The laser device is the core component of coherent Doppler wind lidar.The peak power and pulse width of laser transmitting pulse have important effects on SNR.Based on coherent Doppler wind pulse lidar,the peak power ...The laser device is the core component of coherent Doppler wind lidar.The peak power and pulse width of laser transmitting pulse have important effects on SNR.Based on coherent Doppler wind pulse lidar,the peak power and pulse width influence on SNR is studied on the theoretical derivation and analysis,and the results show that the higher the peak power can realize the greater the signal-to-noise ratio of coherent Doppler wind lidar.But when the peak power is too large,the laser pulse may appear nonlinear phenomenon,which cause the damage of the laser.So,the peak power must be less than the stimulated brillouin scattering power threshold.Increasing the pulse width can make the laser device to output more energy,but it will also make the spatial resolution lower,and the influence of turbulence on SNR will be greater.After a series of simulation analyses,it can be concluded that when the peak power is 650W and the pulse width is 340ns,the SNR of the system can be maximized.In addition,the coherent Doppler wind lidar system is set up to carry out corresponding experimental verification.The experimental results are consistent with the theoretical analysis and simulation,which verifies the correctness of the theoretical analysis and simulation results.It provides theoretical basis and practical ex-perience for the design of laser transmitting pulse in coherent Doppler wind lidar system.展开更多
A long-range sound propagation experiment was conducted in the West Pacific Ocean in summer 2013.The signals received by a towed array indicate that the travel speed of pulse peak(TSPP)in the convergence zones is stab...A long-range sound propagation experiment was conducted in the West Pacific Ocean in summer 2013.The signals received by a towed array indicate that the travel speed of pulse peak(TSPP)in the convergence zones is stable.Therefore,an equivalent sound speed can be used at all ranges in the convergence zones.A fast calculation method based on the beam-displace-ment ray-mode(BDRM)theory and convergence zone theory is proposed to calculate this equivalent sound speed.The computation speed of this proposed method is over 1000 times faster than that of the conventional calculation method based on the normal mode theory,with the computation error less than 0.4%compared with the experimental result.Also,the effect of frequency and sound speed profile on the TSPP is studied with the conventional and fast calculation methods,showing that the TSPP is almost independent of the frequency and sound speed profile in the ocean surface layer.展开更多
We report on the properties of strong pulses from PSR B0656＋14 by analyzing the data obtained using the Urumqi 25-m radio telescope at 1540 MHz from August 2007 to September 2010.In 44 h of observational data,a total...We report on the properties of strong pulses from PSR B0656＋14 by analyzing the data obtained using the Urumqi 25-m radio telescope at 1540 MHz from August 2007 to September 2010.In 44 h of observational data,a total of 67 pulses with signal-to-noise ratios above a 5σthreshold were detected.The peak flux densities of these pulses are 58 to 194 times that of the average profile,and their pulse energies are 3 to 68 times that of the average pulse.These pulses are clustered around phases about 5-ahead of the peak of the average profile.Compared with the width of the average profile,they are relatively narrow,with the full widths at half-maximum ranging from 0.28 ° to 1.78 °.The distribution of pulse-energies follows a lognormal distribution.These sporadic strong pulses detected from PSR B0656＋14 have different characteristics from both typical giant pulses and its regular pulses.展开更多
We report a Yb-doped all-fiber laser system generating burst-mode pulses with high energy and high peak power at a GHz intra-burst repetition rate.To acquire the uniform burst envelope,a double-pre-compensation struct...We report a Yb-doped all-fiber laser system generating burst-mode pulses with high energy and high peak power at a GHz intra-burst repetition rate.To acquire the uniform burst envelope,a double-pre-compensation structure with an arbitrary waveform laser diode driver and an acoustic optical modulator is utilized for the first time.The synchronous pumping is utilized for the system to reduce the burst repetition rate to 100 Hz and suppress the amplified spontaneous emission effect.By adjusting the gain of every stage,uniform envelopes with different output energies can be easily obtained.The intra-burst repetition rate can be tuned from 0.5 to 10 GHz actively modulated by an electro-optic modulator.Optimized by timing control of eight channels of analog signal and amplified by seven stages of Yb-doped fiber amplifier,the pulse energy achieves 13.3 mJ at 0.5 ns intra-burst pulse duration,and the maximum peak power reaches approximately3.6 MW at 48 ps intra-burst pulse duration.To the best of our knowledge,for reported burst-mode all-fiber lasers,this is a record for output energy and peak power with nanosecond-level burst duration,and the widest tuning range of the intra-burst repetition rate.In particular,this flexibly tunable burst-mode laser system can be directly applied to generate high-power frequency-tunable microwaves.展开更多
文摘The laser device is the core component of coherent Doppler wind lidar.The peak power and pulse width of laser transmitting pulse have important effects on SNR.Based on coherent Doppler wind pulse lidar,the peak power and pulse width influence on SNR is studied on the theoretical derivation and analysis,and the results show that the higher the peak power can realize the greater the signal-to-noise ratio of coherent Doppler wind lidar.But when the peak power is too large,the laser pulse may appear nonlinear phenomenon,which cause the damage of the laser.So,the peak power must be less than the stimulated brillouin scattering power threshold.Increasing the pulse width can make the laser device to output more energy,but it will also make the spatial resolution lower,and the influence of turbulence on SNR will be greater.After a series of simulation analyses,it can be concluded that when the peak power is 650W and the pulse width is 340ns,the SNR of the system can be maximized.In addition,the coherent Doppler wind lidar system is set up to carry out corresponding experimental verification.The experimental results are consistent with the theoretical analysis and simulation,which verifies the correctness of the theoretical analysis and simulation results.It provides theoretical basis and practical ex-perience for the design of laser transmitting pulse in coherent Doppler wind lidar system.
基金supported by the National Natural Science Foundation of China(Grant Nos.11174312 and 11104312)
文摘A long-range sound propagation experiment was conducted in the West Pacific Ocean in summer 2013.The signals received by a towed array indicate that the travel speed of pulse peak(TSPP)in the convergence zones is stable.Therefore,an equivalent sound speed can be used at all ranges in the convergence zones.A fast calculation method based on the beam-displace-ment ray-mode(BDRM)theory and convergence zone theory is proposed to calculate this equivalent sound speed.The computation speed of this proposed method is over 1000 times faster than that of the conventional calculation method based on the normal mode theory,with the computation error less than 0.4%compared with the experimental result.Also,the effect of frequency and sound speed profile on the TSPP is studied with the conventional and fast calculation methods,showing that the TSPP is almost independent of the frequency and sound speed profile in the ocean surface layer.
基金funded by the National Natural Science Foundation of China(Grant No.10973026)
文摘We report on the properties of strong pulses from PSR B0656＋14 by analyzing the data obtained using the Urumqi 25-m radio telescope at 1540 MHz from August 2007 to September 2010.In 44 h of observational data,a total of 67 pulses with signal-to-noise ratios above a 5σthreshold were detected.The peak flux densities of these pulses are 58 to 194 times that of the average profile,and their pulse energies are 3 to 68 times that of the average pulse.These pulses are clustered around phases about 5-ahead of the peak of the average profile.Compared with the width of the average profile,they are relatively narrow,with the full widths at half-maximum ranging from 0.28 ° to 1.78 °.The distribution of pulse-energies follows a lognormal distribution.These sporadic strong pulses detected from PSR B0656＋14 have different characteristics from both typical giant pulses and its regular pulses.
基金supported by the National Natural Science Foundation of China(No.62205374)the Research Funds of the State Key Laboratory of Pulsed Power Laser Technology,China(Nos.SKL2021KF07 and SKL2020ZR06)
文摘We report a Yb-doped all-fiber laser system generating burst-mode pulses with high energy and high peak power at a GHz intra-burst repetition rate.To acquire the uniform burst envelope,a double-pre-compensation structure with an arbitrary waveform laser diode driver and an acoustic optical modulator is utilized for the first time.The synchronous pumping is utilized for the system to reduce the burst repetition rate to 100 Hz and suppress the amplified spontaneous emission effect.By adjusting the gain of every stage,uniform envelopes with different output energies can be easily obtained.The intra-burst repetition rate can be tuned from 0.5 to 10 GHz actively modulated by an electro-optic modulator.Optimized by timing control of eight channels of analog signal and amplified by seven stages of Yb-doped fiber amplifier,the pulse energy achieves 13.3 mJ at 0.5 ns intra-burst pulse duration,and the maximum peak power reaches approximately3.6 MW at 48 ps intra-burst pulse duration.To the best of our knowledge,for reported burst-mode all-fiber lasers,this is a record for output energy and peak power with nanosecond-level burst duration,and the widest tuning range of the intra-burst repetition rate.In particular,this flexibly tunable burst-mode laser system can be directly applied to generate high-power frequency-tunable microwaves.
