A design of a high-speed multi-core processor with compact size is a trending approach in the Integrated Circuits(ICs)fabrication industries.Because whenever device size comes down into narrow,designers facing many po...A design of a high-speed multi-core processor with compact size is a trending approach in the Integrated Circuits(ICs)fabrication industries.Because whenever device size comes down into narrow,designers facing many power den-sity issues should be reduced by scaling threshold voltage and supply voltage.Initially,Complementary Metal Oxide Semiconductor(CMOS)technology sup-ports power saving up to 32 nm gate length,but further scaling causes short severe channel effects such as threshold voltage swing,mobility degradation,and more leakage power(less than 32)at gate length.Hence,it directly affects the arithmetic logic unit(ALU),which suffers a significant power density of the scaled multi-core architecture.Therefore,it losses reliability features to get overheating and increased temperature.This paper presents a novel power mini-mization technique for active 4-bit ALU operations using Fin Field Effect Tran-sistor(FinFET)at 22 nm technology.Based on this,a diode is directly connected to the load transistor,and it is active only at the saturation region as a function.Thereby,the access transistor can cutoff of the leakage current,and sleep transis-tors control theflow of leakage current corresponding to each instant ALU opera-tion.The combination of transistors(access and sleep)reduces the leakage current from micro to nano-ampere.Further,the power minimization is achieved by con-necting the number of transistors(6T and 10T)of the FinFET structure to ALU with 22 nm technology.For simulation concerns,a Tanner(T-Spice)with 22 nm technology implements the proposed design,which reduces threshold vol-tage swing,supply power,leakage current,gate length delay,etc.As a result,it is quite suitable for the ALU architecture of a high-speed multi-core processor.展开更多
A new 11 T SRAM cell with write-assist is proposed to improve operation at low supply voltage. In this technique, a negative bit-line voltage is applied to one of the write bit-lines, while a boosted voltage is applie...A new 11 T SRAM cell with write-assist is proposed to improve operation at low supply voltage. In this technique, a negative bit-line voltage is applied to one of the write bit-lines, while a boosted voltage is applied to the other write bit-line where transmission gate access is used in proposed 11 T cell. Supply voltage to one of the inverters is interrupted to weaken the feedback. Improved write feature is attributed to strengthened write access devices and weakened feedback loop of cell at the same time. Amount of boosting required for write performance improvement is also reduced due to feedback weakening, solving the persistent problem of half-selected cells and reliability reduction of access devices with the other suggested boosted and negative bit-line techniques. The proposed design improves write time by 79%, 63% and slower by 52% with respect to LP 10 T, WRE 8 T and 6 T cells respectively. It is found that write margin for the proposed cell is improved by about 4×, 2.4× and 5.37× compared to WRE8 T, LP10 T and 6 T respectively. The proposed cell with boosted negative bit line（BNBL） provides47%, 31%, and 68.4% improvement in write margin with respect to no write-assist, negative bit line（NBL） and boosted bit line（BBL） write-assist respectively. Also, new sensing circuit with replica bit-line is proposed to give a more precise timing of applying boosted voltages for improved results. All simulations are done on TSMC 45 nm CMOS technology.展开更多
文摘A design of a high-speed multi-core processor with compact size is a trending approach in the Integrated Circuits(ICs)fabrication industries.Because whenever device size comes down into narrow,designers facing many power den-sity issues should be reduced by scaling threshold voltage and supply voltage.Initially,Complementary Metal Oxide Semiconductor(CMOS)technology sup-ports power saving up to 32 nm gate length,but further scaling causes short severe channel effects such as threshold voltage swing,mobility degradation,and more leakage power(less than 32)at gate length.Hence,it directly affects the arithmetic logic unit(ALU),which suffers a significant power density of the scaled multi-core architecture.Therefore,it losses reliability features to get overheating and increased temperature.This paper presents a novel power mini-mization technique for active 4-bit ALU operations using Fin Field Effect Tran-sistor(FinFET)at 22 nm technology.Based on this,a diode is directly connected to the load transistor,and it is active only at the saturation region as a function.Thereby,the access transistor can cutoff of the leakage current,and sleep transis-tors control theflow of leakage current corresponding to each instant ALU opera-tion.The combination of transistors(access and sleep)reduces the leakage current from micro to nano-ampere.Further,the power minimization is achieved by con-necting the number of transistors(6T and 10T)of the FinFET structure to ALU with 22 nm technology.For simulation concerns,a Tanner(T-Spice)with 22 nm technology implements the proposed design,which reduces threshold vol-tage swing,supply power,leakage current,gate length delay,etc.As a result,it is quite suitable for the ALU architecture of a high-speed multi-core processor.
文摘A new 11 T SRAM cell with write-assist is proposed to improve operation at low supply voltage. In this technique, a negative bit-line voltage is applied to one of the write bit-lines, while a boosted voltage is applied to the other write bit-line where transmission gate access is used in proposed 11 T cell. Supply voltage to one of the inverters is interrupted to weaken the feedback. Improved write feature is attributed to strengthened write access devices and weakened feedback loop of cell at the same time. Amount of boosting required for write performance improvement is also reduced due to feedback weakening, solving the persistent problem of half-selected cells and reliability reduction of access devices with the other suggested boosted and negative bit-line techniques. The proposed design improves write time by 79%, 63% and slower by 52% with respect to LP 10 T, WRE 8 T and 6 T cells respectively. It is found that write margin for the proposed cell is improved by about 4×, 2.4× and 5.37× compared to WRE8 T, LP10 T and 6 T respectively. The proposed cell with boosted negative bit line（BNBL） provides47%, 31%, and 68.4% improvement in write margin with respect to no write-assist, negative bit line（NBL） and boosted bit line（BBL） write-assist respectively. Also, new sensing circuit with replica bit-line is proposed to give a more precise timing of applying boosted voltages for improved results. All simulations are done on TSMC 45 nm CMOS technology.
