In this paper, the problem of unsteady laminar boundary-layer flow and heat transfer of a viscous income-pressible fluid over stretching sheet is studied numerically. The unsteadiness in the flow and temperature is ca...In this paper, the problem of unsteady laminar boundary-layer flow and heat transfer of a viscous income-pressible fluid over stretching sheet is studied numerically. The unsteadiness in the flow and temperature is caused by the time-dependent stretching velocity and surface temperature. A similarity transformation is used to reduce the governing boundary-layer equations to couple higher order non-linear ordinary differential equations. These equations are numerically solved using quasi-linearization technique. The effect of the governing parameters unsteadiness parameter and Prandtl number on velocity and temperature profile is discussed. Besides the numerical results for the local skin friction coefficient and local Nusselt number are presented. The computed results are compared with previously reported work.展开更多
A study is presented for magnetohydrodynamics （MHD） flow and heat transfer characteristics of a viscous incompressible electrically conducting micropolar fluid in a channel with stretching walls. The micropolar mode...A study is presented for magnetohydrodynamics （MHD） flow and heat transfer characteristics of a viscous incompressible electrically conducting micropolar fluid in a channel with stretching walls. The micropolar model introduced by Eringen is used to describe the working fluid. The transformed self similar ordinary differential equations together with the associated boundary conditions are solved numerically by an algorithm based on quasi-linearization and multilevel discretization. The effects of some physical parameters on the flow and heat transfer are discussed and presented through tables and graphs. The present investigations may be beneficial in the flow and thermal control of polymeric processing.展开更多
In many industrial applications,heat transfer and tangent hyperbolic fluid flow processes have been garnering increasing attention,owing to their immense importance in technology,engineering,and science.These processe...In many industrial applications,heat transfer and tangent hyperbolic fluid flow processes have been garnering increasing attention,owing to their immense importance in technology,engineering,and science.These processes are relevant for polymer solutions,porous industrial materials,ceramic processing,oil recovery,and fluid beds.The present tangent hyperbolic fluid flow and heat transfer model accurately predicts the shear-thinning phenomenon and describes the blood flow characteristics.Therefore,the entropy production analysis of a non-Newtonian tangent hyperbolic material flow through a vertical microchannel with a quadratic density temperature fluctuation(quadratic/nonlinear Boussinesq approximation)is performed in the present study.The impacts of the hydrodynamic flow and Newton’s thermal conditions on the flow,heat transfer,and entropy generation are analyzed.The governing nonlinear equations are solved with the spectral quasi-linearization method(SQLM).The obtained results are compared with those calculated with a finite element method and the bvp4c routine.In addition,the effects of key parameters on the velocity of the hyperbolic tangent material,the entropy generation,the temperature,and the Nusselt number are discussed.The entropy generation increases with the buoyancy force,the pressure gradient factor,the non-linear convection,and the Eckert number.The non-Newtonian fluid factor improves the magnitude of the velocity field.The power-law index of the hyperbolic fluid and the Weissenberg number are found to be favorable for increasing the temperature field.The buoyancy force caused by the nonlinear change in the fluid density versus temperature improves the thermal energy of the system.展开更多
The optimal design of heating and cooling systems must take into account heat radiation which is a non-linear process.In this study,the mixed convection in a radiative magnetohydrodynamic Eyring-Powell copperwater nan...The optimal design of heating and cooling systems must take into account heat radiation which is a non-linear process.In this study,the mixed convection in a radiative magnetohydrodynamic Eyring-Powell copperwater nanofluid over a stretching cylinder was investigated.The energy balance is modeled,taking into account the non-linear thermal radiation and a thermal slip condition.The effects of the embedded flow parameters on the fluid properties,as well as on the skin friction coefficient and heat transfer rate,are analyzed.Unlike in many existing studies,the recent spectral quasi-linearization method is used to solve the coupled nonlinear boundary-value problem.The computational result shows that increasing the nanoparticle volume fraction,thermal radiation parameter and heat generation parameter enhances temperature profile.We found that the velocity slip parameter and the fluid material parameter enhance the skin friction.A comparison of the current numerical results with existing literature for some limiting cases shows excellent agreement.展开更多
Two intense quasi-linear mesoscale convective systems（QLMCSs） in northern China were simulated using the WRF（Weather Research and Forecasting） model and the 3D-Var（three-dimensional variational） analysis system ...Two intense quasi-linear mesoscale convective systems（QLMCSs） in northern China were simulated using the WRF（Weather Research and Forecasting） model and the 3D-Var（three-dimensional variational） analysis system of the ARPS（Advanced Regional Prediction System） model.A new method in which the lightning density is calculated using both the precipitation and non-precipitation ice mass was developed to reveal the relationship between the lightning activities and QLMCS structures.Results indicate that,compared with calculating the results using two previous methods,the lightning density calculated using the new method presented in this study is in better accordance with observations.Based on the calculated lightning densities using the new method,it was found that most lightning activity was initiated on the right side and at the front of the QLMCSs,where the surface wind field converged intensely.The CAPE was much stronger ahead of the southeastward progressing QLMCS than to the back it,and their lightning events mainly occurred in regions with a large gradient of CAPE.Comparisons between lightning and non-lightning regions indicated that lightning regions featured more intense ascending motion than non-lightning regions;the vertical ranges of maximum reflectivity between lightning and non-lightning regions were very different;and the ice mixing ratio featured no significant differences between the lightning and non-lightning regions.展开更多
文摘In this paper, the problem of unsteady laminar boundary-layer flow and heat transfer of a viscous income-pressible fluid over stretching sheet is studied numerically. The unsteadiness in the flow and temperature is caused by the time-dependent stretching velocity and surface temperature. A similarity transformation is used to reduce the governing boundary-layer equations to couple higher order non-linear ordinary differential equations. These equations are numerically solved using quasi-linearization technique. The effect of the governing parameters unsteadiness parameter and Prandtl number on velocity and temperature profile is discussed. Besides the numerical results for the local skin friction coefficient and local Nusselt number are presented. The computed results are compared with previously reported work.
基金Project supported by the Higher Education Commission of Pakistan
文摘A study is presented for magnetohydrodynamics （MHD） flow and heat transfer characteristics of a viscous incompressible electrically conducting micropolar fluid in a channel with stretching walls. The micropolar model introduced by Eringen is used to describe the working fluid. The transformed self similar ordinary differential equations together with the associated boundary conditions are solved numerically by an algorithm based on quasi-linearization and multilevel discretization. The effects of some physical parameters on the flow and heat transfer are discussed and presented through tables and graphs. The present investigations may be beneficial in the flow and thermal control of polymeric processing.
文摘In many industrial applications,heat transfer and tangent hyperbolic fluid flow processes have been garnering increasing attention,owing to their immense importance in technology,engineering,and science.These processes are relevant for polymer solutions,porous industrial materials,ceramic processing,oil recovery,and fluid beds.The present tangent hyperbolic fluid flow and heat transfer model accurately predicts the shear-thinning phenomenon and describes the blood flow characteristics.Therefore,the entropy production analysis of a non-Newtonian tangent hyperbolic material flow through a vertical microchannel with a quadratic density temperature fluctuation(quadratic/nonlinear Boussinesq approximation)is performed in the present study.The impacts of the hydrodynamic flow and Newton’s thermal conditions on the flow,heat transfer,and entropy generation are analyzed.The governing nonlinear equations are solved with the spectral quasi-linearization method(SQLM).The obtained results are compared with those calculated with a finite element method and the bvp4c routine.In addition,the effects of key parameters on the velocity of the hyperbolic tangent material,the entropy generation,the temperature,and the Nusselt number are discussed.The entropy generation increases with the buoyancy force,the pressure gradient factor,the non-linear convection,and the Eckert number.The non-Newtonian fluid factor improves the magnitude of the velocity field.The power-law index of the hyperbolic fluid and the Weissenberg number are found to be favorable for increasing the temperature field.The buoyancy force caused by the nonlinear change in the fluid density versus temperature improves the thermal energy of the system.
文摘The optimal design of heating and cooling systems must take into account heat radiation which is a non-linear process.In this study,the mixed convection in a radiative magnetohydrodynamic Eyring-Powell copperwater nanofluid over a stretching cylinder was investigated.The energy balance is modeled,taking into account the non-linear thermal radiation and a thermal slip condition.The effects of the embedded flow parameters on the fluid properties,as well as on the skin friction coefficient and heat transfer rate,are analyzed.Unlike in many existing studies,the recent spectral quasi-linearization method is used to solve the coupled nonlinear boundary-value problem.The computational result shows that increasing the nanoparticle volume fraction,thermal radiation parameter and heat generation parameter enhances temperature profile.We found that the velocity slip parameter and the fluid material parameter enhance the skin friction.A comparison of the current numerical results with existing literature for some limiting cases shows excellent agreement.
基金supported jointly by the National Key Basic Research and Development (973) Program of China (Grant No. 2014CB441401)the National Natural Science Foundation of China (Grant Nos. 41405007, 41175043, 41475002, and 41205027)
文摘Two intense quasi-linear mesoscale convective systems（QLMCSs） in northern China were simulated using the WRF（Weather Research and Forecasting） model and the 3D-Var（three-dimensional variational） analysis system of the ARPS（Advanced Regional Prediction System） model.A new method in which the lightning density is calculated using both the precipitation and non-precipitation ice mass was developed to reveal the relationship between the lightning activities and QLMCS structures.Results indicate that,compared with calculating the results using two previous methods,the lightning density calculated using the new method presented in this study is in better accordance with observations.Based on the calculated lightning densities using the new method,it was found that most lightning activity was initiated on the right side and at the front of the QLMCSs,where the surface wind field converged intensely.The CAPE was much stronger ahead of the southeastward progressing QLMCS than to the back it,and their lightning events mainly occurred in regions with a large gradient of CAPE.Comparisons between lightning and non-lightning regions indicated that lightning regions featured more intense ascending motion than non-lightning regions;the vertical ranges of maximum reflectivity between lightning and non-lightning regions were very different;and the ice mixing ratio featured no significant differences between the lightning and non-lightning regions.
