This research develops a comprehensive method to solve a combinatorial problem consisting of distribution system reconfiguration, capacitor allocation, and renewable energy resources sizing and siting simultaneously a...This research develops a comprehensive method to solve a combinatorial problem consisting of distribution system reconfiguration, capacitor allocation, and renewable energy resources sizing and siting simultaneously and to improve power system's accountability and system performance parameters. Due to finding solution which is closer to realistic characteristics, load forecasting, market price errors and the uncertainties related to the variable output power of wind based DG units are put in consideration. This work employs NSGA-II accompanied by the fuzzy set theory to solve the aforementioned multi-objective problem. The proposed scheme finally leads to a solution with a minimum voltage deviation, a maximum voltage stability, lower amount of pollutant and lower cost. The cost includes the installation costs of new equipment, reconfiguration costs, power loss cost, reliability cost, cost of energy purchased from power market, upgrade costs of lines and operation and maintenance costs of DGs. Therefore, the proposed methodology improves power quality, reliability and security in lower costs besides its preserve, with the operational indices of power distribution networks in acceptable level. To validate the proposed methodology's usefulness, it was applied on the IEEE 33-bus distribution system then the outcomes were compared with initial configuration.展开更多
Most of the previous studies on the vibration ride comfort of the human-vehicle system were focused only on one or two aspects of the investigation. A hybrid approach which integrates all kinds of investigation method...Most of the previous studies on the vibration ride comfort of the human-vehicle system were focused only on one or two aspects of the investigation. A hybrid approach which integrates all kinds of investigation methods in real environment and virtual environment is described. The real experimental environment includes the WBV（whole body vibration） test, questionnaires for human subjective sensation and motion capture. The virtual experimental environment includes the theoretical calculation on simplified 5-DOF human body vibration model, the vibration simulation and analysis within ADAMS/VibrationTM module, and the digital human biomechanics and occupational health analysis in Jack software. While the real experimental environment provides realistic and accurate test results, it also serves as core and validation for the virtual experimental environment. The virtual experimental environment takes full advantages of current available vibration simulation and digital human modelling software, and makes it possible to evaluate the sitting posture comfort in a human-vehicle system with various human anthropometric parameters. How this digital evaluation system for car seat comfort design is fitted in the Industry 4.0 framework is also proposed.展开更多
Site selection for location of a hospital is one of the crucial policy-related decisions taken by the government. In upper Egypt, the cities suffer from a shortage and bad distribution of hospital site. The selection ...Site selection for location of a hospital is one of the crucial policy-related decisions taken by the government. In upper Egypt, the cities suffer from a shortage and bad distribution of hospital site. The selection of the appropriate hospital site requires consideration of multiple alternative solutions and evaluation factor. We develop a Multi-Criteria Decision Support System (MCDSS) process that combines Geographical Information System (GIS) analysis with Analytical Hierarchy Process (AHP) and use this process to determine the optimum site for a new hospital in the Aswan urban area. Based on actual conditions Aswan city, we used three main factors and seven sub-factors. The main factors are urban, environmental and economic factors. An application adopting AHP process was developed to calculate weights of every factor. Spatial analysis in GIS was used to overlay and generate factors maps and suitability evaluation map. All maps are classified from 1 (low suitable) to 5 (high suitable) using spatial information technologies. The candidate sites are divided by best, good and unsuitable hospital areas. Best hospital site represents optimal sites;good hospital site can be used as back-up candidate sites. The study was found that best area (S3) is about 30%, and most of these are located in the south part of the study area;good area (S2) is about 58%, and most of these are located in the central part of the study area;unsuitable area (S1) is about 12%, and most of these are located in the Eastern and Western parts of the study area. Finally, the study ends with an assessment of proposed sites.展开更多
文摘This research develops a comprehensive method to solve a combinatorial problem consisting of distribution system reconfiguration, capacitor allocation, and renewable energy resources sizing and siting simultaneously and to improve power system's accountability and system performance parameters. Due to finding solution which is closer to realistic characteristics, load forecasting, market price errors and the uncertainties related to the variable output power of wind based DG units are put in consideration. This work employs NSGA-II accompanied by the fuzzy set theory to solve the aforementioned multi-objective problem. The proposed scheme finally leads to a solution with a minimum voltage deviation, a maximum voltage stability, lower amount of pollutant and lower cost. The cost includes the installation costs of new equipment, reconfiguration costs, power loss cost, reliability cost, cost of energy purchased from power market, upgrade costs of lines and operation and maintenance costs of DGs. Therefore, the proposed methodology improves power quality, reliability and security in lower costs besides its preserve, with the operational indices of power distribution networks in acceptable level. To validate the proposed methodology's usefulness, it was applied on the IEEE 33-bus distribution system then the outcomes were compared with initial configuration.
基金Supported by National Natural Science Foundation of China(Grant No.51465056)Xinjiang Provincial Natural Science Foundation of China(Grant No.2015211C265)Xinjiang University Ph D Start-up Funds,China
文摘Most of the previous studies on the vibration ride comfort of the human-vehicle system were focused only on one or two aspects of the investigation. A hybrid approach which integrates all kinds of investigation methods in real environment and virtual environment is described. The real experimental environment includes the WBV（whole body vibration） test, questionnaires for human subjective sensation and motion capture. The virtual experimental environment includes the theoretical calculation on simplified 5-DOF human body vibration model, the vibration simulation and analysis within ADAMS/VibrationTM module, and the digital human biomechanics and occupational health analysis in Jack software. While the real experimental environment provides realistic and accurate test results, it also serves as core and validation for the virtual experimental environment. The virtual experimental environment takes full advantages of current available vibration simulation and digital human modelling software, and makes it possible to evaluate the sitting posture comfort in a human-vehicle system with various human anthropometric parameters. How this digital evaluation system for car seat comfort design is fitted in the Industry 4.0 framework is also proposed.
文摘Site selection for location of a hospital is one of the crucial policy-related decisions taken by the government. In upper Egypt, the cities suffer from a shortage and bad distribution of hospital site. The selection of the appropriate hospital site requires consideration of multiple alternative solutions and evaluation factor. We develop a Multi-Criteria Decision Support System (MCDSS) process that combines Geographical Information System (GIS) analysis with Analytical Hierarchy Process (AHP) and use this process to determine the optimum site for a new hospital in the Aswan urban area. Based on actual conditions Aswan city, we used three main factors and seven sub-factors. The main factors are urban, environmental and economic factors. An application adopting AHP process was developed to calculate weights of every factor. Spatial analysis in GIS was used to overlay and generate factors maps and suitability evaluation map. All maps are classified from 1 (low suitable) to 5 (high suitable) using spatial information technologies. The candidate sites are divided by best, good and unsuitable hospital areas. Best hospital site represents optimal sites;good hospital site can be used as back-up candidate sites. The study was found that best area (S3) is about 30%, and most of these are located in the south part of the study area;good area (S2) is about 58%, and most of these are located in the central part of the study area;unsuitable area (S1) is about 12%, and most of these are located in the Eastern and Western parts of the study area. Finally, the study ends with an assessment of proposed sites.
