Sintering shrinkage, compressive strength, bending strength, metallurgical morphology, microstructure and chemical composition diffusion of hydroxyapatite-316L stainless steel(HA-316L SS) composites were investigated....Sintering shrinkage, compressive strength, bending strength, metallurgical morphology, microstructure and chemical composition diffusion of hydroxyapatite-316L stainless steel(HA-316L SS) composites were investigated. The results show that the sintering shrinkage of HA-316L SS composites decreases from 27.38% to 8.87% for cylinder sample or from 27.18% to 8.62% for cuboid sample with decreasing the volume ratio of HA to 316L SS, which leads to higher sintering activity of HA compared with that of 316L SS. The compressive strength of HA-316L SS composites changes just like parabolic curve (245.3→126.3→202.8 MPa) with reducing the volume ratio of HA to 316L SS. Bending strength increases from 86.3MPa to 124. 2 MPa with increasing the content of 316L SS. Furthermore, comprehensive mechanical properties of 1.0∶3.0 (volume ratio of HA to 316L SS) composite are optimal with compressive strength and bending strength equal to 202.8 MPa and 124.2 MPa, respectively. The (microstructure) and metallurgical structure vary regularly with the volume ratio of HA to 316L SS. Some chemical reaction takes place at the interface of the composites during sintering.展开更多
CaO needs to show high activity to be used as Ca-sorbent and slagging agent. Hydration activity is an important characteristic to evaluate the activity of CaO. In this study, carbide slag from polyvinyl chloride(PVC) ...CaO needs to show high activity to be used as Ca-sorbent and slagging agent. Hydration activity is an important characteristic to evaluate the activity of CaO. In this study, carbide slag from polyvinyl chloride(PVC) industry was utilized as precursor for preparing high activity CaO. The roles of crystallite grain, average pore diameter(APD) and volume fraction of pore b 200 nm in diameter(VF200) in hydration activity of CaO from carbide slag(CS-CaO)were respectively investigated. The hydrolysis kinetics model of CaO shows a three-dimensional spherically symmetric diffusion model(D4), which suggests that hydration activity was mainly associated with APD and VF200 of CS-CaO with limited correlation to the crystal size. Specifically, the hydration activity of CS-CaO is increased with increasing VF200, while decreased with increasing APD. Under the invariable calcination temperature,the core–shell structure formed by the addition of graphite or Ca CO3 to CS effectively inhibits the sintering of CS-CaO and improves VF200. Consequently, the hydration activity of CS-CaO increased from 22.79 ℃·min^-1 to27.19 ℃·min^-1 and to 29.27 ℃·min^-1, with addition of 5% graphite or 5% CaCO3 into carbide slag, respectively.展开更多
With the increase in the international trade of ceramics, improvement in the physical and chemical properties of ceramics has become a market demand in recent years. The addition of nanomaterials in glaze can simultan...With the increase in the international trade of ceramics, improvement in the physical and chemical properties of ceramics has become a market demand in recent years. The addition of nanomaterials in glaze can simultaneously improve the mechanical and corrosion resistance properties of ceramics. In this study, the effect of nano-sized Ag/ZnO in glazed ceramic was investigated considering the hardness, whiteness, and microscopic structures of the products. Results showed that the Ag/ZnO nanocomposite powder significantly affects the performance of glaze. Glaze hardness reached the highest value (96.6 HV) at the low sintering temperature of 1130 ℃ with the addition of 10% Ag/ZnO nanocomposite powder. Furthermore, the Ag/ZnO nanocomposite powder improved crack resistance and whiteness. Ag as AgO and Ag2O in the glaze was effective for antibacterial activity of ceramic. In addition, the Ag/ZnO nanocomposite powder could also promote the shrinkage of bubbles in the glaze layer and smooth the glaze. These results indicated that the nanoparticles could act as an active center for melting raw materials, which is crucial for ceramic properties.展开更多
High-performance solid oxide fuel cell(SOFC) is in urgent need of high-quality electrolyte powders with high reactivity and chemical uniformity.Here,8 mol% Y_(2)O_(3) doped ZrO_(2)(YSZ) nano-powders were synthesized b...High-performance solid oxide fuel cell(SOFC) is in urgent need of high-quality electrolyte powders with high reactivity and chemical uniformity.Here,8 mol% Y_(2)O_(3) doped ZrO_(2)(YSZ) nano-powders were synthesized by an improved solid-state reaction method at ambient temperature,and were applied to the fabrication of SOFC electrolytes.YSZ nano-powders show average grain sizes of ^(2)0 nm and high dispersibility,which is comparable with or even better than some other chemical methods.Benefitting from their high reactivity,dense YSZ electrolytes(relative density of 97.9%) can be obtained at a relatively low sintering temperature of 1400℃.The optimized electrical conductivity reaches up to a high value of0.034 S/cm at 800 0C in air.The anode supported single cell with the construction of Ni-YSZ/YSZ/Sm_(0.2)Ce_(0.8)O_(2-δ)(SDC)/La_(0.6)Sr_(0.4)Co_(0.2)Fe_(0.8)O_(3-δ)(LSCF) exhibits the peak power density of 0.827 W/cm^(2) at800℃ while taking wet H_(2) as fuels and ambient air as oxidants.展开更多
文摘Sintering shrinkage, compressive strength, bending strength, metallurgical morphology, microstructure and chemical composition diffusion of hydroxyapatite-316L stainless steel(HA-316L SS) composites were investigated. The results show that the sintering shrinkage of HA-316L SS composites decreases from 27.38% to 8.87% for cylinder sample or from 27.18% to 8.62% for cuboid sample with decreasing the volume ratio of HA to 316L SS, which leads to higher sintering activity of HA compared with that of 316L SS. The compressive strength of HA-316L SS composites changes just like parabolic curve (245.3→126.3→202.8 MPa) with reducing the volume ratio of HA to 316L SS. Bending strength increases from 86.3MPa to 124. 2 MPa with increasing the content of 316L SS. Furthermore, comprehensive mechanical properties of 1.0∶3.0 (volume ratio of HA to 316L SS) composite are optimal with compressive strength and bending strength equal to 202.8 MPa and 124.2 MPa, respectively. The (microstructure) and metallurgical structure vary regularly with the volume ratio of HA to 316L SS. Some chemical reaction takes place at the interface of the composites during sintering.
基金Supported by the National Natural Science Foundation of China(U1610101,51422405).
文摘CaO needs to show high activity to be used as Ca-sorbent and slagging agent. Hydration activity is an important characteristic to evaluate the activity of CaO. In this study, carbide slag from polyvinyl chloride(PVC) industry was utilized as precursor for preparing high activity CaO. The roles of crystallite grain, average pore diameter(APD) and volume fraction of pore b 200 nm in diameter(VF200) in hydration activity of CaO from carbide slag(CS-CaO)were respectively investigated. The hydrolysis kinetics model of CaO shows a three-dimensional spherically symmetric diffusion model(D4), which suggests that hydration activity was mainly associated with APD and VF200 of CS-CaO with limited correlation to the crystal size. Specifically, the hydration activity of CS-CaO is increased with increasing VF200, while decreased with increasing APD. Under the invariable calcination temperature,the core–shell structure formed by the addition of graphite or Ca CO3 to CS effectively inhibits the sintering of CS-CaO and improves VF200. Consequently, the hydration activity of CS-CaO increased from 22.79 ℃·min^-1 to27.19 ℃·min^-1 and to 29.27 ℃·min^-1, with addition of 5% graphite or 5% CaCO3 into carbide slag, respectively.
文摘With the increase in the international trade of ceramics, improvement in the physical and chemical properties of ceramics has become a market demand in recent years. The addition of nanomaterials in glaze can simultaneously improve the mechanical and corrosion resistance properties of ceramics. In this study, the effect of nano-sized Ag/ZnO in glazed ceramic was investigated considering the hardness, whiteness, and microscopic structures of the products. Results showed that the Ag/ZnO nanocomposite powder significantly affects the performance of glaze. Glaze hardness reached the highest value (96.6 HV) at the low sintering temperature of 1130 ℃ with the addition of 10% Ag/ZnO nanocomposite powder. Furthermore, the Ag/ZnO nanocomposite powder improved crack resistance and whiteness. Ag as AgO and Ag2O in the glaze was effective for antibacterial activity of ceramic. In addition, the Ag/ZnO nanocomposite powder could also promote the shrinkage of bubbles in the glaze layer and smooth the glaze. These results indicated that the nanoparticles could act as an active center for melting raw materials, which is crucial for ceramic properties.
基金supported by the Natural Science Foundation of Shandong Province (ZR2020KE033,ZR2020ME051,ZR2019BEM013,ZR2021ME253)the Shandong Science and Technology Program (2021TSGC1122)+1 种基金the Shandong Postdoctoral Innovation Foundation (201903069)the Zibo Key Research and Development Project (2021SNPT0004,2021SNCG0076)。
文摘High-performance solid oxide fuel cell(SOFC) is in urgent need of high-quality electrolyte powders with high reactivity and chemical uniformity.Here,8 mol% Y_(2)O_(3) doped ZrO_(2)(YSZ) nano-powders were synthesized by an improved solid-state reaction method at ambient temperature,and were applied to the fabrication of SOFC electrolytes.YSZ nano-powders show average grain sizes of ^(2)0 nm and high dispersibility,which is comparable with or even better than some other chemical methods.Benefitting from their high reactivity,dense YSZ electrolytes(relative density of 97.9%) can be obtained at a relatively low sintering temperature of 1400℃.The optimized electrical conductivity reaches up to a high value of0.034 S/cm at 800 0C in air.The anode supported single cell with the construction of Ni-YSZ/YSZ/Sm_(0.2)Ce_(0.8)O_(2-δ)(SDC)/La_(0.6)Sr_(0.4)Co_(0.2)Fe_(0.8)O_(3-δ)(LSCF) exhibits the peak power density of 0.827 W/cm^(2) at800℃ while taking wet H_(2) as fuels and ambient air as oxidants.
