The effect of mineralogy and texture on the beneficiation of goethitic ores from two different origins is highlighted. Sample A having 54.47% Fe with 8.57% loss of ignition （LOl） indicates the presence of vitreous a...The effect of mineralogy and texture on the beneficiation of goethitic ores from two different origins is highlighted. Sample A having 54.47% Fe with 8.57% loss of ignition （LOl） indicates the presence of vitreous and ochreous goethite, martite and microplaty hematite as the major minerals. Sample B contains 56.90% Fe with 14.4% LOI. There is a pisolithic laterite containing vitreous and ochreous goethite, quartz, kaolinitic clay and there is no hematite mineral. The liberated minerals in -150 ＋ 100 μm size class are 74% for Sample A and 37% only for Sample B which shows that the Sample A appears to be more amenable to beneficiate. A concentrate of 46.7% with 63.22% Fe could be recovered from Sample A while subjected to gravity separation followed by wet magnetic separation. The Sample B does not respond to gravity and magnetic separation due to its complex mineralogy. However, calcination of the Sample B followed by magnetic separation gives the encouraging results. Thus, anomalous behaviour of the goethite dominated ores in beneficiation is attributed to the different textural and liberation characteristic.展开更多
Worldwide,iron ore sintering is the largest industrial single source of dioxin emissions^(1-3).Conversely, some ores may help in reducing emissions,because of their aptitude of(a) adsorbing and(b) oxidising or decompo...Worldwide,iron ore sintering is the largest industrial single source of dioxin emissions^(1-3).Conversely, some ores may help in reducing emissions,because of their aptitude of(a) adsorbing and(b) oxidising or decomposing TOC and dioxins^(4,5).Such dioxin abatement abilities were tested for five types of ores,representing major ore origins(Australia,Brazil,and South Africa ),minerals(magnetite,haematite,goethite,pisolite ),and properties,e.g.porosity,and Loss on Ignition(LOI) values.In total,11 exploratory experimental runs were conducted on iron ores,to test the oxidation in air of four different organic trace test substances:acetone, chloroform,n-hexane,and toluene contained in a test gas were led simultaneously over the ore over a preestablished temperature program.Each test comprehends a first part with a programmed temperature rise,a brief soaking period at the temperature maximum(>400℃),and a ballistic cooling part.The concentration of the four organics is continuously monitored by Mass Spectrometry(MS) operating in a full-scan mode(m/e < 100). Exploratory experiments allowed differentiating the ores tested according to the Destruction & Removal Efficiency(DRE) attained.To check the results the products of oxidation in the effluent were sampled on Tenax and identified.Also,the dioxin load remaining on several test residues was examined and found to be quite limited (pg I-TEQ/g).展开更多
基金Ministry of Steel for funding the research work (GAP 0224)
文摘The effect of mineralogy and texture on the beneficiation of goethitic ores from two different origins is highlighted. Sample A having 54.47% Fe with 8.57% loss of ignition （LOl） indicates the presence of vitreous and ochreous goethite, martite and microplaty hematite as the major minerals. Sample B contains 56.90% Fe with 14.4% LOI. There is a pisolithic laterite containing vitreous and ochreous goethite, quartz, kaolinitic clay and there is no hematite mineral. The liberated minerals in -150 ＋ 100 μm size class are 74% for Sample A and 37% only for Sample B which shows that the Sample A appears to be more amenable to beneficiate. A concentrate of 46.7% with 63.22% Fe could be recovered from Sample A while subjected to gravity separation followed by wet magnetic separation. The Sample B does not respond to gravity and magnetic separation due to its complex mineralogy. However, calcination of the Sample B followed by magnetic separation gives the encouraging results. Thus, anomalous behaviour of the goethite dominated ores in beneficiation is attributed to the different textural and liberation characteristic.
文摘Worldwide,iron ore sintering is the largest industrial single source of dioxin emissions^(1-3).Conversely, some ores may help in reducing emissions,because of their aptitude of(a) adsorbing and(b) oxidising or decomposing TOC and dioxins^(4,5).Such dioxin abatement abilities were tested for five types of ores,representing major ore origins(Australia,Brazil,and South Africa ),minerals(magnetite,haematite,goethite,pisolite ),and properties,e.g.porosity,and Loss on Ignition(LOI) values.In total,11 exploratory experimental runs were conducted on iron ores,to test the oxidation in air of four different organic trace test substances:acetone, chloroform,n-hexane,and toluene contained in a test gas were led simultaneously over the ore over a preestablished temperature program.Each test comprehends a first part with a programmed temperature rise,a brief soaking period at the temperature maximum(>400℃),and a ballistic cooling part.The concentration of the four organics is continuously monitored by Mass Spectrometry(MS) operating in a full-scan mode(m/e < 100). Exploratory experiments allowed differentiating the ores tested according to the Destruction & Removal Efficiency(DRE) attained.To check the results the products of oxidation in the effluent were sampled on Tenax and identified.Also,the dioxin load remaining on several test residues was examined and found to be quite limited (pg I-TEQ/g).
