The microstructure evolutions and nucleation mechanisms of GH4169G alloy were studied by optical microscope, electron backscatter diffraction (EBSD) and transmission electron microscope (TEM). The hot compression test...The microstructure evolutions and nucleation mechanisms of GH4169G alloy were studied by optical microscope, electron backscatter diffraction (EBSD) and transmission electron microscope (TEM). The hot compression tests were performed different imposed reductions in the range of true strain from 0.12 to 1.2 at the temperatures of 930 °-1050 ° with strain rates of 0.01 s^-1-l s^-1. It is found that cumulative and local misorientation increase firstly and then decrease when the strain is increased due to the progress of dynamic recrystallization (DRX). The low angle boundaries (LAGBs) rapidly develop to high angle boundaries (HAGBs) at relatively high deformation temperature or the low strain rate. There are three DRX mechanisms observed for GH4169 G alloy during hot deformation. Discontinuous dynamic recrystallization (DDRX) as the dominant mechanism for GH4169 G alloy is characterized by typical necklace structures and bulged-original boundaries. Besides, different deformation bands with dislocation cells formed in deformed matrix at low temperature and large strain, which indicates that continuous dynamic recrystallization (CDRX) contributed to the DRX process. The twin boundaries lost their coherent characteristics and provide sites for nucleation, which also accelerates the nucleation of DRX.展开更多
The effects of strain rates on the hot working characteristics and nucleation mechanisms of dynamic recrystallization (DRX) were studied by optical microscopy and electron backscatter diffraction (EBSD) technique. Hot...The effects of strain rates on the hot working characteristics and nucleation mechanisms of dynamic recrystallization (DRX) were studied by optical microscopy and electron backscatter diffraction (EBSD) technique. Hot compression tests were conducted using a Gleeble-1500 simulator at a true strain of 0.7 in the temperature range of 1000 to 1150 °C and strain rate range of 0.01 to 10.00 s?1. It is found that the size and volume fraction of the DRX grains in hot-deformed Inconel 625 superalloy firstly decrease and then increase with increasing strain rate. Meanwhile, the nucleation mechanism of DRX is closely related to the deformation strain rate due to the deformation thermal effect. The discontinuous DRX (DDRX) with bulging of original grain boundaries is the primary nucleation mechanism of DRX, while the continuous DRX (CDRX) with progressive subgrain rotation acts as a secondary nucleation mechanism. The twinning formation can activate the nucleation of DRX. The effects of bulging of original grain boundaries and twinning formation are firstly gradually weakened and then strengthened with the increasing strain rate due to the deformation thermal effect. On the contrary, the effect of subgrain rotation is firstly gradually strengthened and then weakened with the increasing strain rate.展开更多
The microstructure and properties of the as-cast,as-homogenized and as-extruded Mg−6Zn−4Sn−1Mn(ZTM641)alloy with various Al contents(0,0.5,1,2,3 and 4 wt.%)were investigated by OM,XRD,DSC,SEM,TEM and uniaxial tensile ...The microstructure and properties of the as-cast,as-homogenized and as-extruded Mg−6Zn−4Sn−1Mn(ZTM641)alloy with various Al contents(0,0.5,1,2,3 and 4 wt.%)were investigated by OM,XRD,DSC,SEM,TEM and uniaxial tensile tests.The results show that when the Al content is not higher than 0.5%,the alloys are mainly composed of α-Mg,Mg_(2)Sn,Al_(8)Mn_(5)and Mg_(7)Zn_(3)phases.When the Al content is higher than 0.5%,the alloys mainly consist ofα-Mg,Mg_(2)Sn,MgZn,Mg_(32)(Al,Zn)_(49),Al_(2)Mg_(5)Zn_(2),Al_(11)Mn_(4)and Al_(8)Mn_(5)phases.A small amount of Al(≤1%)can increase the proportion of fine dynamic recrystallized(DRXed)grains during hot-extrusion process.The roomtemperature tensile test results show that the ZTM641−1Al alloy has the best comprehensive mechanical properties,in which the ultimate tensile strength is 332 MPa,yield strength is 221 MPa and the elongation is 15%.Elevatedtemperature tensile test results at 150 and 200℃ show that ZTM641−2Al alloy has the best comprehensive mechanical properties.展开更多
The accuracy of nucleation parameter is a critical factor in the simulation of microstructural evolution during dynamic recrystallization(DRX).Based on the flow stress curve under hot deformation conditions,a new appr...The accuracy of nucleation parameter is a critical factor in the simulation of microstructural evolution during dynamic recrystallization(DRX).Based on the flow stress curve under hot deformation conditions,a new approach is proposed to identify the nucleation parameter during DRX.In this approach,a cellular automaton(CA) model is applied to quantitatively simulate the microstructural evolution and flow stress during hot deformation;and adaptive response surface method(ARSM) is applied as optimization model to provide input parameters to CA model and evaluate the outputs of the latter.By taking an oxygen-free high-conductivity(OFHC) copper as an example,the good agreement between the simulation results and the experimental observations demonstrates the availability of the proposed method.展开更多
A modified cellular automata （CA） model of dynamic recrystallization （DRX） and a flow stress-based nucleation parameter identification method have been developed. In the method, the modified CA model, which takes ...A modified cellular automata （CA） model of dynamic recrystallization （DRX） and a flow stress-based nucleation parameter identification method have been developed. In the method, the modified CA model, which takes the role of deformation degree on nucleation behavior into consideration, is coupled with an adaptive response surface model （ARSM） to search for the optimum nucleation parameter. The DRX behavior of an oxygen free high conductivity （OFHC） copper with different initial grain sizes has been taken as an example to validate the model. Good agreement is found between the simulated and the experimental results, which demonstrates that the new method can effectively improve the simulation accuracy.展开更多
文摘The microstructure evolutions and nucleation mechanisms of GH4169G alloy were studied by optical microscope, electron backscatter diffraction (EBSD) and transmission electron microscope (TEM). The hot compression tests were performed different imposed reductions in the range of true strain from 0.12 to 1.2 at the temperatures of 930 °-1050 ° with strain rates of 0.01 s^-1-l s^-1. It is found that cumulative and local misorientation increase firstly and then decrease when the strain is increased due to the progress of dynamic recrystallization (DRX). The low angle boundaries (LAGBs) rapidly develop to high angle boundaries (HAGBs) at relatively high deformation temperature or the low strain rate. There are three DRX mechanisms observed for GH4169 G alloy during hot deformation. Discontinuous dynamic recrystallization (DDRX) as the dominant mechanism for GH4169 G alloy is characterized by typical necklace structures and bulged-original boundaries. Besides, different deformation bands with dislocation cells formed in deformed matrix at low temperature and large strain, which indicates that continuous dynamic recrystallization (CDRX) contributed to the DRX process. The twin boundaries lost their coherent characteristics and provide sites for nucleation, which also accelerates the nucleation of DRX.
基金co-funded by the National Natural Science Foundation of China and Baoshan Iron & Steel Co., Ltd. (No. 50834008)
文摘The effects of strain rates on the hot working characteristics and nucleation mechanisms of dynamic recrystallization (DRX) were studied by optical microscopy and electron backscatter diffraction (EBSD) technique. Hot compression tests were conducted using a Gleeble-1500 simulator at a true strain of 0.7 in the temperature range of 1000 to 1150 °C and strain rate range of 0.01 to 10.00 s?1. It is found that the size and volume fraction of the DRX grains in hot-deformed Inconel 625 superalloy firstly decrease and then increase with increasing strain rate. Meanwhile, the nucleation mechanism of DRX is closely related to the deformation strain rate due to the deformation thermal effect. The discontinuous DRX (DDRX) with bulging of original grain boundaries is the primary nucleation mechanism of DRX, while the continuous DRX (CDRX) with progressive subgrain rotation acts as a secondary nucleation mechanism. The twinning formation can activate the nucleation of DRX. The effects of bulging of original grain boundaries and twinning formation are firstly gradually weakened and then strengthened with the increasing strain rate due to the deformation thermal effect. On the contrary, the effect of subgrain rotation is firstly gradually strengthened and then weakened with the increasing strain rate.
基金the financial supports from the National Natural Science Foundation of China(No.51701172)Educational Commission of Hunan Province,China(No.20B579)+2 种基金Major Program of Hunan Province,China(No.2018RS3091)China Postdoctoral Science Foundation(No.2018M632977)the Natural Science Foundation of Hunan Province,China(No.2018JJ3504).
文摘The microstructure and properties of the as-cast,as-homogenized and as-extruded Mg−6Zn−4Sn−1Mn(ZTM641)alloy with various Al contents(0,0.5,1,2,3 and 4 wt.%)were investigated by OM,XRD,DSC,SEM,TEM and uniaxial tensile tests.The results show that when the Al content is not higher than 0.5%,the alloys are mainly composed of α-Mg,Mg_(2)Sn,Al_(8)Mn_(5)and Mg_(7)Zn_(3)phases.When the Al content is higher than 0.5%,the alloys mainly consist ofα-Mg,Mg_(2)Sn,MgZn,Mg_(32)(Al,Zn)_(49),Al_(2)Mg_(5)Zn_(2),Al_(11)Mn_(4)and Al_(8)Mn_(5)phases.A small amount of Al(≤1%)can increase the proportion of fine dynamic recrystallized(DRXed)grains during hot-extrusion process.The roomtemperature tensile test results show that the ZTM641−1Al alloy has the best comprehensive mechanical properties,in which the ultimate tensile strength is 332 MPa,yield strength is 221 MPa and the elongation is 15%.Elevatedtemperature tensile test results at 150 and 200℃ show that ZTM641−2Al alloy has the best comprehensive mechanical properties.
基金Project(2006CB705401) supported by the National Basic Research Program of China
文摘The accuracy of nucleation parameter is a critical factor in the simulation of microstructural evolution during dynamic recrystallization(DRX).Based on the flow stress curve under hot deformation conditions,a new approach is proposed to identify the nucleation parameter during DRX.In this approach,a cellular automaton(CA) model is applied to quantitatively simulate the microstructural evolution and flow stress during hot deformation;and adaptive response surface method(ARSM) is applied as optimization model to provide input parameters to CA model and evaluate the outputs of the latter.By taking an oxygen-free high-conductivity(OFHC) copper as an example,the good agreement between the simulation results and the experimental observations demonstrates the availability of the proposed method.
基金supported by the National Basic Research Program of China (No. 2006CB705401)the National Natural Science Foundation of China (No.51075270)the Natural Science Foundation of the Jiangsu Higher Education Institutions of China (No.10KJD460003)
文摘A modified cellular automata （CA） model of dynamic recrystallization （DRX） and a flow stress-based nucleation parameter identification method have been developed. In the method, the modified CA model, which takes the role of deformation degree on nucleation behavior into consideration, is coupled with an adaptive response surface model （ARSM） to search for the optimum nucleation parameter. The DRX behavior of an oxygen free high conductivity （OFHC） copper with different initial grain sizes has been taken as an example to validate the model. Good agreement is found between the simulated and the experimental results, which demonstrates that the new method can effectively improve the simulation accuracy.
