In order to provide a reliable reference for utilizing Indonesia vanadium titano-magnetite(VTM) in blast furnace(BF) economically, metallurgical properties of iron ore sinter with addition of Indonesia VTM in mixed si...In order to provide a reliable reference for utilizing Indonesia vanadium titano-magnetite(VTM) in blast furnace(BF) economically, metallurgical properties of iron ore sinter with addition of Indonesia VTM in mixed sintering materials were investigated, including low-temperature reduction degradation index(RDI), reducibility index(RI), and softening/melting properties. Additionally, influenced mechanism of Indonesia VTM on metallurgical properties of sinter was studied. It is found that adding Indonesia VTM in sintering process quickly increases the RDI of sinters, and decreases the RI from 78.02% to 68.43%. Moreover, both beginning temperature(T_4) and final temperature(TD) of softening/melting increase gradually, and cohesive zone temperature range(T_D–T_4) enlarges from 219 oC to 315 oC. As a result, the permeability of cohesive zone gets worse, which is proven by the higher maximum pressure drop(δPmax) in softening/melting experiments. It is concluded that, after comprehensively considering all metallurgical properties mentioned above, the proper proportion of Indonesia VTM in sintering process is proposed in the new raw materials conditions.展开更多
13 kinds of iron ores （6 from Australia and 7 from Brazil） were studied on their properties concerning CW （Combined Water） decomposition, FezO3 decomposition and softening-melting in air atmosphere through the cha...13 kinds of iron ores （6 from Australia and 7 from Brazil） were studied on their properties concerning CW （Combined Water） decomposition, FezO3 decomposition and softening-melting in air atmosphere through the characterization method of TG-DSC （Thermogravimetry-Differential Scanning Caloremetry ）. The experimental results of the Australian ores and Brazilian ores differ in terms of the initial temperature, temperature range and endothermic amount of CW decomposition,and besides, the content of CW. It is estimated that for every percent increase of CW content in sintering raw material, the extra thermal amount absorbed in the process is about 1.83 x 104 kJ, which equals to the thermal capacity of 0.625 kg of standard coal burning up completely. As to the decomposition of Fe203 ,the initial temperatures, terminal temperatures and temperature ranges of the Australian and Brazilian ores are quite close. However, the endothermic amount of Fe2O3 decomposition of the two turns out rather different： the endothermic capacity of Fe2O3 decomposition of the Australian ores is greater than that of the Brazilian ores. Furthermore, the liquid amount generated in the softening-melting process is closely related to the SiO2 content in iron ore. The higher SiO2 content the ore contains, the more liquid volume it will generate in the softening-melting process of iron ore.展开更多
基金Projects(51604069,51604049,U1508213) supported by the National Natural Science Foundation of ChinaProject(N162504004) supported by the Fundamental Research Funds for the Central Universities,ChinaProjects(2017YFB0603800,2017YFB0603801) supported by the National Key R&D Program of China
文摘In order to provide a reliable reference for utilizing Indonesia vanadium titano-magnetite(VTM) in blast furnace(BF) economically, metallurgical properties of iron ore sinter with addition of Indonesia VTM in mixed sintering materials were investigated, including low-temperature reduction degradation index(RDI), reducibility index(RI), and softening/melting properties. Additionally, influenced mechanism of Indonesia VTM on metallurgical properties of sinter was studied. It is found that adding Indonesia VTM in sintering process quickly increases the RDI of sinters, and decreases the RI from 78.02% to 68.43%. Moreover, both beginning temperature(T_4) and final temperature(TD) of softening/melting increase gradually, and cohesive zone temperature range(T_D–T_4) enlarges from 219 oC to 315 oC. As a result, the permeability of cohesive zone gets worse, which is proven by the higher maximum pressure drop(δPmax) in softening/melting experiments. It is concluded that, after comprehensively considering all metallurgical properties mentioned above, the proper proportion of Indonesia VTM in sintering process is proposed in the new raw materials conditions.
文摘13 kinds of iron ores （6 from Australia and 7 from Brazil） were studied on their properties concerning CW （Combined Water） decomposition, FezO3 decomposition and softening-melting in air atmosphere through the characterization method of TG-DSC （Thermogravimetry-Differential Scanning Caloremetry ）. The experimental results of the Australian ores and Brazilian ores differ in terms of the initial temperature, temperature range and endothermic amount of CW decomposition,and besides, the content of CW. It is estimated that for every percent increase of CW content in sintering raw material, the extra thermal amount absorbed in the process is about 1.83 x 104 kJ, which equals to the thermal capacity of 0.625 kg of standard coal burning up completely. As to the decomposition of Fe203 ,the initial temperatures, terminal temperatures and temperature ranges of the Australian and Brazilian ores are quite close. However, the endothermic amount of Fe2O3 decomposition of the two turns out rather different： the endothermic capacity of Fe2O3 decomposition of the Australian ores is greater than that of the Brazilian ores. Furthermore, the liquid amount generated in the softening-melting process is closely related to the SiO2 content in iron ore. The higher SiO2 content the ore contains, the more liquid volume it will generate in the softening-melting process of iron ore.
