Wall slip boundary condition is first introduced into twin-screw extrusion with the Navier slip law. Three-dimensional isothermal flow in the twin-screw extruder is simulated by using the finite element package POLYFL...Wall slip boundary condition is first introduced into twin-screw extrusion with the Navier slip law. Three-dimensional isothermal flow in the twin-screw extruder is simulated by using the finite element package POLYFLOW. Profiles of velocity contours in the screw channel and shear rate distributions in the intermeshing region are presented for different slip coefficients. Curves of axial pressure difference, average shear rate and dispersive mixing index vs. the slip coefficient are plotted and discussed. Comparisons are also made between the wall slip conditions and the non-slip condition. The simulation results indicate that, as the level of wall slip decreases, the axial pressure difference rises, the shear effect is intensified and the axial mixing is also enhanced. All these flow characteristics seem to level off with the increase of the slip coefficient. However, because of the inherent limitation of the Navier slip law, use of an overestimated slip coefficient would predict an over-sticky state between the screw surface and the polymer melt.展开更多
文摘Wall slip boundary condition is first introduced into twin-screw extrusion with the Navier slip law. Three-dimensional isothermal flow in the twin-screw extruder is simulated by using the finite element package POLYFLOW. Profiles of velocity contours in the screw channel and shear rate distributions in the intermeshing region are presented for different slip coefficients. Curves of axial pressure difference, average shear rate and dispersive mixing index vs. the slip coefficient are plotted and discussed. Comparisons are also made between the wall slip conditions and the non-slip condition. The simulation results indicate that, as the level of wall slip decreases, the axial pressure difference rises, the shear effect is intensified and the axial mixing is also enhanced. All these flow characteristics seem to level off with the increase of the slip coefficient. However, because of the inherent limitation of the Navier slip law, use of an overestimated slip coefficient would predict an over-sticky state between the screw surface and the polymer melt.
