the High Velocity Oxy-Fuel （HVOF） spraying parameters on the microstructures, phase compositions, microhardness, and wear resistance of sprayed coatings were investigated. The deposition efficiency of the feedstock powder was very high, and reached to 58%. The sprayed coatings were very dense, and their porosities were lower than 1% and could be lowered than 0. 42% with optimal spraying parameters. According to the X-ray Diffraction （ XRD ） analysis, the phase compositions of the sprayed coatings consisted of WC, Co, W2 C, and Co6 W6 C. W appeared at high flame power. The average microhardness of the coating was 1 100 HVo 1 and had reversely linear relationship with the porosity of coatings. The weight loss of the counter wear ring GCrl5 was 20 times than that of the sprayed WC-Co coating. At the load of 15 kg and rotational speed of 200 r/min of GCr15 counter wear ring, the friction coefficient was 0. 68 in the dry wear conditions. It was concluded that the sprayed submicron structural WC-12Co coating had good wear resistance.展开更多
In this study, we performed a highly time-resolved chemical characterization of nonrefractory submicron particles（NR-PM_1） in Beijing by using an Aerodyne high-resolution time-of-flight aerosol mass spectrometer（HR...In this study, we performed a highly time-resolved chemical characterization of nonrefractory submicron particles（NR-PM_1） in Beijing by using an Aerodyne high-resolution time-of-flight aerosol mass spectrometer（HR-ToF-AMS）. The results showed the average NR-PM_1 mass concentration to be 56.4 ± 58.0 μg/m^3, with a peak at 307.4 μg/m^3. Due to the high frequency of biomass burning in autumn, submicron particles significantly increased in organic content, which accounted for 51% of NR-PM_1 on average. Secondary inorganic aerosols（sulfate ＋ nitrate ＋ ammonium） accounted for 46% of NR-PM_1, of which sulfate,nitrate, and ammonium contributed 15%, 20%, and 11%, respectively. To determine the intrinsic relationships between the organic and inorganic species, we used the positive matrix factorization（PMF） model to merge the high-resolution mass spectra of the organic species and NO＋and NO_2~＋ions. The PMF analysis separated the mixed organic and nitrate（NO＋and NO_2~＋） spectra into four organic factors, including hydrocarbon-like organic aerosol（HOA）, oxygenated organic aerosol（OOA）, cooking organic aerosol（COA）, and biomass burning organic aerosol（BBOA）, as well as one nitrate inorganic aerosol（NIA） factor. COA（33%） and OOA（30%） contributed the most to the total organic aerosol（OA） mass, followed by BBOA（20%） and HOA（17%）. We successfully quantified the mass concentrations of the organic and inorganic nitrates by the NO＋and NO2＋ions signal in the organic and NIA factors. The organic nitrate mass varied from 0.01-6.8 μg/m^3, with an average of 1.0 ±1.1 μg/m^3, and organic nitrate components accounted for 10% of the total nitrate mass in this observation.展开更多
Nickel-rich layered oxides have drawn sustainable attentions for lithium ion batteries owing to their higher theoretical capacities and lower cost.However,nickel-rich layered oxides also have exposed several defects f...Nickel-rich layered oxides have drawn sustainable attentions for lithium ion batteries owing to their higher theoretical capacities and lower cost.However,nickel-rich layered oxides also have exposed several defects for commercial application,such as uncontrollable ordered layered structure,which leads to higher energy barrier for Li+diffusion.In addition,suffering from structural mutability,the bulk nickelrich cathode materials likely trigger overall volumetric variation and intergranular cracks,thus obstructing the lithium ion diffusion path and shortening the service life of the whole device.Herein,we report wellordered layered Li Ni0.8Co0.1Mn0.1O2 submicron spheroidal particles via an optimized co-precipitation and investigated as LIBs cathodes for high-performance lithium storage.The as-fabricated Li Ni0.8Co0.1Mn0.1O2 delivers high initial capacity of 228 mAh g–1,remarkable energy density of 866 Wh kg–1,rapid Li ion diffusion coefficient(10–9cm2s–1)and low voltage decay.The remarkable electrochemical performance should be ascribed to the well-ordered layered structure and uniform submicron spheroidal particles,which enhance the structural stability and ameliorate strain relaxation via reducing the parcel size and shortening Li-ion diffusion distance.This work anticipatorily provides an inspiration to better design particle morphology for structural stability and rate capability in electrochemistry energy storage devices.展开更多
We report the direct synthesis of ZnC0204 and ZnO/ZnC0204 submicron rod arrays grown on Ni foil current collectors via an ammonia-evaporation-induced method by controlling the ratio of Zn to Co. These three-dimension...We report the direct synthesis of ZnC0204 and ZnO/ZnC0204 submicron rod arrays grown on Ni foil current collectors via an ammonia-evaporation-induced method by controlling the ratio of Zn to Co. These three-dimensional （3D） hierar- chical self-supported nanostructures are composed of one-dimensional （1D） ZnCo204 rods and two-dimensional （2D） ZnO nanosheet bands perpendicular to the axis of the each ZnCo204 rod. We carefully deal with the heteroepitaxial growth mechanisms of hexagonal ZnO nanosheets from a crystallographic point of view. Furthermore, we demonstrate the ability of these high-surface-area ZnO/ZnCo204 heterostructured rods to enable improved electrolyte permeability and Li ion transfer, thereby enhancing their Li storage capability （-900 mA.h.g-1 at a rate of 45 mA.h.g-1） for Li ion battery electrodes.展开更多
基金This work was supported by the National Natural Science Foundation of China (Nos.21203107,51422204,and 51372132) and the National Basic Research Program of China (No.2013CB228506).
基金This work was supported by the National "863" Project of China under grant No. 715-009-0130.
文摘A simpler and more convenient method for producing wear-resistant, TiC-reinforced coatings were investigated in this study. It consists of the simultaneous synthesis and deposition of TiC-Fe materials by oxyacetylene flame spraying. Solid reagents bound together to form a single particle are injected into the flame stream where an in-situ reaction occurs. The reaction products are propelled onto a substrate to form a coating. Microstructural analyses reveal that TiC and Fe are the dominant phases in the coatings. The reaction between Ti and C happens step by step along with the reactive spray powder flight, and TiC-Fe materials were mainly synthesized where the spray distance is 125-170 mm. The TiC-Fe coatings are composed of alternate TiC-rich and TiC-poor lamellae with different microhardness of 11.9-13.7 and 3.0-6.0 GPa, respectively. Submicron and round TiC particles are dispersed within a ductile metal matrix. The peculiar microstructure is thought to be responsible for its good wear resistance, which is better nearly five times than WC-reinforced cermet coatings obtained by traditional oxyacetylene flame spray.
基金funded by the Natural Sciences and Engineering Research Council of Canada (NSERC) (RGPIN 06246)Ontario Research Fund (ORF) (203364)
文摘This research investigated the removal capacity of polymeric sub-micron ion-exchange resins(SMR) for removal of lead, copper, zinc, and nickel from natural waters in competition with natural organic matter(NOM). Polymeric SMR particles were created and tested to ensure that they were adequately dispersed in the solution. They removed little NOM(10%or less) from river water and wastewater, indicating that competition from NOM was not a major concern. SMR were able to remove 82% ± 0.2% of lead, 46% ± 0.6% of copper, 55% ±20% of zinc, and 17% ± 2% of nickel from river water spiked with 500 μg/L of each. Similarly,in wastewater, they were able to remove 86% ± 0.1% of lead, 38% ± 0.8% of copper, 28% ± 1%of zinc, and 11% ± 1% of nickel.
文摘Cu 5%Cr alloy bulk material with submicron grains were fabricated by mechanical alloying and subsequent hot hydrostatic extrusion. The microstructure, mechanical properties and electrical conductivity of the alloy were experimentally investigated, and the influence of the extrusion temperature on its microstructure and properties was made clear. Also, the strengthening mechanism of the alloy was discussed. It was revealed that the microstructure of the alloy is very fine, with an average grain size being about 100～120 nm, and thus possesses significant fine grain strengthening effect, leading to very high mechanical strength of 800～1 000 MPa. Meanwhile, the alloy also possesses quite good electrical conductivity and moderate tensile elongation, with the former in the range of 55%～70%(IACS) and the latter about 5% respectively.
基金the financial support received from Ontario Research Fund for this study
文摘The fluidization behavior of nano and sub-micron powders belonging to group C of Geldart＇s classification was studied in a mechanically vibrated fluidized bed （vibro-fluidized bed） at room temperature. Pretreated air was used as the fluidizing gas whereas SiO2. Al2O3, TiO2, ZrSi, BaSO4 were solid particles. Mechanical vibration amplitudes were 0.1, 0.25, 0.35, 0.45mm, while the frequencies were 5, 20, 30, 40 Hz to investigate the effects of frequency and amplitude of mechanical vibration on minimum fluidization velocity, bed pressure drop, bed expansion, and the agglomerate size and size distribution, A novel technique was employed to determine the apparent minimum fluidization velocity from pressure drop signals. Richardson-Zaki equation was employed as nano-particles showed fluid like behavior when fluidized. The average size of agglomerates formed on top of the bed was smaller than those at the bottom, Size distribution of agglomerates on top was also more uniform compared to those near the distributor. Larger agglomerates at the bottom of the bed formed a small fraction of the bed particles. Average size of submicron agglomerates decreased with increasing the frequency of vibration, however nano particles were less sensitive to change in vibration frequency. Mechanical vibration enhanced the quality of fluidization by reducing channeling and rat-holing phenomena caused by interparticle cohesive forces.
文摘In this study, WC-Co powder with WC submicron grain size of 0. 7 - 0. 9μm was used as feedstock powder to deposit wear resistant coating by home-made T J-9000 HVOF system. The deposition efficiency of the feedstock powder was examined. Influences of the High Velocity Oxy-Fuel （HVOF） spraying parameters on the microstructures, phase compositions, microhardness, and wear resistance of sprayed coatings were investigated. The deposition efficiency of the feedstock powder was very high, and reached to 58%. The sprayed coatings were very dense, and their porosities were lower than 1% and could be lowered than 0. 42% with optimal spraying parameters. According to the X-ray Diffraction （ XRD ） analysis, the phase compositions of the sprayed coatings consisted of WC, Co, W2 C, and Co6 W6 C. W appeared at high flame power. The average microhardness of the coating was 1 100 HVo 1 and had reversely linear relationship with the porosity of coatings. The weight loss of the counter wear ring GCrl5 was 20 times than that of the sprayed WC-Co coating. At the load of 15 kg and rotational speed of 200 r/min of GCr15 counter wear ring, the friction coefficient was 0. 68 in the dry wear conditions. It was concluded that the sprayed submicron structural WC-12Co coating had good wear resistance.
基金supported by“Strategic Priority Research Program”of the Chinese Academy of Sciences(No.XDB05020201)the Beijing Natural Science Foundation(No.8142034)
文摘In this study, we performed a highly time-resolved chemical characterization of nonrefractory submicron particles（NR-PM_1） in Beijing by using an Aerodyne high-resolution time-of-flight aerosol mass spectrometer（HR-ToF-AMS）. The results showed the average NR-PM_1 mass concentration to be 56.4 ± 58.0 μg/m^3, with a peak at 307.4 μg/m^3. Due to the high frequency of biomass burning in autumn, submicron particles significantly increased in organic content, which accounted for 51% of NR-PM_1 on average. Secondary inorganic aerosols（sulfate ＋ nitrate ＋ ammonium） accounted for 46% of NR-PM_1, of which sulfate,nitrate, and ammonium contributed 15%, 20%, and 11%, respectively. To determine the intrinsic relationships between the organic and inorganic species, we used the positive matrix factorization（PMF） model to merge the high-resolution mass spectra of the organic species and NO＋and NO_2~＋ions. The PMF analysis separated the mixed organic and nitrate（NO＋and NO_2~＋） spectra into four organic factors, including hydrocarbon-like organic aerosol（HOA）, oxygenated organic aerosol（OOA）, cooking organic aerosol（COA）, and biomass burning organic aerosol（BBOA）, as well as one nitrate inorganic aerosol（NIA） factor. COA（33%） and OOA（30%） contributed the most to the total organic aerosol（OA） mass, followed by BBOA（20%） and HOA（17%）. We successfully quantified the mass concentrations of the organic and inorganic nitrates by the NO＋and NO2＋ions signal in the organic and NIA factors. The organic nitrate mass varied from 0.01-6.8 μg/m^3, with an average of 1.0 ±1.1 μg/m^3, and organic nitrate components accounted for 10% of the total nitrate mass in this observation.
基金supported by the National Natural Science Foundation of China (21573083)1000 Young Talent (to Deli Wang)the Innovation Research Funds of HuaZhong University of Science and Technology (2017KFYXJJ164)。
文摘Nickel-rich layered oxides have drawn sustainable attentions for lithium ion batteries owing to their higher theoretical capacities and lower cost.However,nickel-rich layered oxides also have exposed several defects for commercial application,such as uncontrollable ordered layered structure,which leads to higher energy barrier for Li+diffusion.In addition,suffering from structural mutability,the bulk nickelrich cathode materials likely trigger overall volumetric variation and intergranular cracks,thus obstructing the lithium ion diffusion path and shortening the service life of the whole device.Herein,we report wellordered layered Li Ni0.8Co0.1Mn0.1O2 submicron spheroidal particles via an optimized co-precipitation and investigated as LIBs cathodes for high-performance lithium storage.The as-fabricated Li Ni0.8Co0.1Mn0.1O2 delivers high initial capacity of 228 mAh g–1,remarkable energy density of 866 Wh kg–1,rapid Li ion diffusion coefficient(10–9cm2s–1)and low voltage decay.The remarkable electrochemical performance should be ascribed to the well-ordered layered structure and uniform submicron spheroidal particles,which enhance the structural stability and ameliorate strain relaxation via reducing the parcel size and shortening Li-ion diffusion distance.This work anticipatorily provides an inspiration to better design particle morphology for structural stability and rate capability in electrochemistry energy storage devices.
文摘We report the direct synthesis of ZnC0204 and ZnO/ZnC0204 submicron rod arrays grown on Ni foil current collectors via an ammonia-evaporation-induced method by controlling the ratio of Zn to Co. These three-dimensional （3D） hierar- chical self-supported nanostructures are composed of one-dimensional （1D） ZnCo204 rods and two-dimensional （2D） ZnO nanosheet bands perpendicular to the axis of the each ZnCo204 rod. We carefully deal with the heteroepitaxial growth mechanisms of hexagonal ZnO nanosheets from a crystallographic point of view. Furthermore, we demonstrate the ability of these high-surface-area ZnO/ZnCo204 heterostructured rods to enable improved electrolyte permeability and Li ion transfer, thereby enhancing their Li storage capability （-900 mA.h.g-1 at a rate of 45 mA.h.g-1） for Li ion battery electrodes.
