An engineering technology for the comprehensive treatments of sewage sludge and mine wastewater in smal town was introduced. As fil ing materials, gangue to fil in the col apse basin, construction waste, household ref...An engineering technology for the comprehensive treatments of sewage sludge and mine wastewater in smal town was introduced. As fil ing materials, gangue to fil in the col apse basin, construction waste, household refuse and ex-cess sludge as wel as clay were mixed with water into organic fil ing soil, turning the waste sludge into useful soil matrix, which solved the difficulties in growing plants in the reclaimed land that lack of organic soil. The col apse basin was de-signed into oxidation pond, wetland and land infiltration system to treat industrial wastewater and domestic wastewater, realizing the up-to-standard release after sewage treatment.展开更多
针对制革废水高COD、高总氮的问题,提出了基于上流式厌氧污泥床(UASB)、上流式反硝化污泥床(UDNSB)、生物接触氧化池的生物处理组合工艺,进行了为期321 d的现场中试研究。研究结果表明,对于COD、TN、NH_4^+-N平均浓度分别为2 740、278和...针对制革废水高COD、高总氮的问题,提出了基于上流式厌氧污泥床(UASB)、上流式反硝化污泥床(UDNSB)、生物接触氧化池的生物处理组合工艺,进行了为期321 d的现场中试研究。研究结果表明,对于COD、TN、NH_4^+-N平均浓度分别为2 740、278和193 mg·L^(-1)的制革废水,在硝化液回流比R为300%,UASB反应器、UDNSB反应器、生物接触氧化池的水力停留时间(HRT)分别为11、22和57 h,平均容积负荷分别为5.63 kg COD·(m^3·d)^(-1)、0.30 kg TN·(m^3·d)^(-1)和0.11 kg NH+4-N·(m^3·d)^(-1)的条件下,该组合工艺处理出水COD、TN和NH_4^+-N的平均浓度分别为190、69.8和4.6 mg·L^(-1),其平均去除率分别达到92%、73%和97%以上。展开更多
Recycling of industrial waste is one of the effective ways to overcome their disposal problem. Ash produced by thermal power plants and lime sludge produced by paper mills require huge disposal land and may create env...Recycling of industrial waste is one of the effective ways to overcome their disposal problem. Ash produced by thermal power plants and lime sludge produced by paper mills require huge disposal land and may create environmental problems such as dusting and leaching of harmful heavy metals. Stabilization of the ash can improve its engineering properties and address the environmental problems. This paper reports the laboratory test results of a Class F pond ash stabilized with lime(2%, 4%, 6% and 8% by weight)alone and in combination with lime sludge(5%, 10% and 15% by weight). The X-ray diffraction(XRD) and scanning electron micrograph(SEM) tests were also performed to identify the possible formation of crystalline phases after stabilization. The effects of lime sludge on the unsoaked and soaked bearing ratios of pond ash with different lime contents, after 7 d, 28 d and 45 d of curing, were observed. Test results indicated that the bearing ratio increased considerably up to a 4% lime content which can be taken as the optimum lime content. Further increase in lime content increased bearing ratio gradually but at a slower rate. The effect of lime sludge was more pronounced at the optimum lime content,particularly at a low curing period. Lime sludge improved the bearing ratio in soaked condition significantly. Leachate analysis of stabilized ash was performed using toxicity characteristic leaching procedure(TCLP-1311) method. The concentrations of toxic elements Zn, Cu, Cd, Ni and Cr in the stabilized mixes were lower than those in the unstabilized waste. The results indicated that the pond ash-lime-lime sludge mixes have potential application as road subbase material.展开更多
基金Supported by the National Natural Science Foundation of China(51208068)~~
文摘An engineering technology for the comprehensive treatments of sewage sludge and mine wastewater in smal town was introduced. As fil ing materials, gangue to fil in the col apse basin, construction waste, household refuse and ex-cess sludge as wel as clay were mixed with water into organic fil ing soil, turning the waste sludge into useful soil matrix, which solved the difficulties in growing plants in the reclaimed land that lack of organic soil. The col apse basin was de-signed into oxidation pond, wetland and land infiltration system to treat industrial wastewater and domestic wastewater, realizing the up-to-standard release after sewage treatment.
文摘针对制革废水高COD、高总氮的问题,提出了基于上流式厌氧污泥床(UASB)、上流式反硝化污泥床(UDNSB)、生物接触氧化池的生物处理组合工艺,进行了为期321 d的现场中试研究。研究结果表明,对于COD、TN、NH_4^+-N平均浓度分别为2 740、278和193 mg·L^(-1)的制革废水,在硝化液回流比R为300%,UASB反应器、UDNSB反应器、生物接触氧化池的水力停留时间(HRT)分别为11、22和57 h,平均容积负荷分别为5.63 kg COD·(m^3·d)^(-1)、0.30 kg TN·(m^3·d)^(-1)和0.11 kg NH+4-N·(m^3·d)^(-1)的条件下,该组合工艺处理出水COD、TN和NH_4^+-N的平均浓度分别为190、69.8和4.6 mg·L^(-1),其平均去除率分别达到92%、73%和97%以上。
文摘Recycling of industrial waste is one of the effective ways to overcome their disposal problem. Ash produced by thermal power plants and lime sludge produced by paper mills require huge disposal land and may create environmental problems such as dusting and leaching of harmful heavy metals. Stabilization of the ash can improve its engineering properties and address the environmental problems. This paper reports the laboratory test results of a Class F pond ash stabilized with lime(2%, 4%, 6% and 8% by weight)alone and in combination with lime sludge(5%, 10% and 15% by weight). The X-ray diffraction(XRD) and scanning electron micrograph(SEM) tests were also performed to identify the possible formation of crystalline phases after stabilization. The effects of lime sludge on the unsoaked and soaked bearing ratios of pond ash with different lime contents, after 7 d, 28 d and 45 d of curing, were observed. Test results indicated that the bearing ratio increased considerably up to a 4% lime content which can be taken as the optimum lime content. Further increase in lime content increased bearing ratio gradually but at a slower rate. The effect of lime sludge was more pronounced at the optimum lime content,particularly at a low curing period. Lime sludge improved the bearing ratio in soaked condition significantly. Leachate analysis of stabilized ash was performed using toxicity characteristic leaching procedure(TCLP-1311) method. The concentrations of toxic elements Zn, Cu, Cd, Ni and Cr in the stabilized mixes were lower than those in the unstabilized waste. The results indicated that the pond ash-lime-lime sludge mixes have potential application as road subbase material.
