期刊文献+
共找到3篇文章
< 1 >
每页显示 20 50 100
Self-cleaning performance of a self-cleaning pre-coated steel sheet in an industrial environment
1
作者 YANG Jiayun DONG Hang +2 位作者 LI Shuyuan MA Yuan DAI Yigang 《Baosteel Technical Research》 CAS 2016年第1期44-48,共5页
A type of self-cleaning pre-coated steel sheet with excellent self-cleaning performance was developed using hydrophilic surface treatment technology. To understand the self-cleaning properties of this pre-coated steel... A type of self-cleaning pre-coated steel sheet with excellent self-cleaning performance was developed using hydrophilic surface treatment technology. To understand the self-cleaning properties of this pre-coated steel sheet in an industrial environment, the Jiangjin natural environmental test station was chosen as the outdoor exposure test to be conducted, and the self-cleaning performance of the steel sheet was studied by measuring the water contact angle, stain resistance factor, color difference, and gloss of the steel sheet during the outdoor exposure test. The water contact angle of the self-cleaning steel sheet quickly decreased from 84° to 29° during the outdoor exposure test, and the steel sheet showed excellent hydrophilic properties, which were beneficial to the spread of rain drops and detrimental to the accumulation of the surface pollutants. After an outdoor exposure of 12 months,the self-cleaning steel sheet had a higher stain resistance and cleaner surface than the comparison sample sheet, demonstrating its excellent self-cleaning properties. Moreover, the color difference and gloss rate of the self-cleaning steel 'sheet were similar to those of the pre-coated steel sheet without hydrophilic surface treatment. Therefore, the hydrophilic surface treatment technology used in this study did not affect the anti-aging property of the self-cleaning steel sheet. 展开更多
关键词 SELF-CLEANING pre-coated steel sheet outdoor exposure stain resistance HYDROPHILICITY
下载PDF
抗静电预涂钢板的开发
2
作者 Hiroyasu Furukawa Hiroshi Kanai +1 位作者 Kenji Inada 金旭芳 《中国冶金》 CAS 2008年第10期24-27,共4页
PCM(预涂金属)的涂膜主要由有机树脂(绝缘体)组成,涂膜表面与其它材料(如模具、皮带输送机)摩擦时产生静电,灰尘会粘附在PCM表面。在面涂中加入适当的树脂和添加剂,能抑制与其它材料摩擦所产生的表面静电压,从而防止灰尘的粘附。基于这... PCM(预涂金属)的涂膜主要由有机树脂(绝缘体)组成,涂膜表面与其它材料(如模具、皮带输送机)摩擦时产生静电,灰尘会粘附在PCM表面。在面涂中加入适当的树脂和添加剂,能抑制与其它材料摩擦所产生的表面静电压,从而防止灰尘的粘附。基于这种想法,开发了抗静电预涂钢板,抑制静电所导致的灰尘粘附。当静电压产生和灰尘粘附时,PCM显示了显著效果。通过选择底涂和预处理,也得到了一种不含铬酸盐型的PCM。希望这种抗静电的PCM将来能广泛应用于各个领域。 展开更多
关键词 抗静电 预涂钢板 灰尘附着力 表面静电压
原文传递
工业环境中自清洁型彩涂钢板的自清洁性能研究
3
作者 杨家云 董航 +2 位作者 李姝湲 马源 戴毅刚 《宝钢技术》 CAS 2016年第1期19-22,共4页
采用表面亲水化处理技术开发了一种具有自清洁功能的自清洁型彩涂钢板。为真实反映该彩涂钢板在工业环境中的自清洁性能,将其放置在江津自然环境试验站进行户外曝晒,并通过测量不同曝晒时间下试样表面水接触角、色差及光泽研究了其在工... 采用表面亲水化处理技术开发了一种具有自清洁功能的自清洁型彩涂钢板。为真实反映该彩涂钢板在工业环境中的自清洁性能,将其放置在江津自然环境试验站进行户外曝晒,并通过测量不同曝晒时间下试样表面水接触角、色差及光泽研究了其在工业环境中的自清洁性能。结果显示,该彩涂钢板表面水接触角在户外曝晒过程中迅速从84°降低至36°,并继续缓慢降低至29°,表现出优异的亲水性,有利于雨水在其表面铺展和冲刷掉表面污染物。户外曝晒12个月后,该彩涂钢板的耐沾污指数高达89.1,且几乎无污染物积聚,表现出优异的自清洁性能。在户外曝晒过程中,该彩涂钢板的表面色差及光泽均与未亲水化处理的彩涂钢板相似,表明研究采用的亲水化处理技术不会影响自清洁彩涂钢板的户外耐老化性能。 展开更多
关键词 自清洁 彩涂钢板 户外曝晒 耐沾污指数 亲水性
下载PDF
上一页 1 下一页 到第
使用帮助 返回顶部