Lightening structure is one of the goals of many fields of research. As a result, magnesium alloys are studied due to their low density. However, one drawback of these alloys is their low formability at room temperatu...Lightening structure is one of the goals of many fields of research. As a result, magnesium alloys are studied due to their low density. However, one drawback of these alloys is their low formability at room temperature due to their hexagonal closed-packed structure. In the present work, the forming capacity of an AZ31 Mg alloys has been studied using a mini deep-drawing device, image correlation techniques and tests (tension and expansion) at temperatures contained between 20°C and 200°C. To investigate formability limits of Mg alloys in expansion, major and minor strains data were generated using hemispherical punch tests and analyzed with 3D digital images correlation techniques. Thanks to images correlation, strains on the surface of the samples were observed by means of a double digitization of the sample in three dimensions before and after deformation by using stereoscopic vision and triangulation. Image correlations have also been used in 2D to measure strains on the surface of the tensile test samples. These tests gave interesting information on the evolution of various parameters such as hardening coefficient, strain rate sensitivity parameter, and Lankford coefficient, which may affect the behavior of the alloys. Finally, the forming limits in both configurations (tension and expansion) were compared and discussed.展开更多
In structure inspections, applications of optical techniques are rare, but the advantages of a noncontact, full field technique using a simple apparatus are attractive. The main requirements for structure inspection a...In structure inspections, applications of optical techniques are rare, but the advantages of a noncontact, full field technique using a simple apparatus are attractive. The main requirements for structure inspection are the full-field strain measurement with the required precision and on-site measurement ability. The digital correlation method （DCM）, a new optical deformation measurement tool, can satisfy all of the requirements for structure inspection. A smoothing algorithm which can greatly improve the strain measurement precision, and a 3-D DCM have been developed in this paper. For verifying this improvement, a comparison of strain measurements by computer-simulated speckle images has been carried out. Additionally, three structure inspection examples that cover typical materials and structure styles are presented： the interface shear stress distribution for reinforced concrete piles bedded on rock, the 3-D strain distribution of a composite vessel structure, and stresses in a hookup that connects two steel bridge structures. All the examples show that the new structural inspection tool is exemplary and illustrates the obvious advantages of this optical non-destructive technique.展开更多
文摘Lightening structure is one of the goals of many fields of research. As a result, magnesium alloys are studied due to their low density. However, one drawback of these alloys is their low formability at room temperature due to their hexagonal closed-packed structure. In the present work, the forming capacity of an AZ31 Mg alloys has been studied using a mini deep-drawing device, image correlation techniques and tests (tension and expansion) at temperatures contained between 20°C and 200°C. To investigate formability limits of Mg alloys in expansion, major and minor strains data were generated using hemispherical punch tests and analyzed with 3D digital images correlation techniques. Thanks to images correlation, strains on the surface of the samples were observed by means of a double digitization of the sample in three dimensions before and after deformation by using stereoscopic vision and triangulation. Image correlations have also been used in 2D to measure strains on the surface of the tensile test samples. These tests gave interesting information on the evolution of various parameters such as hardening coefficient, strain rate sensitivity parameter, and Lankford coefficient, which may affect the behavior of the alloys. Finally, the forming limits in both configurations (tension and expansion) were compared and discussed.
文摘In structure inspections, applications of optical techniques are rare, but the advantages of a noncontact, full field technique using a simple apparatus are attractive. The main requirements for structure inspection are the full-field strain measurement with the required precision and on-site measurement ability. The digital correlation method （DCM）, a new optical deformation measurement tool, can satisfy all of the requirements for structure inspection. A smoothing algorithm which can greatly improve the strain measurement precision, and a 3-D DCM have been developed in this paper. For verifying this improvement, a comparison of strain measurements by computer-simulated speckle images has been carried out. Additionally, three structure inspection examples that cover typical materials and structure styles are presented： the interface shear stress distribution for reinforced concrete piles bedded on rock, the 3-D strain distribution of a composite vessel structure, and stresses in a hookup that connects two steel bridge structures. All the examples show that the new structural inspection tool is exemplary and illustrates the obvious advantages of this optical non-destructive technique.
