Entropy generation minimization for heat and mass transfer process in a solid-gas reactor is carried out based on constructal theory by using triangular elemental area. The aspect ratio of the triangular elemental are...Entropy generation minimization for heat and mass transfer process in a solid-gas reactor is carried out based on constructal theory by using triangular elemental area. The aspect ratio of the triangular elemental area is optimized under constraint conditions. A number of optimal triangular elements are assembled to a new large rectangular area, which is optimised again. The procedure is repeated until the control-volume is covered, and the complete analytical results are obtained. The effects of some parameters on minimum entropy generation are analysed by nu-merical examples. The results show that smaller entropy generation can be ob-tained when the optimization for a given volume is carried out on the basis of tri-angular elements than those obtained on the basis of rectangular elements.展开更多
Certain non-metallic granules （NMG） were selected as the research object. It was proposed to conduct the volume compression experiments as well as those on the NMG physical properties at high stress levels. Then, no...Certain non-metallic granules （NMG） were selected as the research object. It was proposed to conduct the volume compression experiments as well as those on the NMG physical properties at high stress levels. Then, not only the volume compression ratio curve but also the extended Drucker-Prager linear model were obtained. In addition, through the friction strength tests, parameters of the Mohr-Coulomb model were gained, which proved in basic agreement with those of the extended Drucker-Prager linear model. Additionally, curves of the friction coefficients between the NMG and the sheet metal trader different pressures were also obtained. Based on the material performance experiments, numerical analysis in respect of flexible-die forming process with solid granule medium （SGM） was conducted. The die and device for experiments of solid granule medium forming （SGMF） on sheet metal were designed and manufactured. Typical parabolic parts were successfully trial-produced. The tests and simulation results show that the sheet formability is significantly improved for the extraordinary friction performance during interaction between the SGM and the sheet metal surface. The process control and die structure are simple, and the shaped work-pieces enjoy many advantages, such as satisfactory surface quality and favorable die fitability, which offers a brand-new method and means for processing and preparation of sheet metals.展开更多
According to physiological and biochemical characteristics of Leptospirillum ferriphilum, a strain of object bacteria was isolated successfully. Bacteria were enriched by selective liquid medium and plated on designed...According to physiological and biochemical characteristics of Leptospirillum ferriphilum, a strain of object bacteria was isolated successfully. Bacteria were enriched by selective liquid medium and plated on designed single-layered agar solid medium. Colony was cultured and bacteria were collected. The morphologies of the object bacteria were observed using crystal violet staining, scanning electron microscope（SEM） and transmission electron microscope （TEM）. The result of 16S rDNA identification shows that this bacterium belongs to Leptospirillum ferriphilum and it is named as Leptospirillum ferriphilum strain D1. These results indicate that this new single-layered agar solid medium is efficient and physiological-biochemical characteristics show that the optimum simple for isolation of Leptospirillum ferriphilum. Additionally, initial pH value and its growth temperature are 1.68 and 40℃.展开更多
基金the Program for New Century Excellent Talents in Universities of China (Grant No. NCET-04-1006)Foundation for the Author of National Excellent Doctoral Dissertation of China (Grant No. 200136)
文摘Entropy generation minimization for heat and mass transfer process in a solid-gas reactor is carried out based on constructal theory by using triangular elemental area. The aspect ratio of the triangular elemental area is optimized under constraint conditions. A number of optimal triangular elements are assembled to a new large rectangular area, which is optimised again. The procedure is repeated until the control-volume is covered, and the complete analytical results are obtained. The effects of some parameters on minimum entropy generation are analysed by nu-merical examples. The results show that smaller entropy generation can be ob-tained when the optimization for a given volume is carried out on the basis of tri-angular elements than those obtained on the basis of rectangular elements.
基金Project(50775197)supported by the National Natural Science Foundation of China
文摘Certain non-metallic granules （NMG） were selected as the research object. It was proposed to conduct the volume compression experiments as well as those on the NMG physical properties at high stress levels. Then, not only the volume compression ratio curve but also the extended Drucker-Prager linear model were obtained. In addition, through the friction strength tests, parameters of the Mohr-Coulomb model were gained, which proved in basic agreement with those of the extended Drucker-Prager linear model. Additionally, curves of the friction coefficients between the NMG and the sheet metal trader different pressures were also obtained. Based on the material performance experiments, numerical analysis in respect of flexible-die forming process with solid granule medium （SGM） was conducted. The die and device for experiments of solid granule medium forming （SGMF） on sheet metal were designed and manufactured. Typical parabolic parts were successfully trial-produced. The tests and simulation results show that the sheet formability is significantly improved for the extraordinary friction performance during interaction between the SGM and the sheet metal surface. The process control and die structure are simple, and the shaped work-pieces enjoy many advantages, such as satisfactory surface quality and favorable die fitability, which offers a brand-new method and means for processing and preparation of sheet metals.
基金Projects(50374075, 50321402) supported by the National Natural Science Foundation of ChinaProject(2004CB619204) supported by the National Basic Research and Development Program of China+1 种基金Project(200549) supported by the Specialized Research Fund of the NationalExcellent PhD Thesis
文摘According to physiological and biochemical characteristics of Leptospirillum ferriphilum, a strain of object bacteria was isolated successfully. Bacteria were enriched by selective liquid medium and plated on designed single-layered agar solid medium. Colony was cultured and bacteria were collected. The morphologies of the object bacteria were observed using crystal violet staining, scanning electron microscope（SEM） and transmission electron microscope （TEM）. The result of 16S rDNA identification shows that this bacterium belongs to Leptospirillum ferriphilum and it is named as Leptospirillum ferriphilum strain D1. These results indicate that this new single-layered agar solid medium is efficient and physiological-biochemical characteristics show that the optimum simple for isolation of Leptospirillum ferriphilum. Additionally, initial pH value and its growth temperature are 1.68 and 40℃.
