针对高温高压气井完井油管柱密封完整性问题,开展了基于88.90 mm×6.45 mm 110SS材料油管一种气密封特殊螺纹密封完整性分析的管柱三轴设计系数研究,研究中采用了API RP 5C52017国际标准螺纹性能试验评价方法,进行了高温和室温环境...针对高温高压气井完井油管柱密封完整性问题,开展了基于88.90 mm×6.45 mm 110SS材料油管一种气密封特殊螺纹密封完整性分析的管柱三轴设计系数研究,研究中采用了API RP 5C52017国际标准螺纹性能试验评价方法,进行了高温和室温环境下A系全包络线载荷密封实验评价。基于气密封能判据,采用有限元模拟分析了不同VME(冯米塞斯等效应力)全包络线载荷2次循环工况的密封能和密封能倍数的变化规律并确定了危险载荷点。结果表明,通过API标准密封完整性实验评价的气密封特殊螺纹连接,需采用有限元进一步分析包络线载荷循环密封能及密封能倍数的变化规律,确定这种螺纹连接安全适用范围;同时开展了3种VME全包络线载荷2次循环后密封适用性分析,确定了高温和室温两种环境下螺纹安全适用包络线载荷范围及合理的三轴安全系数,并完成了1口高温高压气井完井油管柱安全分析和现场应用。提出的研究方法为管柱三轴设计安全系数的确定提供了有益指导。展开更多
This paper provides innovative and effective instruments for the simplified analysis of serviceability limit states for pitched, kinked, and tapered GLT beams. Specifically, formulas for the evaluation of maximal hori...This paper provides innovative and effective instruments for the simplified analysis of serviceability limit states for pitched, kinked, and tapered GLT beams. Specifically, formulas for the evaluation of maximal horizontal and vertical displacements are derived from a recently-proposed Timoshenko-like non-prismatic beam model. Thereafter, the paper compares the proposed serviceability analysis formulas with other ones available in literature and with highly-refined 2D FE simulations in order to demonstrate the effectiveness of the proposed instruments. The proposed formulas lead to estimations that lie mainly on the conservative side and the errors are smaller than 10% (exceptionally up to 15%) in almost all of the cases of interest for practitioners. Conversely, the accuracy of the proposed formulas decreases for thick and highly-tapered beams since the beam model behind the proposed formulas cannot tackle local effects (like stress concentrations occurring at bearing and beam apex) that significantly influence the beam behavior for such geometries. Finally, the proposed formulas are more accurate than the ones available in literature since the latter ones often provide non-conservative estimations and errors greater than 20% (up to 120%).展开更多
文摘针对高温高压气井完井油管柱密封完整性问题,开展了基于88.90 mm×6.45 mm 110SS材料油管一种气密封特殊螺纹密封完整性分析的管柱三轴设计系数研究,研究中采用了API RP 5C52017国际标准螺纹性能试验评价方法,进行了高温和室温环境下A系全包络线载荷密封实验评价。基于气密封能判据,采用有限元模拟分析了不同VME(冯米塞斯等效应力)全包络线载荷2次循环工况的密封能和密封能倍数的变化规律并确定了危险载荷点。结果表明,通过API标准密封完整性实验评价的气密封特殊螺纹连接,需采用有限元进一步分析包络线载荷循环密封能及密封能倍数的变化规律,确定这种螺纹连接安全适用范围;同时开展了3种VME全包络线载荷2次循环后密封适用性分析,确定了高温和室温两种环境下螺纹安全适用包络线载荷范围及合理的三轴安全系数,并完成了1口高温高压气井完井油管柱安全分析和现场应用。提出的研究方法为管柱三轴设计安全系数的确定提供了有益指导。
文摘This paper provides innovative and effective instruments for the simplified analysis of serviceability limit states for pitched, kinked, and tapered GLT beams. Specifically, formulas for the evaluation of maximal horizontal and vertical displacements are derived from a recently-proposed Timoshenko-like non-prismatic beam model. Thereafter, the paper compares the proposed serviceability analysis formulas with other ones available in literature and with highly-refined 2D FE simulations in order to demonstrate the effectiveness of the proposed instruments. The proposed formulas lead to estimations that lie mainly on the conservative side and the errors are smaller than 10% (exceptionally up to 15%) in almost all of the cases of interest for practitioners. Conversely, the accuracy of the proposed formulas decreases for thick and highly-tapered beams since the beam model behind the proposed formulas cannot tackle local effects (like stress concentrations occurring at bearing and beam apex) that significantly influence the beam behavior for such geometries. Finally, the proposed formulas are more accurate than the ones available in literature since the latter ones often provide non-conservative estimations and errors greater than 20% (up to 120%).
