Aiming at improving the performance/cost ratio in grain boundary diffusion process(GBDP),the critical RE containing Pr-Al-Cu alloy,less expensive RE containing La-Al-Cu alloy and non-RE Al-Cu alloy were employed as th...Aiming at improving the performance/cost ratio in grain boundary diffusion process(GBDP),the critical RE containing Pr-Al-Cu alloy,less expensive RE containing La-Al-Cu alloy and non-RE Al-Cu alloy were employed as the diffusion sources.The preliminary results show that the coercivity was successfully enhanced from 1000 kA/m to 1695,1156 and 1125 kA/m by Pr70Al20Cu10,La70Al20Cu10 and Al75Cu25(at.%) alloys diffusion,respectively,due to the formation of(Nd,Pr)-Fe-B,La2 O3 and c-Nd2 O3 phases respectively,after diffusion.It is also found that the corrosion resistance can be improved by Al-Cu diffusion due to the positive effects of Al and Cu elements in grain boundary.The present results demonstrated the various coercivity enhancement mechanisms for the GBDP based on different diffusion sources,and provided feasible solutions for cost reduction of GBDP and NdFeB production by saving RE resource.展开更多
Al2O3-SiC composite was synthesized with pyrophyllite and natural graphite as raw materials by carbothermal reduction reaction under argon atmosphere. The effect of synthesis temperature on phase composition and micro...Al2O3-SiC composite was synthesized with pyrophyllite and natural graphite as raw materials by carbothermal reduction reaction under argon atmosphere. The effect of synthesis temperature on phase composition and microstructure was investigated. Low-carbon MgO-C refractories were prepared by using the synthesized Al2O3-SiC composite as additive. The effect of its addition on the slag penetration and corrosion resistance as well as oxidation resistance of the refractories was investigated, and the slag resistance and oxidation resistance mechanisms of the Al2O3-SiC composite were also discussed. The results show that the synthesis temperature has a great influence on preparation of Al2O3-SiC composite. The Al2O3-SiC composite can be synthesized at 1873-1973 K under argon atmosphere, with pyrophyllite and natural graphite as raw materials, and particle sizes of the composite synthesized at 1973 K are mainly distributed as 1-2 μm. The slag penetration and corrosion resistance of low-carbon M80-C refractories can be remarkably improved by adding the synthesized Al2O3-SiC composite, and the oxidation resistance has an improvement to some extent. The increase of slag viscosity and the formation of MgAl2O4 can effectively inhibit the slag penetration and corrosion for the refractories.展开更多
In this study,a MnOx@TiO2 core‐shell catalyst prepared by a two‐step method was used for the low‐temperature selective catalytic reduction of NOx with NH3.The catalyst exhibits high activity,high stability,and exce...In this study,a MnOx@TiO2 core‐shell catalyst prepared by a two‐step method was used for the low‐temperature selective catalytic reduction of NOx with NH3.The catalyst exhibits high activity,high stability,and excellent N2 selectivity.Furthermore,it displays better SO2 and H2O tolerance than its MnOx,TiO2,and MnOx/TiO2 counterparts.The prepared catalyst was characterized systematically by transmission electron microscopy,high‐resolution transmission electron microscopy,X‐ray diffraction,Raman,BET,X‐ray photoelectron spectroscopy,NH3 temperature‐programmed desorption and H2 temperature‐programmed reduction analyses.The optimized MnOx@TiO2 catalyst exhibits an obvious core‐shell structure,where the TiO2 shell is evenly distributed over the MnOx nanorod core.The catalyst also presents abundant mesopores,Lewis‐acid sites,and high redox capability,all of which enhance its catalytic performance.According to the XPS results,the decrease in the number of Mn4+active centers after SO2 poisoning is significantly lower in MnOx@TiO2 than in MnOx/TiO2.The core‐shell structure is hence able to protect the catalytic active sites from H2O and SO2 poisoning.展开更多
The selective catalytic reduction(SCR)of NO_(x) by NH3 is one of the most mature technologies for NO_(x) treatment.Catalysts are the main factors affecting denitrification efficiency.Zeolites as low-tempe rature NH3-S...The selective catalytic reduction(SCR)of NO_(x) by NH3 is one of the most mature technologies for NO_(x) treatment.Catalysts are the main factors affecting denitrification efficiency.Zeolites as low-tempe rature NH3-SCR catalysts have been extensively studied in the past few years.In this work,the mechanism of zeolites for NH3-SCR reaction was reviewed and the denitrification performances of zeolite catalysts prepared by different methods were compared.The effects of sulfur and water poisoning on zeolite catalysts in NH3-SCR reaction were also analyzed.Several ways to address the problems in lowtemperature NH3-SCR reaction were discussed.Hopefully,this review could provide a fundamental understanding of SCR reaction on zeolite catalysts and pave the way toward similar studies to realize its commercial applications.展开更多
The selective catalytic reduction （SCR） of NOx with NH3 has been proven to be an efficient technology for NOx conversion to N2. However, the catalysts used for SCR usually suffer from the problem of sulfur poisoning...The selective catalytic reduction （SCR） of NOx with NH3 has been proven to be an efficient technology for NOx conversion to N2. However, the catalysts used for SCR usually suffer from the problem of sulfur poisoning which seriously limits their practical application. This review summarized sulfur poisoning mechanisms of various SCR deNG catalysts and strategies to reduce deactivation caused by SO2 such as doping metals, controlling the structures and morphologies of the catalysts, and selecting appropriate supports. The methods and procedures of catalysts preparation and the reaction conditions also have effect on SO2-resistance of the catalysts. Several novel catalyst systems that exhibited good SO2 resistance are also introduced. This paper could provide guidance for the development of highly efficient sulfur-tolerant deNOx catalysts.展开更多
Lithium recovery from spent lithium-ion batteries(LIBs)have attracted extensive attention due to the skyrocketing price of lithium.The medium-temperature carbon reduction roasting was proposed to preferential selectiv...Lithium recovery from spent lithium-ion batteries(LIBs)have attracted extensive attention due to the skyrocketing price of lithium.The medium-temperature carbon reduction roasting was proposed to preferential selective extraction of lithium from spent Li-CoO_(2)(LCO)cathodes to overcome the incomplete recovery and loss of lithium during the recycling process.The LCO layered structure was destroyed and lithium was completely converted into water-soluble Li2CO_(3)under a suitable temperature to control the reduced state of the cobalt oxide.The Co metal agglomerates generated during medium-temperature carbon reduction roasting were broken by wet grinding and ultrasonic crushing to release the entrained lithium.The results showed that 99.10%of the whole lithium could be recovered as Li2CO_(3)with a purity of 99.55%.This work provided a new perspective on the preferentially selective extraction of lithium from spent lithium batteries.展开更多
基金supported financially by the National Natural Science Foundation of China(No.51774146)the Guangzhou Municipal Science and Technology Program(Nos.201605120111410 and 201804020032)the Guangdong Key Laboratory of Rare Earth Development and Applications(No.XTKY-201801)。
文摘Aiming at improving the performance/cost ratio in grain boundary diffusion process(GBDP),the critical RE containing Pr-Al-Cu alloy,less expensive RE containing La-Al-Cu alloy and non-RE Al-Cu alloy were employed as the diffusion sources.The preliminary results show that the coercivity was successfully enhanced from 1000 kA/m to 1695,1156 and 1125 kA/m by Pr70Al20Cu10,La70Al20Cu10 and Al75Cu25(at.%) alloys diffusion,respectively,due to the formation of(Nd,Pr)-Fe-B,La2 O3 and c-Nd2 O3 phases respectively,after diffusion.It is also found that the corrosion resistance can be improved by Al-Cu diffusion due to the positive effects of Al and Cu elements in grain boundary.The present results demonstrated the various coercivity enhancement mechanisms for the GBDP based on different diffusion sources,and provided feasible solutions for cost reduction of GBDP and NdFeB production by saving RE resource.
基金supported by the National Science and Technology Major Special Project (No.2009ZX04006-032)the National Natural Science Foundation of China (No.50274021) and Baoshan Iron and SteelCo.,Ltd.,China
文摘Al2O3-SiC composite was synthesized with pyrophyllite and natural graphite as raw materials by carbothermal reduction reaction under argon atmosphere. The effect of synthesis temperature on phase composition and microstructure was investigated. Low-carbon MgO-C refractories were prepared by using the synthesized Al2O3-SiC composite as additive. The effect of its addition on the slag penetration and corrosion resistance as well as oxidation resistance of the refractories was investigated, and the slag resistance and oxidation resistance mechanisms of the Al2O3-SiC composite were also discussed. The results show that the synthesis temperature has a great influence on preparation of Al2O3-SiC composite. The Al2O3-SiC composite can be synthesized at 1873-1973 K under argon atmosphere, with pyrophyllite and natural graphite as raw materials, and particle sizes of the composite synthesized at 1973 K are mainly distributed as 1-2 μm. The slag penetration and corrosion resistance of low-carbon M80-C refractories can be remarkably improved by adding the synthesized Al2O3-SiC composite, and the oxidation resistance has an improvement to some extent. The increase of slag viscosity and the formation of MgAl2O4 can effectively inhibit the slag penetration and corrosion for the refractories.
文摘In this study,a MnOx@TiO2 core‐shell catalyst prepared by a two‐step method was used for the low‐temperature selective catalytic reduction of NOx with NH3.The catalyst exhibits high activity,high stability,and excellent N2 selectivity.Furthermore,it displays better SO2 and H2O tolerance than its MnOx,TiO2,and MnOx/TiO2 counterparts.The prepared catalyst was characterized systematically by transmission electron microscopy,high‐resolution transmission electron microscopy,X‐ray diffraction,Raman,BET,X‐ray photoelectron spectroscopy,NH3 temperature‐programmed desorption and H2 temperature‐programmed reduction analyses.The optimized MnOx@TiO2 catalyst exhibits an obvious core‐shell structure,where the TiO2 shell is evenly distributed over the MnOx nanorod core.The catalyst also presents abundant mesopores,Lewis‐acid sites,and high redox capability,all of which enhance its catalytic performance.According to the XPS results,the decrease in the number of Mn4+active centers after SO2 poisoning is significantly lower in MnOx@TiO2 than in MnOx/TiO2.The core‐shell structure is hence able to protect the catalytic active sites from H2O and SO2 poisoning.
基金the Sichuan Science and Technology Program(No.2019YFS0495-02)。
文摘The selective catalytic reduction(SCR)of NO_(x) by NH3 is one of the most mature technologies for NO_(x) treatment.Catalysts are the main factors affecting denitrification efficiency.Zeolites as low-tempe rature NH3-SCR catalysts have been extensively studied in the past few years.In this work,the mechanism of zeolites for NH3-SCR reaction was reviewed and the denitrification performances of zeolite catalysts prepared by different methods were compared.The effects of sulfur and water poisoning on zeolite catalysts in NH3-SCR reaction were also analyzed.Several ways to address the problems in lowtemperature NH3-SCR reaction were discussed.Hopefully,this review could provide a fundamental understanding of SCR reaction on zeolite catalysts and pave the way toward similar studies to realize its commercial applications.
基金Supported by the Scientific Research Foundation for the Returned Overseas Chinese Scholars,State Education Ministrythe National Natural Science Foundation of China(21506150)
文摘The selective catalytic reduction （SCR） of NOx with NH3 has been proven to be an efficient technology for NOx conversion to N2. However, the catalysts used for SCR usually suffer from the problem of sulfur poisoning which seriously limits their practical application. This review summarized sulfur poisoning mechanisms of various SCR deNG catalysts and strategies to reduce deactivation caused by SO2 such as doping metals, controlling the structures and morphologies of the catalysts, and selecting appropriate supports. The methods and procedures of catalysts preparation and the reaction conditions also have effect on SO2-resistance of the catalysts. Several novel catalyst systems that exhibited good SO2 resistance are also introduced. This paper could provide guidance for the development of highly efficient sulfur-tolerant deNOx catalysts.
基金the Science and Technology Key Project of Anhui Province,China(No.2022e03020004).
文摘Lithium recovery from spent lithium-ion batteries(LIBs)have attracted extensive attention due to the skyrocketing price of lithium.The medium-temperature carbon reduction roasting was proposed to preferential selective extraction of lithium from spent Li-CoO_(2)(LCO)cathodes to overcome the incomplete recovery and loss of lithium during the recycling process.The LCO layered structure was destroyed and lithium was completely converted into water-soluble Li2CO_(3)under a suitable temperature to control the reduced state of the cobalt oxide.The Co metal agglomerates generated during medium-temperature carbon reduction roasting were broken by wet grinding and ultrasonic crushing to release the entrained lithium.The results showed that 99.10%of the whole lithium could be recovered as Li2CO_(3)with a purity of 99.55%.This work provided a new perspective on the preferentially selective extraction of lithium from spent lithium batteries.
