铝合金中通常含有一些时效析出相及杂质相等第二相粒子,这些第二相粒子对铝合金局部腐蚀行为产生重大影响。概括了析出相θ(Al_2Cu)、η(MgZn_2)、β(Mg_3Al_2)及含 Fe 杂质相 FeAl_3等在铝合金局部腐蚀中的作用机制,重点介绍了 S 相(Al...铝合金中通常含有一些时效析出相及杂质相等第二相粒子,这些第二相粒子对铝合金局部腐蚀行为产生重大影响。概括了析出相θ(Al_2Cu)、η(MgZn_2)、β(Mg_3Al_2)及含 Fe 杂质相 FeAl_3等在铝合金局部腐蚀中的作用机制,重点介绍了 S 相(Al_2CuMg)和 T1相(Al_2CuLi)对铝合金局部腐蚀作用机制的不同观点。展开更多
A series of thermodynamics experiments were used to optimize the hot forging process of 20SiMn low-carbon alloy steel. A dynamic recrystallization and grain growth model was developed for the 20SiMn steel for common p...A series of thermodynamics experiments were used to optimize the hot forging process of 20SiMn low-carbon alloy steel. A dynamic recrystallization and grain growth model was developed for the 20SiMn steel for common production conditions of heavy forgings by doing a nonlinear curve fit of the experiment data. Optimized forging parameters were developed based on the control of the dynamic recrystallization and the MnS secondary phase. The data shows that the initial grain size and the MnS secondary phase all affect the behavior of the 20SiMn dynamic recrystallization and grain growth.展开更多
The effects of different elements including Al,Sn and Zn with ability of solution hardening on corrosion behavior of a Mg alloy have been studied.The microstructure was analyzed and the electrochemical and immersion t...The effects of different elements including Al,Sn and Zn with ability of solution hardening on corrosion behavior of a Mg alloy have been studied.The microstructure was analyzed and the electrochemical and immersion techniques were used for corrosion studies.Scanning kelvin probe force microscopy(SKPFM)was utilized to analyze the volta-potential distribution on the surface.It was found that all additives reduced the corrosion resistance;however,Zn decreased the corrosion resistance less than Al and Sn.The corrosion rate was quantitatively explained through volta-potential difference and the second phase fraction.展开更多
Fully dense aluminum nitride(AIN) ceramics were synthesized by self-propagating high-temperature synthesis(SHS) method using AIN powder as raw material with Y2O3additive. The sintering behavior was studied at differen...Fully dense aluminum nitride(AIN) ceramics were synthesized by self-propagating high-temperature synthesis(SHS) method using AIN powder as raw material with Y2O3additive. The sintering behavior was studied at different sintering temperatures and additive contents. The change of phase compositions, secondary phase distributions and grain morphologies during sintering process were investigated. It is shown that fully dense ceramics using AIN powder prepared by SHS method can be obtained when the sintering temperature is above 1830 ℃. Both Y2O3content and sintering temperature have an important influence on the formation of Y-Al-O phase and grain shape. When Y2O3content is identified, the grain morphology converts from polyhedron into sphere-like shape with the rise of sintering temperature. At a certain sintering temperature,the grain size decreases with the increase in Y2O3content. The influencing mechanisms of different YAl-O secondary phases and sintering temperatures on the grain size and morphology were also discussed based on the experimental results.展开更多
The oxide dispersion strengthened(ODS) steel with the nominal composition of Fe–14 Cr–2 W–0.3 Ti–0.2 V–0.07 Ta–0.3 Y2O3(wt%) was fabricated by mechanical alloying and hot isostatic pressing(HIP). In order to opt...The oxide dispersion strengthened(ODS) steel with the nominal composition of Fe–14 Cr–2 W–0.3 Ti–0.2 V–0.07 Ta–0.3 Y2O3(wt%) was fabricated by mechanical alloying and hot isostatic pressing(HIP). In order to optimize the relative volume fraction of secondary phases, the as-HIPed ODS steel was annealed at 800°C, 1000°C, 1200°C for 5 h, respectively. The microstructures and different secondary phases of the as-HIPed and annealed ODS samples were identified by scanning electron microscopy(SEM), transmission electron microscopy(TEM), and X-ray diffraction(XRD). The tensile properties of all the ODS steels at room temperature were also investigated. The results indicate that annealing is an effective way to control the microstructure and the integral secondary phases. The annealing process promotes the dissolution of M23C6 particles, thus promoting the precipitation of TiC.No obvious coarsening of Y2Ti2O7 nanoparticles can be observed during annealing. The tensile results indicate that the annealed ODS sample with the optimized secondary phases and high density possesses the best mechanical properties.展开更多
Grains with size of 4.5—20.5μm were studied for their corrosion behavior and electrochemical performance in a Mg-3 Al-5 Pb-1 Ga-Y sacrificial anode using immersion testing,electrochemical measurements and microstruc...Grains with size of 4.5—20.5μm were studied for their corrosion behavior and electrochemical performance in a Mg-3 Al-5 Pb-1 Ga-Y sacrificial anode using immersion testing,electrochemical measurements and microstructure analysis.The results show that fine-grained microstructure has higher chemical activity and more negative discharge potentials than coarse-grained samples.The sample with the smallest average grain size of 4.5μm exhibits corrosion current density of 7.473×10-5 A/cm2,and work potentials of-1.721 V at current density of 10 mA/cm2.The density of grain boundaries and LAGBs increases with grain refinement,which leads to higher rates of dissolution and diffusion for the atoms.The secondary phases promote the occurrence of corrosion and improve the chemical activity of alloy due to their higher potential than the substrate.Higher corrosion rate and discharge activity are directly attributed to the higher density of grain boundaries and LAGBs,as well as the secondary phase.展开更多
文摘铝合金中通常含有一些时效析出相及杂质相等第二相粒子,这些第二相粒子对铝合金局部腐蚀行为产生重大影响。概括了析出相θ(Al_2Cu)、η(MgZn_2)、β(Mg_3Al_2)及含 Fe 杂质相 FeAl_3等在铝合金局部腐蚀中的作用机制,重点介绍了 S 相(Al_2CuMg)和 T1相(Al_2CuLi)对铝合金局部腐蚀作用机制的不同观点。
基金the Key Technologies Research and Development Program of the Eleventh Five-Year Plan of China (No. 2006BAF02B07)
文摘A series of thermodynamics experiments were used to optimize the hot forging process of 20SiMn low-carbon alloy steel. A dynamic recrystallization and grain growth model was developed for the 20SiMn steel for common production conditions of heavy forgings by doing a nonlinear curve fit of the experiment data. Optimized forging parameters were developed based on the control of the dynamic recrystallization and the MnS secondary phase. The data shows that the initial grain size and the MnS secondary phase all affect the behavior of the 20SiMn dynamic recrystallization and grain growth.
基金This work was supported by the National Research Foun-dation grant(2015R1A2A1A01006795)funded by the Ministry of Science and ICT of Korea through the Research Insti-tute of Advanced Materials and Magnesium Technology In-novation Center.
文摘The effects of different elements including Al,Sn and Zn with ability of solution hardening on corrosion behavior of a Mg alloy have been studied.The microstructure was analyzed and the electrochemical and immersion techniques were used for corrosion studies.Scanning kelvin probe force microscopy(SKPFM)was utilized to analyze the volta-potential distribution on the surface.It was found that all additives reduced the corrosion resistance;however,Zn decreased the corrosion resistance less than Al and Sn.The corrosion rate was quantitatively explained through volta-potential difference and the second phase fraction.
基金financially supported by the International Cooperation Project of Zhejiang Province (No. 2012C24007)
文摘Fully dense aluminum nitride(AIN) ceramics were synthesized by self-propagating high-temperature synthesis(SHS) method using AIN powder as raw material with Y2O3additive. The sintering behavior was studied at different sintering temperatures and additive contents. The change of phase compositions, secondary phase distributions and grain morphologies during sintering process were investigated. It is shown that fully dense ceramics using AIN powder prepared by SHS method can be obtained when the sintering temperature is above 1830 ℃. Both Y2O3content and sintering temperature have an important influence on the formation of Y-Al-O phase and grain shape. When Y2O3content is identified, the grain morphology converts from polyhedron into sphere-like shape with the rise of sintering temperature. At a certain sintering temperature,the grain size decreases with the increase in Y2O3content. The influencing mechanisms of different YAl-O secondary phases and sintering temperatures on the grain size and morphology were also discussed based on the experimental results.
基金the National Natural Science Foundation of China(Grant Nos.51325401,51474156 and U1660201)the National Magnetic Confinement Fusion Energy Research Project(granted No.2014GB125006)for grant and financial support
文摘The oxide dispersion strengthened(ODS) steel with the nominal composition of Fe–14 Cr–2 W–0.3 Ti–0.2 V–0.07 Ta–0.3 Y2O3(wt%) was fabricated by mechanical alloying and hot isostatic pressing(HIP). In order to optimize the relative volume fraction of secondary phases, the as-HIPed ODS steel was annealed at 800°C, 1000°C, 1200°C for 5 h, respectively. The microstructures and different secondary phases of the as-HIPed and annealed ODS samples were identified by scanning electron microscopy(SEM), transmission electron microscopy(TEM), and X-ray diffraction(XRD). The tensile properties of all the ODS steels at room temperature were also investigated. The results indicate that annealing is an effective way to control the microstructure and the integral secondary phases. The annealing process promotes the dissolution of M23C6 particles, thus promoting the precipitation of TiC.No obvious coarsening of Y2Ti2O7 nanoparticles can be observed during annealing. The tensile results indicate that the annealed ODS sample with the optimized secondary phases and high density possesses the best mechanical properties.
基金Project supported by the 2011 Program of the Ministry of Education in China(043010100,51701039)
文摘Grains with size of 4.5—20.5μm were studied for their corrosion behavior and electrochemical performance in a Mg-3 Al-5 Pb-1 Ga-Y sacrificial anode using immersion testing,electrochemical measurements and microstructure analysis.The results show that fine-grained microstructure has higher chemical activity and more negative discharge potentials than coarse-grained samples.The sample with the smallest average grain size of 4.5μm exhibits corrosion current density of 7.473×10-5 A/cm2,and work potentials of-1.721 V at current density of 10 mA/cm2.The density of grain boundaries and LAGBs increases with grain refinement,which leads to higher rates of dissolution and diffusion for the atoms.The secondary phases promote the occurrence of corrosion and improve the chemical activity of alloy due to their higher potential than the substrate.Higher corrosion rate and discharge activity are directly attributed to the higher density of grain boundaries and LAGBs,as well as the secondary phase.
