A high-entropy ceramic oxide is used as the cathode for the first time for proton-conducting solid oxide fuel cells(H-SOFCs).The Fe_(0.6)Mn_(0.6)Co_(0.6)Ni_(0.6)Cr_(0.6)O_(4)(FMCNC)high-entropy spinel oxide has been s...A high-entropy ceramic oxide is used as the cathode for the first time for proton-conducting solid oxide fuel cells(H-SOFCs).The Fe_(0.6)Mn_(0.6)Co_(0.6)Ni_(0.6)Cr_(0.6)O_(4)(FMCNC)high-entropy spinel oxide has been successfully prepared,and the in situ chemical stability test demonstrates that the FMCNC material has good stability against CO_(2).The first-principles calculation indicates that the high-entropy structure enhances the properties of the FMCNC material that surpasses their individual components,leading to lower O_(2)adsorption energy for FMCNC than that for the individual components.The HSOFC using the FMCNC cathode reaches an encouraging peak power density(PPD)of 1052 mW·cm^(-2)at 700℃,which is higher than those of the H-SOFCs reported recently.Additional comparison was made between the high-entropy FMCNC cathode and the traditional Mn_(1.6)Cu_(1.4)O_(4)(MCO)spinel cathode without the high-entropy structure,revealing that the formation of the high-entropy material allows the enhanced protonation ability as well as the movement of the O p-band center closer to the Fermi level,thus improving the cathode catalytic activity.As a result,the high-entropy FMCNC has a much-decreased polarization resistance of 0.057Ω·cm^(2)at 700℃,which is half of that for the traditional MCO spinel cathode without the high-entropy design.The excellent performance of the FMCNC cell indicates that the high-entropy design makes a new life for the spinel oxide as the cathode for HSOFCs,offering a novel and promising route for the development of high-performance materials for H-SOFCs.展开更多
基金supported by the National Natural Science Foundation of China(Grant No.51972183)Hundred Youth Talents Program of Hunan and the Startup Funding for Talents at University of South China。
文摘A high-entropy ceramic oxide is used as the cathode for the first time for proton-conducting solid oxide fuel cells(H-SOFCs).The Fe_(0.6)Mn_(0.6)Co_(0.6)Ni_(0.6)Cr_(0.6)O_(4)(FMCNC)high-entropy spinel oxide has been successfully prepared,and the in situ chemical stability test demonstrates that the FMCNC material has good stability against CO_(2).The first-principles calculation indicates that the high-entropy structure enhances the properties of the FMCNC material that surpasses their individual components,leading to lower O_(2)adsorption energy for FMCNC than that for the individual components.The HSOFC using the FMCNC cathode reaches an encouraging peak power density(PPD)of 1052 mW·cm^(-2)at 700℃,which is higher than those of the H-SOFCs reported recently.Additional comparison was made between the high-entropy FMCNC cathode and the traditional Mn_(1.6)Cu_(1.4)O_(4)(MCO)spinel cathode without the high-entropy structure,revealing that the formation of the high-entropy material allows the enhanced protonation ability as well as the movement of the O p-band center closer to the Fermi level,thus improving the cathode catalytic activity.As a result,the high-entropy FMCNC has a much-decreased polarization resistance of 0.057Ω·cm^(2)at 700℃,which is half of that for the traditional MCO spinel cathode without the high-entropy design.The excellent performance of the FMCNC cell indicates that the high-entropy design makes a new life for the spinel oxide as the cathode for HSOFCs,offering a novel and promising route for the development of high-performance materials for H-SOFCs.
