To simulate the bending behavior of wheat straw,a flexible straw model was developed based on the Hertz-Mindlin with bonding model using discrete element method.The proposed model was constructed by bonding straw unit...To simulate the bending behavior of wheat straw,a flexible straw model was developed based on the Hertz-Mindlin with bonding model using discrete element method.The proposed model was constructed by bonding straw units(filled by multi-spherical method)through parallel bonding keys.By means of a three-point bending test,single-factor sensitivity analysis and calibration of bonding parameters were performed.Results showed that elastic modulus of the flexible straw enhanced with the increase of bonded disk radius,normal stiffness per unit area and shear stiffness per unit area.The three bonding parameters were respectively calibrated to be 2.11 mm,9.48×10^(9)N/m^(3)and 4.67×10^(9)N/m^(3) by solving the regression equation developed from Box-Behnken design.The simulated elastic modulus(in terms of those three calibrated parameters)exhibited 4.20%difference with the measured one.It proved that the flexible straw could accurately demonstrate bending property of the wheat straw.This would not only help to improve accuracy in simulating wheat straw,but also provide references for flexible straw modeling and parameters calibration of other crops.展开更多
基金This research was financially supported by Research Fund for the Doctoral Program of Higher Education of China(Grant No.20130204110020).
文摘To simulate the bending behavior of wheat straw,a flexible straw model was developed based on the Hertz-Mindlin with bonding model using discrete element method.The proposed model was constructed by bonding straw units(filled by multi-spherical method)through parallel bonding keys.By means of a three-point bending test,single-factor sensitivity analysis and calibration of bonding parameters were performed.Results showed that elastic modulus of the flexible straw enhanced with the increase of bonded disk radius,normal stiffness per unit area and shear stiffness per unit area.The three bonding parameters were respectively calibrated to be 2.11 mm,9.48×10^(9)N/m^(3)and 4.67×10^(9)N/m^(3) by solving the regression equation developed from Box-Behnken design.The simulated elastic modulus(in terms of those three calibrated parameters)exhibited 4.20%difference with the measured one.It proved that the flexible straw could accurately demonstrate bending property of the wheat straw.This would not only help to improve accuracy in simulating wheat straw,but also provide references for flexible straw modeling and parameters calibration of other crops.
