The SKS furnace is a horizontal cylindrical reactor similar to a Noranda furnace,however,the oxygen enriched air isblown into the furnace from the bottom.Mechanism model of the SKS process was developed by analyzing t...The SKS furnace is a horizontal cylindrical reactor similar to a Noranda furnace,however,the oxygen enriched air isblown into the furnace from the bottom.Mechanism model of the SKS process was developed by analyzing the smeltingcharacteristics deeply.In our model,the furnace section from top to bottom is divided into seven functional layers,i.e.,gas layer,mineral decomposition transitioning layer,slag layer,slag formation transitioning layer,matte formation transitioning layer,weakoxidizing layer and strong oxidizing layer.The furnace along the length direction is divided into three functional regions,that is,reaction region,separation transitioning region and liquid phase separation and settling region.These layers or regions play differentroles in the model in describing the mechanism of the smelting process.The SKS smelting is at a multiphase non-steady equilibriumstate,and the oxygen and sulfur potentials change gradually in the length and cross directions.The smelting capacity of the SKSprocess could be raised through reasonably controlling the potential values in different layers and regions.展开更多
TiClx （x=2.17） was prepared by using titanium sponge to reduce the concentration of TiCl4 in a NaCl-KCl melt under negative pressure. The as-prepared NaCl-KCl-TiClx melt was employed as the electrolyte, and two para...TiClx （x=2.17） was prepared by using titanium sponge to reduce the concentration of TiCl4 in a NaCl-KCl melt under negative pressure. The as-prepared NaCl-KCl-TiClx melt was employed as the electrolyte, and two parallel crude titanium plates and one high-purity titanium plate were used as the anode and cathode, respectively. A series of electrochemical tests were performed to investigate the influence of electrolytic parameters on the current efficiency and quality of cathodic products. The results indicated that the quality of cathodic products was related to the current efficiency, which is significantly dependent on the current density and the initial concentration of titanium ions. The significance of this study is the attainment of high-purity titanium with a low oxygen content of 30× 10^-6.展开更多
Despite substantial efforts in developing high-performance catalysts for the oxygen reduction reaction(ORR),the persistent challenge lies in the high onset overpotential of the ORR,and the effect of the elec-trolyte s...Despite substantial efforts in developing high-performance catalysts for the oxygen reduction reaction(ORR),the persistent challenge lies in the high onset overpotential of the ORR,and the effect of the elec-trolyte solution cannot be ignored.Consequently,we have systematically investigated the impact of adsorbate species and concentration,as well as solution pH,on the ORR activity on Pt(111)and Pt(poly)electrodes.The results all tend to establish a linear quantitative relationship between the onset potential for ORR and the adsorption equilibrium potential of the adsorbate.This finding indicates the decisive role of adsorbates in the onset potential for ORR,suggesting that the adsorption potential of adsorbates can serve as an intuitive criterion for ORR activity.Additional support for this conclusion is derived from experimental results obtained from the oxygen evolution reaction on Pt(poly)with different adsorbate species and from the hydrogen evolution reaction on Pt(111)with iodine adsorption.We further propose both an empirical equation for the onset potential for ORR and the concept of a potential-regulated adsor-bate shielding effect to elucidate the influence of adsorbates on ORR activity.This study provides new insights into the high onset overpotential of the ORR and offers potential strategies for predicting and enhancingORRactivity inthefuture.展开更多
The deoxidation equilibrium of liquid steel was investigated from a new perspective. Dissolved associate MmOn was used to describe the interaction between dissolved M and dissolved oxygen instead of the interaction pa...The deoxidation equilibrium of liquid steel was investigated from a new perspective. Dissolved associate MmOn was used to describe the interaction between dissolved M and dissolved oxygen instead of the interaction parameter of Wagner. The concentration of unassociated oxygen could be considered as the activity of oxygen. Or, the percentage of unassociated oxygen in the total dissolved oxygen was the activity coefficient of oxygen. When the content of deoxidizer was low, the dissolved oxygen was mainly composed of the unassociated oxygen, while more and more MxO formed with gradually increasing M content. The present model gave a good description to the aluminum deoxidation equilibrium after considering AlO and Al2O. Furthermore, the higher the con- tent of A1 was, the higher the content of Al2O relative to the content of AlO would be.展开更多
The element partitioning in a Pb-Bi concentrate oxygen-rich bath smelting process was studied using thermodynamic equilibrium simulation method. Effects of oxygen to feed ratio(OFR) and sulfur dioxide partial pressure...The element partitioning in a Pb-Bi concentrate oxygen-rich bath smelting process was studied using thermodynamic equilibrium simulation method. Effects of oxygen to feed ratio(OFR) and sulfur dioxide partial pressure(pSO2) on the partitionings of Bi, Pb, As, Sb, Cu and Ag were analyzed and compared with industrial data. The results suggested that the optimal OFR was between 6.3 and 6.8 kmol/t to maximize Bi, Pb, Cu and Ag partitioning in the metal phase. Further increase of OFR led to the drop of metal partitioning and increase of slag liquidus temperature. High pSO2 led to high deportment of Bi and Pb in the gas phase mainly in the form of sulfides, suggesting that a low pSO2 was conducive for reducing the dust ratio.展开更多
The interfacial oxygen transfer rate is one of the main factors to control the composition of alloys.The commonly employed method of studying the interfacial oxygen transfer rate is the chemical composition analysis;h...The interfacial oxygen transfer rate is one of the main factors to control the composition of alloys.The commonly employed method of studying the interfacial oxygen transfer rate is the chemical composition analysis;however,it is difficult to be studied in situ.Here,a new method of measuring the oxygen transfer rate at the gas-slag and slag-metal interfaces was reported based on electrochemical analyses.The interfacial oxygen transfer rate in the smelting process of Inconel 718 superalloy was investigated at 1723,1773,1823,and 1873 K.The experimental results show that the electrochemical method can measure the real-time oxygen content;hence,this method is promising in controlling the oxygen content in alloys.As the temperature increased,both the equilibrium oxygen content and the rate of oxygen absorption increased significantly,and the increase was the most obvious when the temperature was 1873 K.The possible reason is that the increase in temperature weakens the mass transfer resistance of the electric double layer at the interface,thus accelerating the oxygen transfer rate.展开更多
There are few mineral reaction experiments dealing with the stable isotope fractionation factors between the reaction products. The only known example is to determine oxygen isotope fractionations between quartz and m...There are few mineral reaction experiments dealing with the stable isotope fractionation factors between the reaction products. The only known example is to determine oxygen isotope fractionations between quartz and magnetite at 600 and 800℃ by oxidizing fayalite to form quartz and magnetite. This experimental result has been confirmed by the experiments of isotope exchange reaction. In this note, we report the results of an investigation of oxygen isotope fractionation between calcite展开更多
基金Project(51620105013)supported by the National Natural Science Foundation of China
文摘The SKS furnace is a horizontal cylindrical reactor similar to a Noranda furnace,however,the oxygen enriched air isblown into the furnace from the bottom.Mechanism model of the SKS process was developed by analyzing the smeltingcharacteristics deeply.In our model,the furnace section from top to bottom is divided into seven functional layers,i.e.,gas layer,mineral decomposition transitioning layer,slag layer,slag formation transitioning layer,matte formation transitioning layer,weakoxidizing layer and strong oxidizing layer.The furnace along the length direction is divided into three functional regions,that is,reaction region,separation transitioning region and liquid phase separation and settling region.These layers or regions play differentroles in the model in describing the mechanism of the smelting process.The SKS smelting is at a multiphase non-steady equilibriumstate,and the oxygen and sulfur potentials change gradually in the length and cross directions.The smelting capacity of the SKSprocess could be raised through reasonably controlling the potential values in different layers and regions.
基金the National Science Foundation of China(Nos.50934001 and 51322402)the National High-Tech Research and Development Program of China (No.2012AA062302)+2 种基金the Program of the Co-construction with Beijing Municipal Commission of Education of China (Nos.00012047 and 00012085)the Program for New Century Excellent Talents in Universities(NCET-11-0577)the Fundamental Research Funds for the Central Universities(No.FRF-AS-11-003A)
文摘TiClx （x=2.17） was prepared by using titanium sponge to reduce the concentration of TiCl4 in a NaCl-KCl melt under negative pressure. The as-prepared NaCl-KCl-TiClx melt was employed as the electrolyte, and two parallel crude titanium plates and one high-purity titanium plate were used as the anode and cathode, respectively. A series of electrochemical tests were performed to investigate the influence of electrolytic parameters on the current efficiency and quality of cathodic products. The results indicated that the quality of cathodic products was related to the current efficiency, which is significantly dependent on the current density and the initial concentration of titanium ions. The significance of this study is the attainment of high-purity titanium with a low oxygen content of 30× 10^-6.
基金supported by the National Natural Science Foundation of China(no.22372154,21972131).
文摘Despite substantial efforts in developing high-performance catalysts for the oxygen reduction reaction(ORR),the persistent challenge lies in the high onset overpotential of the ORR,and the effect of the elec-trolyte solution cannot be ignored.Consequently,we have systematically investigated the impact of adsorbate species and concentration,as well as solution pH,on the ORR activity on Pt(111)and Pt(poly)electrodes.The results all tend to establish a linear quantitative relationship between the onset potential for ORR and the adsorption equilibrium potential of the adsorbate.This finding indicates the decisive role of adsorbates in the onset potential for ORR,suggesting that the adsorption potential of adsorbates can serve as an intuitive criterion for ORR activity.Additional support for this conclusion is derived from experimental results obtained from the oxygen evolution reaction on Pt(poly)with different adsorbate species and from the hydrogen evolution reaction on Pt(111)with iodine adsorption.We further propose both an empirical equation for the onset potential for ORR and the concept of a potential-regulated adsor-bate shielding effect to elucidate the influence of adsorbates on ORR activity.This study provides new insights into the high onset overpotential of the ORR and offers potential strategies for predicting and enhancingORRactivity inthefuture.
基金Item Sponsored by National Natural Science Foundation of China(51304018)
文摘The deoxidation equilibrium of liquid steel was investigated from a new perspective. Dissolved associate MmOn was used to describe the interaction between dissolved M and dissolved oxygen instead of the interaction parameter of Wagner. The concentration of unassociated oxygen could be considered as the activity of oxygen. Or, the percentage of unassociated oxygen in the total dissolved oxygen was the activity coefficient of oxygen. When the content of deoxidizer was low, the dissolved oxygen was mainly composed of the unassociated oxygen, while more and more MxO formed with gradually increasing M content. The present model gave a good description to the aluminum deoxidation equilibrium after considering AlO and Al2O. Furthermore, the higher the con- tent of A1 was, the higher the content of Al2O relative to the content of AlO would be.
基金financial supports from the National Key R&D Program of China (2018YFC1901604)the Natural Science Foundation of Hunan Province,China (2018JJ3662)+1 种基金the China Scholarship Council (201706375005)the China Postdoctoral Science Foundation (2018M632988)。
文摘The element partitioning in a Pb-Bi concentrate oxygen-rich bath smelting process was studied using thermodynamic equilibrium simulation method. Effects of oxygen to feed ratio(OFR) and sulfur dioxide partial pressure(pSO2) on the partitionings of Bi, Pb, As, Sb, Cu and Ag were analyzed and compared with industrial data. The results suggested that the optimal OFR was between 6.3 and 6.8 kmol/t to maximize Bi, Pb, Cu and Ag partitioning in the metal phase. Further increase of OFR led to the drop of metal partitioning and increase of slag liquidus temperature. High pSO2 led to high deportment of Bi and Pb in the gas phase mainly in the form of sulfides, suggesting that a low pSO2 was conducive for reducing the dust ratio.
基金gratefully express their appreciation to National Natural Science Foundation of China(Nos.51974153 and U1960203)the Joint Fund of State Key Laboratory of Marine Engineering and University of Science and Technology Liaoning(SKLMEA-USTL-201707)the China Scholarship Council(201908210457).
文摘The interfacial oxygen transfer rate is one of the main factors to control the composition of alloys.The commonly employed method of studying the interfacial oxygen transfer rate is the chemical composition analysis;however,it is difficult to be studied in situ.Here,a new method of measuring the oxygen transfer rate at the gas-slag and slag-metal interfaces was reported based on electrochemical analyses.The interfacial oxygen transfer rate in the smelting process of Inconel 718 superalloy was investigated at 1723,1773,1823,and 1873 K.The experimental results show that the electrochemical method can measure the real-time oxygen content;hence,this method is promising in controlling the oxygen content in alloys.As the temperature increased,both the equilibrium oxygen content and the rate of oxygen absorption increased significantly,and the increase was the most obvious when the temperature was 1873 K.The possible reason is that the increase in temperature weakens the mass transfer resistance of the electric double layer at the interface,thus accelerating the oxygen transfer rate.
基金Study supported by funds from the German Science Foundation(DFG)the Universlty of ScienceTechology of China(USTC).
文摘There are few mineral reaction experiments dealing with the stable isotope fractionation factors between the reaction products. The only known example is to determine oxygen isotope fractionations between quartz and magnetite at 600 and 800℃ by oxidizing fayalite to form quartz and magnetite. This experimental result has been confirmed by the experiments of isotope exchange reaction. In this note, we report the results of an investigation of oxygen isotope fractionation between calcite
