The design, fabrication, and the characterization of a 0.5-V Josephson junction array device are presented for the quantum voltage standards in the National Institute of Metrology(NIM) of China. The device consists of...The design, fabrication, and the characterization of a 0.5-V Josephson junction array device are presented for the quantum voltage standards in the National Institute of Metrology(NIM) of China. The device consists of four junction arrays, each of which has 1200 3-stacked Nb/NbxSi1-x/Nb junctions and an on-chip superconducting microwave circuit which is mainly a power divider enabling each Josephson array being loaded with an equal amount of microwave power. A direct current(dc) quantum voltage of about 0.5 V with a ~1-mA current margin of the 1 st quantum voltage step is obtained.To further prove the quality of NIM device, a comparison between the NIM device with the National Institute of Standards and Technology(NIST) programmable Josephson voltage standard(PJVS) system device is conducted. The difference of the reproduced 0.5-V quantum voltage between the two devices is about 0.55 nV, which indicates good agreement between the two devices. With the homemade device, we have realized a precise and applicable 0.5-V applicable-level quantum voltage.展开更多
Magnetic coils for specific requirements are widely used in modern quantum physics. In this study, a general analytical method of designing the shielded coils for generating an arbitrary axial magnetic field is propos...Magnetic coils for specific requirements are widely used in modern quantum physics. In this study, a general analytical method of designing the shielded coils for generating an arbitrary axial magnetic field is proposed. The theoretical formula for an axial magnetic field generated by a single shielded coil is obtained and used to construct specific coils. The structural parameters of these coils are determined by fitting the theoretical formula with their specific requirements. The feasibility of this method is proved by realizing four concrete kinds of coils: uniform magnetic field generating coils, gradient magnetic field generating coils, asymmetrical uniform magnetic field generating coils, and parabolic magnetic field generating coils. The correctness of these theoretical results is demonstrated by both the finite element simulations and the relevant experimental results. Furthermore, the application of this method is of great significance for developing the quantum physics and quantum devices in future.展开更多
The preparation and electrical properties of diamond nanocones are reviewed, including a maskless etching pro- cess and mechanism of large-area diamond conical nanostructure arrays using a hot filament chemical vapor ...The preparation and electrical properties of diamond nanocones are reviewed, including a maskless etching pro- cess and mechanism of large-area diamond conical nanostructure arrays using a hot filament chemical vapor deposition （HFCVD） system with negatively biased substrates, and the field electron emission, gas sensing, and quantum transport properties of a diamond nanocone array or an individual diamond nanocone. Optimal cone aspect ratio and array density are investigated, along with the relationships between the cone morphologies and experimental parameters, such as the CH4/H2 ratio of the etching gas, the bias current, and the gas pressure. The reviewed experiments demonstrate the possi- bility of using nanostructured diamond cones as a display device element, a point electron emission source, a gas sensor or a quantum device.展开更多
基金Project supported by the National Key Research and Development Program of China(Grant No.2016YFF02000402)
文摘The design, fabrication, and the characterization of a 0.5-V Josephson junction array device are presented for the quantum voltage standards in the National Institute of Metrology(NIM) of China. The device consists of four junction arrays, each of which has 1200 3-stacked Nb/NbxSi1-x/Nb junctions and an on-chip superconducting microwave circuit which is mainly a power divider enabling each Josephson array being loaded with an equal amount of microwave power. A direct current(dc) quantum voltage of about 0.5 V with a ~1-mA current margin of the 1 st quantum voltage step is obtained.To further prove the quality of NIM device, a comparison between the NIM device with the National Institute of Standards and Technology(NIST) programmable Josephson voltage standard(PJVS) system device is conducted. The difference of the reproduced 0.5-V quantum voltage between the two devices is about 0.55 nV, which indicates good agreement between the two devices. With the homemade device, we have realized a precise and applicable 0.5-V applicable-level quantum voltage.
基金Project supported by the National Natural Science Foundation of China(Grant Nos.61701515 and 61671458)the Postdoctoral Science Foundation,China(Grant No.2017M613367)+1 种基金the Natural Science Foundation of Hunan Province,China(Grant No.2018JJ3608)the Research Project of National University of Defense Technology,China(Grant No.ZK170204)
文摘Magnetic coils for specific requirements are widely used in modern quantum physics. In this study, a general analytical method of designing the shielded coils for generating an arbitrary axial magnetic field is proposed. The theoretical formula for an axial magnetic field generated by a single shielded coil is obtained and used to construct specific coils. The structural parameters of these coils are determined by fitting the theoretical formula with their specific requirements. The feasibility of this method is proved by realizing four concrete kinds of coils: uniform magnetic field generating coils, gradient magnetic field generating coils, asymmetrical uniform magnetic field generating coils, and parabolic magnetic field generating coils. The correctness of these theoretical results is demonstrated by both the finite element simulations and the relevant experimental results. Furthermore, the application of this method is of great significance for developing the quantum physics and quantum devices in future.
基金supported by the National Natural Science Foundation of China (Grant Nos. 51272278, 11174362, and 91023041)the National Basic Research Program of China (Grant No. 2009CB930502)the Knowledge Innovation Program of the Chinese Academy of Sciences (Grant No. KJCX2-EW-W02)
文摘The preparation and electrical properties of diamond nanocones are reviewed, including a maskless etching pro- cess and mechanism of large-area diamond conical nanostructure arrays using a hot filament chemical vapor deposition （HFCVD） system with negatively biased substrates, and the field electron emission, gas sensing, and quantum transport properties of a diamond nanocone array or an individual diamond nanocone. Optimal cone aspect ratio and array density are investigated, along with the relationships between the cone morphologies and experimental parameters, such as the CH4/H2 ratio of the etching gas, the bias current, and the gas pressure. The reviewed experiments demonstrate the possi- bility of using nanostructured diamond cones as a display device element, a point electron emission source, a gas sensor or a quantum device.
