Ultrahigh resolution synthetic aperture radar(SAR)imaging for ship targets is significant in SAR imaging,but it suffers from high frequency vibration of the platform,which will induce defocus into SAR imaging results....Ultrahigh resolution synthetic aperture radar(SAR)imaging for ship targets is significant in SAR imaging,but it suffers from high frequency vibration of the platform,which will induce defocus into SAR imaging results.In this paper,a novel compensation method based on the sinusoidal frequency modulation Fourier-Bessel transform(SFMFBT)is proposed,it can estimate the vibration errors,and the phase shift ambiguity can be avoided via extracting the time frequency ridge consequently.By constructing the corresponding compensation function and combined with the inverse SAR(ISAR)technique,well-focused imaging results can be obtained.The simulation imaging results of ship targets demonstrate the validity of the proposed approach.展开更多
In the inverter circuit,there exists a specific on-off time in each power transistor.As such,to prevent a short circuit of the two switch devices on the upper and lower bridge arms,a specific dead time must be set in ...In the inverter circuit,there exists a specific on-off time in each power transistor.As such,to prevent a short circuit of the two switch devices on the upper and lower bridge arms,a specific dead time must be set in the pulse width modulation(PWM)and the sinusoidal pulse width modulation(SPWM)signals.In this paper,an intellectual property(IP)core that can introduce a high-precision dead time of arbitrary length into PWM or SPWM signals of the inverter is designed to increase the precision,convenience and generalization of dead time control,resulting in a boosted control accuracy of up to 10 ns.Moreover,the added Avalon bus enables IP cores to be accessed by the field programmable gate array(FPGA)processor in a standard manner and multiple IP cores of the same class can be easily incorporated.In addition,an application for setting and compensating for dead time in a three-phase inverter based on system on programmable chip(SOPC)technology is presented.With the Nios II CPU as its core,the system adopts the mean voltage compensation method to calculate the compensation voltage,and performs dead-time compensation in a feed-forward manner.The three dead-time IP cores are controlled by Avalon bus.These allow the dead time of three groups of power transistors to be accurately controlled and flexibly adjusted.The system also features the master computer communication function while boasting the advantages of flexible control,high precision and low cost.展开更多
To improve the robustness and performance of the dynamic response of a cage asynchronous motor,a direct torque control(DTC)based on sliding mode control(SMC)is adopted to replace traditional proportional-integral(PI)a...To improve the robustness and performance of the dynamic response of a cage asynchronous motor,a direct torque control(DTC)based on sliding mode control(SMC)is adopted to replace traditional proportional-integral(PI)and hysteresis comparators.The combination of the proposed strategy with sinusoidal pulse width modulation(SPWM)applied to a three-level neutral point clamped(NPC)inverter brings many advantages such as a reduction in harmonics,and precise and rapid tracking of the references.Simulations are performed for a three-level inverter with SM-DTC,a two-level inverter with SM-DTC and the three-level inverter with PI-DTC-SPWM.The results show that the SM-DTC method achieves better performance in terms of reference tracking,while adoption of the threelevel inverter topology can effectively reduce the ripples.Applying the SM-DTC to the three-level inverter presents the best solution for achieving efficient and robust control.In addition,the use of a sliding mode speed estimator eliminates the mechanical sensor and this increases the reliability of the system.展开更多
In this Letter,vortex phase and sinusoidal phase modulations of Hermite-Gaussian beams are studied theoretically and experimentally.The coding method of the experiment is introduced in detail,and the evolution law of ...In this Letter,vortex phase and sinusoidal phase modulations of Hermite-Gaussian beams are studied theoretically and experimentally.The coding method of the experiment is introduced in detail,and the evolution law of focus under different beam order(m,n)and topological charge(l)is given.In order to verify the accuracy of the generation experiment,the optical field distribution under sinusoidal vortex modulation is analyzed deeply.The relevant analysis and methods provided in this Letter have certain practical significance for the development of laser mode analysis,optical communication,and other fields.展开更多
In this paper, we propose a method for characterizing a musical signal by extracting a set of harmonic descriptors reflecting the maximum information contained in this signal. We focus our study on a signal of orienta...In this paper, we propose a method for characterizing a musical signal by extracting a set of harmonic descriptors reflecting the maximum information contained in this signal. We focus our study on a signal of oriental music characterized by its richness in tone that can be extended to 1/4 tone, taking into account the frequency and time characteristics of this type of music. To do so, the original signal is slotted and analyzed on a window of short duration. This signal is viewed as the result of a combined modulation of amplitude and frequency. For this result, we apply short-term the non-stationary sinusoidal modeling technique. In each segment, the signal is represented by a set of sinusoids characterized by their intrinsic parameters: amplitudes, frequencies and phases. The modeling approach adopted is closely related to the slot window;therefore great importance is devoted to the study and the choice of the kind of the window and its width. It must be of variable length in order to get better results in the practical implementation of our method. For this purpose, evaluation tests were carried out by synthesizing the signal from the estimated parameters. Interesting results have been identified concerning the comparison of the synthesized signal with the original signal.展开更多
Sine Non-linear Chirp Keying(SNCK) is a kind of high-efficient modulation scheme, which provides a potential new beamforming method in communication and radar systems. It has been proved to have advantages in some par...Sine Non-linear Chirp Keying(SNCK) is a kind of high-efficient modulation scheme, which provides a potential new beamforming method in communication and radar systems. It has been proved to have advantages in some parameter estimation issues over conventional modulation schemes. In this paper, a novel transform termed as Discrete Sinusoidal Frequency Modulation transform(DSFMT) is proposed. Then, the DSFMT of SNCK signal is deduced and classified into three types, based on which, the time-bandwidth product is estimated by the proposed algorithm. Simulation results show that the noise has a signifi cant impact on the localization of the peak value and the time-bandwidth product can be estimated by using local ratio values when.展开更多
基金supported by the National Natural Science Foundation of China(61871146)the Fundamental Research Funds for the Central Universities(FRFCU5710093720)。
文摘Ultrahigh resolution synthetic aperture radar(SAR)imaging for ship targets is significant in SAR imaging,but it suffers from high frequency vibration of the platform,which will induce defocus into SAR imaging results.In this paper,a novel compensation method based on the sinusoidal frequency modulation Fourier-Bessel transform(SFMFBT)is proposed,it can estimate the vibration errors,and the phase shift ambiguity can be avoided via extracting the time frequency ridge consequently.By constructing the corresponding compensation function and combined with the inverse SAR(ISAR)technique,well-focused imaging results can be obtained.The simulation imaging results of ship targets demonstrate the validity of the proposed approach.
基金Supported by the National Natural Science Foundation of China(61961016)the Natural Science Foundation of Hubei Province(2019CFB593)PhD Research Start-Up Foundation of Hubei Minzu University(MY2018B08)
文摘In the inverter circuit,there exists a specific on-off time in each power transistor.As such,to prevent a short circuit of the two switch devices on the upper and lower bridge arms,a specific dead time must be set in the pulse width modulation(PWM)and the sinusoidal pulse width modulation(SPWM)signals.In this paper,an intellectual property(IP)core that can introduce a high-precision dead time of arbitrary length into PWM or SPWM signals of the inverter is designed to increase the precision,convenience and generalization of dead time control,resulting in a boosted control accuracy of up to 10 ns.Moreover,the added Avalon bus enables IP cores to be accessed by the field programmable gate array(FPGA)processor in a standard manner and multiple IP cores of the same class can be easily incorporated.In addition,an application for setting and compensating for dead time in a three-phase inverter based on system on programmable chip(SOPC)technology is presented.With the Nios II CPU as its core,the system adopts the mean voltage compensation method to calculate the compensation voltage,and performs dead-time compensation in a feed-forward manner.The three dead-time IP cores are controlled by Avalon bus.These allow the dead time of three groups of power transistors to be accurately controlled and flexibly adjusted.The system also features the master computer communication function while boasting the advantages of flexible control,high precision and low cost.
文摘To improve the robustness and performance of the dynamic response of a cage asynchronous motor,a direct torque control(DTC)based on sliding mode control(SMC)is adopted to replace traditional proportional-integral(PI)and hysteresis comparators.The combination of the proposed strategy with sinusoidal pulse width modulation(SPWM)applied to a three-level neutral point clamped(NPC)inverter brings many advantages such as a reduction in harmonics,and precise and rapid tracking of the references.Simulations are performed for a three-level inverter with SM-DTC,a two-level inverter with SM-DTC and the three-level inverter with PI-DTC-SPWM.The results show that the SM-DTC method achieves better performance in terms of reference tracking,while adoption of the threelevel inverter topology can effectively reduce the ripples.Applying the SM-DTC to the three-level inverter presents the best solution for achieving efficient and robust control.In addition,the use of a sliding mode speed estimator eliminates the mechanical sensor and this increases the reliability of the system.
文摘In this Letter,vortex phase and sinusoidal phase modulations of Hermite-Gaussian beams are studied theoretically and experimentally.The coding method of the experiment is introduced in detail,and the evolution law of focus under different beam order(m,n)and topological charge(l)is given.In order to verify the accuracy of the generation experiment,the optical field distribution under sinusoidal vortex modulation is analyzed deeply.The relevant analysis and methods provided in this Letter have certain practical significance for the development of laser mode analysis,optical communication,and other fields.
文摘In this paper, we propose a method for characterizing a musical signal by extracting a set of harmonic descriptors reflecting the maximum information contained in this signal. We focus our study on a signal of oriental music characterized by its richness in tone that can be extended to 1/4 tone, taking into account the frequency and time characteristics of this type of music. To do so, the original signal is slotted and analyzed on a window of short duration. This signal is viewed as the result of a combined modulation of amplitude and frequency. For this result, we apply short-term the non-stationary sinusoidal modeling technique. In each segment, the signal is represented by a set of sinusoids characterized by their intrinsic parameters: amplitudes, frequencies and phases. The modeling approach adopted is closely related to the slot window;therefore great importance is devoted to the study and the choice of the kind of the window and its width. It must be of variable length in order to get better results in the practical implementation of our method. For this purpose, evaluation tests were carried out by synthesizing the signal from the estimated parameters. Interesting results have been identified concerning the comparison of the synthesized signal with the original signal.
基金supported by Science and Technology on Information Transmission and Dissemination in Communication Networks Laboratory(KX152600015/ITD-U15006)National Natural Science Foundation of China(No.61401196)
文摘Sine Non-linear Chirp Keying(SNCK) is a kind of high-efficient modulation scheme, which provides a potential new beamforming method in communication and radar systems. It has been proved to have advantages in some parameter estimation issues over conventional modulation schemes. In this paper, a novel transform termed as Discrete Sinusoidal Frequency Modulation transform(DSFMT) is proposed. Then, the DSFMT of SNCK signal is deduced and classified into three types, based on which, the time-bandwidth product is estimated by the proposed algorithm. Simulation results show that the noise has a signifi cant impact on the localization of the peak value and the time-bandwidth product can be estimated by using local ratio values when.
