Microcavity lasers based on erbium-doped lithium niobate on insulator(LNOI),which are key devices for LNOI integrated photonics,have attracted significant attention recently.In this study,we report the realization of ...Microcavity lasers based on erbium-doped lithium niobate on insulator(LNOI),which are key devices for LNOI integrated photonics,have attracted significant attention recently.In this study,we report the realization of a C-band single-mode laser using the Vernier effect in two coupled erbium-doped LNOI microrings with different radii under the pump of a 980-nm continuous laser.The laser,operating stably over a large range of pumping power,has a pump threshold of about 200μW and a side-mode suppression ratio exceeding 26 dB.The high-performance LNOI single-mode laser will promote the development of lithium niobate integrated photonics.展开更多
Laser displays,benefiting from the characteristic merits of lasers,have led to the revolution of next-generation display technologies owing to their superior color expression.However,the acquisition of pixelated laser...Laser displays,benefiting from the characteristic merits of lasers,have led to the revolution of next-generation display technologies owing to their superior color expression.However,the acquisition of pixelated laser arrays as self-emissive panels for flat-panel laser displays remains challenging.Liquid crystal(LC)materials with excellent processability and optoelectronic properties offer considerable potential for the construction of highly ordered multicolor laser arrays.Here,we demonstrate flat-panel laser displays on LC microlaser pixel arrays through a microtemplate-assisted inkjet printing method.Individual organic red-green-blue(RGB)microlaser pixel arrays were obtained by doping dyes into LCs with photonic band edges to obtain single-mode RGB lasing,leading to a much broader color gamut,compared with the standard RGB color space.Then we acquired periodically patterned RGB pixel matrices by positioning LC microlasers precisely into highly ordered arrays,according to the well-organized geometry of the microtemplates.Subsequently,we demonstrated full-color flat-panel laser displays using the LC microlaser pixel matrices as self-emissive panels.These results provide valuable enlightenment for the construction of next-generation flat-panel laser display devices.展开更多
We numerically investigate the effects of nonlinear time-delay on the stochastic system. With the delay time increasing, it is found that the peak of probability distribution in low steady states is decreased, and the...We numerically investigate the effects of nonlinear time-delay on the stochastic system. With the delay time increasing, it is found that the peak of probability distribution in low steady states is decreased, and the peak of probability distribution in high steady states is increased. The mean of state variable, the normalized variance, and the normalized autocorrelation function which quantifies the concentrated degree are slowly varied for small delay time. However, the mean of state variable is rapidly increased, and the normalized variance and the normalized autocorrelation function is rapidly decreased for large delay time.展开更多
A single-mode laser with coupling between additive and multiplicative noise terms is investigated when the multiplicative noise and the coupling between two noise terms are colored fluctuations with finite correlation...A single-mode laser with coupling between additive and multiplicative noise terms is investigated when the multiplicative noise and the coupling between two noise terms are colored fluctuations with finite correlation times T1 and T2. Combining the unified colored noise approximation （UCNA） and the functional analysis, the stationary probability distribution （SPD） and the variance of the laser intensity is derived. It is found that the colored nature of multiplicative noise and the coupling strength between two noise terms can affect both the structure and the height of the SPD, while the colored nature of the coupling between two noise terms can only affect the height of the SPD. The multiplicative noise can enhance the intensity fluctuations while the additive noise can reduce the fluctuations in a laser system. Numerical simulations are presented and consistent to the analytical results.展开更多
Lead halide perovskites have attracted considerable attention as potential candidates for high-performance nano/microlasers,owing to their outstanding optical properties.However,the further development of perovskite m...Lead halide perovskites have attracted considerable attention as potential candidates for high-performance nano/microlasers,owing to their outstanding optical properties.However,the further development of perovskite microlaser arrays(especially based on polycrystalline thin films)produced by the conventional processing techniques is hindered by the chemical instability and surface roughness of the perovskite structures.Herein,we demonstrate a laser patterning of large-scale,highly crystalline perovskite single-crystal films to fabricate reproducible perovskite single-crystal-based microlaser arrays.Perovskite thin films were directly ablated by femtosecond-laser in multiple low-power cycles at a minimum machining line width of approximately 300 nm to realize high-precision,chemically clean,and repeatable fabrication of microdisk arrays.The surface impurities generated during the process can be washed away to avoid external optical loss due to the robustness of the single-crystal film.Moreover,the high-quality,large-sized perovskite single-crystal films can significantly improve the quality of microcavities,thereby realizing a perovskite microdisk laser with narrow linewidth(0.09 nm)and low threshold(5.1µJ/cm2).Benefiting from the novel laser patterning method and the large-sized perovskite single-crystal films,a high power and high color purity laser display with single-mode microlasers as pixels was successfully fabricated.Thus,this study may offer a potential platform for mass-scale and reproducible fabrication of microlaser arrays,and further facilitate the development of highly integrated applications based on perovskite materials.展开更多
The mode-area scaling properties of helical-core optical fibres are numerically studied and the limit of core size for achievable single-mode operation is explored. By appropriate design, helical-core fibres can opera...The mode-area scaling properties of helical-core optical fibres are numerically studied and the limit of core size for achievable single-mode operation is explored. By appropriate design, helical-core fibres can operate in a single mode with possible scaling up to 300μm in core diameter with numerical aperture 0.1.展开更多
基金the National Key Research and Development Program of China(Grant No.2019YFA0705000)the National Natural Science Foundation of China(Grant Nos.12034010,11734009,92050111,12074199,92050114,12004197,and 1774182)the 111 Project(Grant No.B07013).
文摘Microcavity lasers based on erbium-doped lithium niobate on insulator(LNOI),which are key devices for LNOI integrated photonics,have attracted significant attention recently.In this study,we report the realization of a C-band single-mode laser using the Vernier effect in two coupled erbium-doped LNOI microrings with different radii under the pump of a 980-nm continuous laser.The laser,operating stably over a large range of pumping power,has a pump threshold of about 200μW and a side-mode suppression ratio exceeding 26 dB.The high-performance LNOI single-mode laser will promote the development of lithium niobate integrated photonics.
基金supported financially by the Ministry of Science and Technology of China(no.2017YFA0204502)the National Natural Science Foundation of China(grant nos.21533013 and 21790364).
文摘Laser displays,benefiting from the characteristic merits of lasers,have led to the revolution of next-generation display technologies owing to their superior color expression.However,the acquisition of pixelated laser arrays as self-emissive panels for flat-panel laser displays remains challenging.Liquid crystal(LC)materials with excellent processability and optoelectronic properties offer considerable potential for the construction of highly ordered multicolor laser arrays.Here,we demonstrate flat-panel laser displays on LC microlaser pixel arrays through a microtemplate-assisted inkjet printing method.Individual organic red-green-blue(RGB)microlaser pixel arrays were obtained by doping dyes into LCs with photonic band edges to obtain single-mode RGB lasing,leading to a much broader color gamut,compared with the standard RGB color space.Then we acquired periodically patterned RGB pixel matrices by positioning LC microlasers precisely into highly ordered arrays,according to the well-organized geometry of the microtemplates.Subsequently,we demonstrated full-color flat-panel laser displays using the LC microlaser pixel matrices as self-emissive panels.These results provide valuable enlightenment for the construction of next-generation flat-panel laser display devices.
基金Supported by the National Natural Science Foundation of China under Grant Nos 10575041 and 90303007, and the SRFDP of the Ministry of Education of China under Project No 20040511005.
文摘We numerically investigate the effects of nonlinear time-delay on the stochastic system. With the delay time increasing, it is found that the peak of probability distribution in low steady states is decreased, and the peak of probability distribution in high steady states is increased. The mean of state variable, the normalized variance, and the normalized autocorrelation function which quantifies the concentrated degree are slowly varied for small delay time. However, the mean of state variable is rapidly increased, and the normalized variance and the normalized autocorrelation function is rapidly decreased for large delay time.
基金The project supported by National Natural Science Foundation of China under Grant No. 10547130 and Natural Science Foundation of Jiangsu Province of China under Grant No. BK2001138
文摘A single-mode laser with coupling between additive and multiplicative noise terms is investigated when the multiplicative noise and the coupling between two noise terms are colored fluctuations with finite correlation times T1 and T2. Combining the unified colored noise approximation （UCNA） and the functional analysis, the stationary probability distribution （SPD） and the variance of the laser intensity is derived. It is found that the colored nature of multiplicative noise and the coupling strength between two noise terms can affect both the structure and the height of the SPD, while the colored nature of the coupling between two noise terms can only affect the height of the SPD. The multiplicative noise can enhance the intensity fluctuations while the additive noise can reduce the fluctuations in a laser system. Numerical simulations are presented and consistent to the analytical results.
基金the support from the National Natural Science Foundation of China (No. 61925506)the Natural Science Foundation of Shanghai (No. 20JC1414605)+1 种基金Hangzhou Science and Technology Bureau of Zhejiang Province (No. TD2020002)the Academic/Technology Research Leader Program of Shanghai (23XD1404500)
文摘Lead halide perovskites have attracted considerable attention as potential candidates for high-performance nano/microlasers,owing to their outstanding optical properties.However,the further development of perovskite microlaser arrays(especially based on polycrystalline thin films)produced by the conventional processing techniques is hindered by the chemical instability and surface roughness of the perovskite structures.Herein,we demonstrate a laser patterning of large-scale,highly crystalline perovskite single-crystal films to fabricate reproducible perovskite single-crystal-based microlaser arrays.Perovskite thin films were directly ablated by femtosecond-laser in multiple low-power cycles at a minimum machining line width of approximately 300 nm to realize high-precision,chemically clean,and repeatable fabrication of microdisk arrays.The surface impurities generated during the process can be washed away to avoid external optical loss due to the robustness of the single-crystal film.Moreover,the high-quality,large-sized perovskite single-crystal films can significantly improve the quality of microcavities,thereby realizing a perovskite microdisk laser with narrow linewidth(0.09 nm)and low threshold(5.1µJ/cm2).Benefiting from the novel laser patterning method and the large-sized perovskite single-crystal films,a high power and high color purity laser display with single-mode microlasers as pixels was successfully fabricated.Thus,this study may offer a potential platform for mass-scale and reproducible fabrication of microlaser arrays,and further facilitate the development of highly integrated applications based on perovskite materials.
基金Supported by the National Natural Science Foundation of China under Grant Nos 10576012 and 60538010.
文摘The mode-area scaling properties of helical-core optical fibres are numerically studied and the limit of core size for achievable single-mode operation is explored. By appropriate design, helical-core fibres can operate in a single mode with possible scaling up to 300μm in core diameter with numerical aperture 0.1.
