The tight sandstone gas in Upper Paleozoic Formation of the northern Ordos Basin is a typical giant unconventional tight gas province. Evidences from geochemistry, reservoir geology and paleotectonic setting all verif...The tight sandstone gas in Upper Paleozoic Formation of the northern Ordos Basin is a typical giant unconventional tight gas province. Evidences from geochemistry, reservoir geology and paleotectonic setting all verify that the present-day tight sandstone gas accumulation in the Ordos Basin is the result of near-source accumulation. The evidences are listed as following： tight sandstone gas is mainly distributed in the area with high gas-generating strength; gas composition was not subjected tofractionation; gas saturation significantly decreases with the distance away from the source rocks; gas isotopes suggest their origin is the same and maturity is consistent with in-place source rocks; reservoirs have experienced three types of densification digenesis, including intense compaction, siliceous cementation and calcareous cementation, which took place before the formation of a large amount of tight sandstone gas, forming tight reservoirs with low porosity and permeability, fine pore throat and great capillary resistance; the paleo-structural gradient ratio is small from the main hydrocarbon generation period to present. It is indicated the present distribution of tight sandstone gas in the northern Ordos Basin is the result of near-source and short-distance migration and accumulation.展开更多
The new inversion algorithm developed based on the recent progress in thenonlinear programming study by us is used to invert the earthquake source process of Chi Chiearthquake M_w7.6, 20 Semptember,1999, Taiwan. A cur...The new inversion algorithm developed based on the recent progress in thenonlinear programming study by us is used to invert the earthquake source process of Chi Chiearthquake M_w7.6, 20 Semptember,1999, Taiwan. A curve fault model is constructed in our inversionto make the fault model close to the real rupturing fault to reduce the influence from thediscrepancy between the constructed fault model and the real rupturing fault. The results show that(1) the rupture process of the Chi Chi earthquake source lasted about 32 seconds and the mainfaulting occurred between 6th to 21st second after the start of the ruptures and the high slip areawere mainly located at the northern segment of the fault. (2) The slip was dominated by thrustfaulting. The average rake angle was 64.5°, which was very consistent with those inverted by USGS,Harvard and CWB (Central Weather Bureau of Taiwan). The amount of the moment inverted in this paperwas 7.76x10^(20) NM, which was a slightly bigger than those inverted by USGS and Harvard. (3) Aclear nucleation step existed in the source faulting process and it lasted about 6 seconds. Themoment release rate accelerated obviously at the end of the nucleation step. The faulting startedfrom the southern segment and mainly occurred at the northern segment after 10 seconds. At the endof this paper, we analyzed the reliability of the inversion result via comparing with the GPSobservations and discussed its scientific signification.展开更多
In the last twenty years, near-field problems became an important topic for both seismologists and civil engineers. The one aspect is to illuminate mechanisms of earthquakes and explain new phenomena. The another aspe...In the last twenty years, near-field problems became an important topic for both seismologists and civil engineers. The one aspect is to illuminate mechanisms of earthquakes and explain new phenomena. The another aspect is the ground motions, which are usually assigned by engineers as a type of input load for seismic design of structures, sometimes can control the final design results. The experiments, performance evaluations and other related aspects are all based on the specified type of load. As a result, many aspects related to civil engineering will be influenced by changes of the type of load, Hence, the characteristics of the load and the corresponding response of structures are desired for studying. In this paper, the state-of-the-art of near-field problems in civil engineering is comprehensively reviewed, which include inherent characteristics of near-field ground motions and influences of these ground motions on civil structures. The existing problems are pointed out and work needed to be further investigated in the future is suggested. It is believed that the information in this paper can be useful to advance the state of investigation on near-field problems.展开更多
An electromagnetic field is generated through the accelerating movement of two equal but opposite charges of a single dipole. An electromagnetic field can also be generated by a time-varying infinitesimal point charge...An electromagnetic field is generated through the accelerating movement of two equal but opposite charges of a single dipole. An electromagnetic field can also be generated by a time-varying infinitesimal point charge. In this study, a comparison between the electromagnetic fields of an infinitesimal point charge and a dipole has been presented. First, the time-domain potential function of a point source in a 3D conductive medium is derived. Then the electric and magnetic fields in a 3D homogeneous lossless space are derived via the relation between the potential and field. The field differences between the infinitesimal point charge and the dipole in the step-off time, far-source, and near-source zones are analyzed, and the accuracy of the solutions from these sources is investigated. It is also shown that the field of the infinitesimal point charge in the near-source zone is different from that of the dipole, whereas the far-source zone fields of these two sources are identical. The comparison of real and simulated data shows that the infinitesimal point charge represents the real source better than the divole source.展开更多
This paper proposes that on the basis of near-source saturation characteristic of ground motion, the peak ground motion acceleration and the acceleration response spectra of diffuse earthquakes affecting the nuclear f...This paper proposes that on the basis of near-source saturation characteristic of ground motion, the peak ground motion acceleration and the acceleration response spectra of diffuse earthquakes affecting the nuclear facility site can be determined by the statistic method. In view of the problem of insufficient statistic samples due to fewer qualified strong earth- quake records on the bedrock site, it also proposes that according to the features of ground motion response of the soil, the acceleration records on the soil site can be transformed into the equivalent acceleration records on rock site for a simultane- ous statistic analysis together with the records on rock site. Consequently, we have obtained by this method the near-source peak acceleration and the acceleration response spectra of small and moderate earthquakes on the site that could meet the need of nuclear facility and made a comparative analysis to the results from relevant researches. This new method for deter- mining diffuse earthquakes is only preliminarily verified in the paper and further research is needed for practical application.展开更多
The South Yellow Sea Basin(SYSB) has multiple sets of proven source rocks and good hydrocarbon prospects,but no industrial oil and gas has been explored at present.To solve this puzzle for petroleum geologists,we syst...The South Yellow Sea Basin(SYSB) has multiple sets of proven source rocks and good hydrocarbon prospects,but no industrial oil and gas has been explored at present.To solve this puzzle for petroleum geologists,we systematically investigated the marine hydrocarbon geological conditions based on cores and testing data from borehole CSDP-2,the first exploration well with continuous coring in SYSB.The qualities of source rocks are evaluated in detail according to organic matter abundance,type,and maturity.The reservoir characterization mainly includes porosity,permeability,and reservoir space.Displacement pressure test and stratum thickness are the main foundations for defining the caprocks.Then,the oil-source rock correlation in the Permian and stratum model are analyzed to determine the favorable source-reservoir-caprock assemblages.The results show that three sets of effective source rocks(the Lower Triassic,Upper Permian,and Lower Permian),two sets of tight sandstone re servoirs(the Upper Permian and Lower Silurian-Upper Devonian),and two sets of caprocks(the Lower Triassic and Carboniferous) combine to constitute the hydrocarbon reservoir-forming as se mblages of "lower-ge neration and upper-accumlation" and "self-generation and self-accumlation",thus laying a solid foundation for promising petroleum prospects.The three sets of marine source rocks are characterized by successive generation and expulsion stages,which guarantees multistage hydrocarbon accumulation.Another three sets of continental source rocks distributed across the Middle Jurassic,Upper Cretaceous,and Paleogene depression areas,especially in the Northern Depression,may supplement some hydrocarbons for the Central Uplift through faults and the Indosinian unconformity.The favorable Permian exploration strata have been identified in the Central Uplift of SYSB.First,the Lower Permian and Upper Permian source rocks with high organic matter abundance and high thermal maturity supply sufficient hydrocarbons.Secondly,the interbedding relationship between展开更多
Nonlinear response history analyses and use of strong ground motion data including near-field effects has become a common practice in both performance based design of tall buildings and design of base-isolated buildin...Nonlinear response history analyses and use of strong ground motion data including near-field effects has become a common practice in both performance based design of tall buildings and design of base-isolated buildings. On the other hand, ordinary buildings are commonly analysed via response spectrum analysis following the rules of conventional seismic codes, most of which do not take near-field effects into account. This study evaluates the necessity and the adequacy of near-source factors for ordinary fixed-base buildings that are not specifically classified as tall, by comparing dynamic responses of 3, 8, and 15-story benchmark buildings obtained via （1） linear time history analyses using 220 record components from 13 historical earthquakes and 45 synthetic earthquake records of different magnitudes and fault distances and （2） response spectrum analyses in accordance with the Turkish Earthquake Code 2007 -representing seismic codes not taking near-field effects into account- and the Uniform Building Code 1997 which takes near-field effects into account via near-source factors that amplify design response spectrum. It is shown that near-source factors are crucial for the safe design of not-so-tall ordinary fixed-base buildings but those defined in UBC97 may still not be adequate for those located in the vicinity of the fault.展开更多
Follow Chen and Duda's model of spectral fall-off of ω~3, the dependence of peak parameters of ground motion, peak displacement d_m, peak velocity vin and peak acceleration a_m, upon the environment stress τ_o-v...Follow Chen and Duda's model of spectral fall-off of ω~3, the dependence of peak parameters of ground motion, peak displacement d_m, peak velocity vin and peak acceleration a_m, upon the environment stress τ_o-values are studied using near source seismic digital recordings for the sequence of the Wuding, Yunnan, M = 6.5 earthquake, in which, as a new thought, the peak parameters are assumed to be related to the medium Q-value. Three formulae for estimating the environment stress τ_o-values by the peak parameters of three types of ground motions are derived. Using these formulae, the environment stress τ_o-values are calculated for the sequence of the Wuding earthquake. The result show that τ_o-values calculated by the three formulae are constant largely, the averages of τ_o are in the range of 5.0-35 MPa for most earthquakes. It belongs to the high-stress earthquakes sequence: the high-stress values are restricted to the relatively small area closely near to the epicenter of the main shock. The fine distribu tion structure for the contours of the environment stress τ_o-values is related closely to the strong aftershocks. The analysis of spatial and temporal feature of To-values suggests that the earthquakes sequence in a rupture process generated at the specific intersection zone of seismo-tectonics under high-stress background.展开更多
Moment tensor inversion was carried out for small and moderate earthquakes with near-source broadband data recorded by a temporal small-aperture network consisting of three component accelerographs. Accelerograms were...Moment tensor inversion was carried out for small and moderate earthquakes with near-source broadband data recorded by a temporal small-aperture network consisting of three component accelerographs. Accelerograms were integrated twice to produce displacement seismograms and filtered by a Butterworth band-pass filter. Green's functions were calculated for a homogeneous semi-infinite elastic medium in the inversion. Direct P,S and converted SP phases were identified for the inversion with reference to the synthetic seismograms. Through the moment tensor inversion it is demonstrated that with very simple structure model and selected phases, one is able to retrieve the source mechanism and the seismic moment for small events, andthe source mechanism for moderate events. It is also demonstrated that the technique described in this studyis convenient for the determination of source mechanismal and stress state in dealing with numbers of small andmoderate earthquakes without detailed knowledge about the structure. As an application of the present technique, moment tensors of 15 aftershocks of the Ms 6. 1 earthquake occurred on April 18, 1985 in Luquan,Yunnan Province, China were retrieved. The inversion results show that these events can be reasonably modeled by a predominant double couple. It can be found from the distribution of principal stress axes and the average moment tensor that the pressure axis in this area lies horizontally in the NNW direction, which is consistent with the results obtained from previous studies. It implies that the occurrence of the Luquan earthquake sequence is tectonically related to the relative collision motion between the Indian and Eurasian Plates.展开更多
Three methods of extracting the information of anomalies of a precursory group are put forward, i.e., the mathematical analyses of the synthetic information of earthquake precursors (S), the inhomogeneous degree of pr...Three methods of extracting the information of anomalies of a precursory group are put forward, i.e., the mathematical analyses of the synthetic information of earthquake precursors (S), the inhomogeneous degree of precursory groups (ID) and the values of short-term and impending anomaly in near-source area (NS). Using these methods, we calculate the observational data of deformation, underground fluid and hydrochemical constituents obtained from different seismic stations in the Sichuan-Yunnan region and conclude that the synthetic precursory anomalies of a single strong earthquake with M S6.0 differ greatly from those of the grouped strong earthquakes, for the anomalous information of precursory groups are more abundant. The three methods of extracting the synthetic precursory anomaly and the related numerical results can be applied into the practice of prediction to the grouped strong earthquakes in the Sichuan-Yunnan region. Inhomogeneous degree (ID) of synthetic precursory anomaly can be identified automatically because it takes the threshold of distributive characteristics of the anomalies of precursory group as its criterion for anomaly.展开更多
基金supported by the National Key Basic Research and Development Program(973 Program),China(grant No.2014CB239000)China National Science and Technology Major Project(grant No.2016ZX05046)
文摘The tight sandstone gas in Upper Paleozoic Formation of the northern Ordos Basin is a typical giant unconventional tight gas province. Evidences from geochemistry, reservoir geology and paleotectonic setting all verify that the present-day tight sandstone gas accumulation in the Ordos Basin is the result of near-source accumulation. The evidences are listed as following： tight sandstone gas is mainly distributed in the area with high gas-generating strength; gas composition was not subjected tofractionation; gas saturation significantly decreases with the distance away from the source rocks; gas isotopes suggest their origin is the same and maturity is consistent with in-place source rocks; reservoirs have experienced three types of densification digenesis, including intense compaction, siliceous cementation and calcareous cementation, which took place before the formation of a large amount of tight sandstone gas, forming tight reservoirs with low porosity and permeability, fine pore throat and great capillary resistance; the paleo-structural gradient ratio is small from the main hydrocarbon generation period to present. It is indicated the present distribution of tight sandstone gas in the northern Ordos Basin is the result of near-source and short-distance migration and accumulation.
基金supported by the National Natural Science Foundation of China(Grant No.40134010)the National Basic Research Program of China(Grant No.2004CB41804).
文摘The new inversion algorithm developed based on the recent progress in thenonlinear programming study by us is used to invert the earthquake source process of Chi Chiearthquake M_w7.6, 20 Semptember,1999, Taiwan. A curve fault model is constructed in our inversionto make the fault model close to the real rupturing fault to reduce the influence from thediscrepancy between the constructed fault model and the real rupturing fault. The results show that(1) the rupture process of the Chi Chi earthquake source lasted about 32 seconds and the mainfaulting occurred between 6th to 21st second after the start of the ruptures and the high slip areawere mainly located at the northern segment of the fault. (2) The slip was dominated by thrustfaulting. The average rake angle was 64.5°, which was very consistent with those inverted by USGS,Harvard and CWB (Central Weather Bureau of Taiwan). The amount of the moment inverted in this paperwas 7.76x10^(20) NM, which was a slightly bigger than those inverted by USGS and Harvard. (3) Aclear nucleation step existed in the source faulting process and it lasted about 6 seconds. Themoment release rate accelerated obviously at the end of the nucleation step. The faulting startedfrom the southern segment and mainly occurred at the northern segment after 10 seconds. At the endof this paper, we analyzed the reliability of the inversion result via comparing with the GPSobservations and discussed its scientific signification.
基金National Natural Science Foundation of China (50538050, 50608024)
文摘In the last twenty years, near-field problems became an important topic for both seismologists and civil engineers. The one aspect is to illuminate mechanisms of earthquakes and explain new phenomena. The another aspect is the ground motions, which are usually assigned by engineers as a type of input load for seismic design of structures, sometimes can control the final design results. The experiments, performance evaluations and other related aspects are all based on the specified type of load. As a result, many aspects related to civil engineering will be influenced by changes of the type of load, Hence, the characteristics of the load and the corresponding response of structures are desired for studying. In this paper, the state-of-the-art of near-field problems in civil engineering is comprehensively reviewed, which include inherent characteristics of near-field ground motions and influences of these ground motions on civil structures. The existing problems are pointed out and work needed to be further investigated in the future is suggested. It is believed that the information in this paper can be useful to advance the state of investigation on near-field problems.
基金supported by Chinese National Programs for Fundamental Research and Development(No.2012CB416605)the National Natural Science Foundation of China(No.41174090)Development Project of National Key Scientific Equipment(No.ZDYZ2012-1-05-04)
文摘An electromagnetic field is generated through the accelerating movement of two equal but opposite charges of a single dipole. An electromagnetic field can also be generated by a time-varying infinitesimal point charge. In this study, a comparison between the electromagnetic fields of an infinitesimal point charge and a dipole has been presented. First, the time-domain potential function of a point source in a 3D conductive medium is derived. Then the electric and magnetic fields in a 3D homogeneous lossless space are derived via the relation between the potential and field. The field differences between the infinitesimal point charge and the dipole in the step-off time, far-source, and near-source zones are analyzed, and the accuracy of the solutions from these sources is investigated. It is also shown that the field of the infinitesimal point charge in the near-source zone is different from that of the dipole, whereas the far-source zone fields of these two sources are identical. The comparison of real and simulated data shows that the infinitesimal point charge represents the real source better than the divole source.
基金supported by the Special Funds for Sciences and Technology Research (No. 200708003 and No. 200808008)National Natural Science Foundation of China (No. 90715020)
文摘This paper proposes that on the basis of near-source saturation characteristic of ground motion, the peak ground motion acceleration and the acceleration response spectra of diffuse earthquakes affecting the nuclear facility site can be determined by the statistic method. In view of the problem of insufficient statistic samples due to fewer qualified strong earth- quake records on the bedrock site, it also proposes that according to the features of ground motion response of the soil, the acceleration records on the soil site can be transformed into the equivalent acceleration records on rock site for a simultane- ous statistic analysis together with the records on rock site. Consequently, we have obtained by this method the near-source peak acceleration and the acceleration response spectra of small and moderate earthquakes on the site that could meet the need of nuclear facility and made a comparative analysis to the results from relevant researches. This new method for deter- mining diffuse earthquakes is only preliminarily verified in the paper and further research is needed for practical application.
基金the National Natural Science Foundation of China(Nos.41906188,41806057,41776081)the National Marine Geology Project of China(Nos.DD20160147,DD20190365)+1 种基金the National Program on Global Change and Air-Sea Interaction(No.GASI-GEOGE-02)the Special Fund for the Taishan Scholar Program of Shandong Province(No.ts201511061)。
文摘The South Yellow Sea Basin(SYSB) has multiple sets of proven source rocks and good hydrocarbon prospects,but no industrial oil and gas has been explored at present.To solve this puzzle for petroleum geologists,we systematically investigated the marine hydrocarbon geological conditions based on cores and testing data from borehole CSDP-2,the first exploration well with continuous coring in SYSB.The qualities of source rocks are evaluated in detail according to organic matter abundance,type,and maturity.The reservoir characterization mainly includes porosity,permeability,and reservoir space.Displacement pressure test and stratum thickness are the main foundations for defining the caprocks.Then,the oil-source rock correlation in the Permian and stratum model are analyzed to determine the favorable source-reservoir-caprock assemblages.The results show that three sets of effective source rocks(the Lower Triassic,Upper Permian,and Lower Permian),two sets of tight sandstone re servoirs(the Upper Permian and Lower Silurian-Upper Devonian),and two sets of caprocks(the Lower Triassic and Carboniferous) combine to constitute the hydrocarbon reservoir-forming as se mblages of "lower-ge neration and upper-accumlation" and "self-generation and self-accumlation",thus laying a solid foundation for promising petroleum prospects.The three sets of marine source rocks are characterized by successive generation and expulsion stages,which guarantees multistage hydrocarbon accumulation.Another three sets of continental source rocks distributed across the Middle Jurassic,Upper Cretaceous,and Paleogene depression areas,especially in the Northern Depression,may supplement some hydrocarbons for the Central Uplift through faults and the Indosinian unconformity.The favorable Permian exploration strata have been identified in the Central Uplift of SYSB.First,the Lower Permian and Upper Permian source rocks with high organic matter abundance and high thermal maturity supply sufficient hydrocarbons.Secondly,the interbedding relationship between
文摘Nonlinear response history analyses and use of strong ground motion data including near-field effects has become a common practice in both performance based design of tall buildings and design of base-isolated buildings. On the other hand, ordinary buildings are commonly analysed via response spectrum analysis following the rules of conventional seismic codes, most of which do not take near-field effects into account. This study evaluates the necessity and the adequacy of near-source factors for ordinary fixed-base buildings that are not specifically classified as tall, by comparing dynamic responses of 3, 8, and 15-story benchmark buildings obtained via （1） linear time history analyses using 220 record components from 13 historical earthquakes and 45 synthetic earthquake records of different magnitudes and fault distances and （2） response spectrum analyses in accordance with the Turkish Earthquake Code 2007 -representing seismic codes not taking near-field effects into account- and the Uniform Building Code 1997 which takes near-field effects into account via near-source factors that amplify design response spectrum. It is shown that near-source factors are crucial for the safe design of not-so-tall ordinary fixed-base buildings but those defined in UBC97 may still not be adequate for those located in the vicinity of the fault.
文摘Follow Chen and Duda's model of spectral fall-off of ω~3, the dependence of peak parameters of ground motion, peak displacement d_m, peak velocity vin and peak acceleration a_m, upon the environment stress τ_o-values are studied using near source seismic digital recordings for the sequence of the Wuding, Yunnan, M = 6.5 earthquake, in which, as a new thought, the peak parameters are assumed to be related to the medium Q-value. Three formulae for estimating the environment stress τ_o-values by the peak parameters of three types of ground motions are derived. Using these formulae, the environment stress τ_o-values are calculated for the sequence of the Wuding earthquake. The result show that τ_o-values calculated by the three formulae are constant largely, the averages of τ_o are in the range of 5.0-35 MPa for most earthquakes. It belongs to the high-stress earthquakes sequence: the high-stress values are restricted to the relatively small area closely near to the epicenter of the main shock. The fine distribu tion structure for the contours of the environment stress τ_o-values is related closely to the strong aftershocks. The analysis of spatial and temporal feature of To-values suggests that the earthquakes sequence in a rupture process generated at the specific intersection zone of seismo-tectonics under high-stress background.
文摘Moment tensor inversion was carried out for small and moderate earthquakes with near-source broadband data recorded by a temporal small-aperture network consisting of three component accelerographs. Accelerograms were integrated twice to produce displacement seismograms and filtered by a Butterworth band-pass filter. Green's functions were calculated for a homogeneous semi-infinite elastic medium in the inversion. Direct P,S and converted SP phases were identified for the inversion with reference to the synthetic seismograms. Through the moment tensor inversion it is demonstrated that with very simple structure model and selected phases, one is able to retrieve the source mechanism and the seismic moment for small events, andthe source mechanism for moderate events. It is also demonstrated that the technique described in this studyis convenient for the determination of source mechanismal and stress state in dealing with numbers of small andmoderate earthquakes without detailed knowledge about the structure. As an application of the present technique, moment tensors of 15 aftershocks of the Ms 6. 1 earthquake occurred on April 18, 1985 in Luquan,Yunnan Province, China were retrieved. The inversion results show that these events can be reasonably modeled by a predominant double couple. It can be found from the distribution of principal stress axes and the average moment tensor that the pressure axis in this area lies horizontally in the NNW direction, which is consistent with the results obtained from previous studies. It implies that the occurrence of the Luquan earthquake sequence is tectonically related to the relative collision motion between the Indian and Eurasian Plates.
文摘Three methods of extracting the information of anomalies of a precursory group are put forward, i.e., the mathematical analyses of the synthetic information of earthquake precursors (S), the inhomogeneous degree of precursory groups (ID) and the values of short-term and impending anomaly in near-source area (NS). Using these methods, we calculate the observational data of deformation, underground fluid and hydrochemical constituents obtained from different seismic stations in the Sichuan-Yunnan region and conclude that the synthetic precursory anomalies of a single strong earthquake with M S6.0 differ greatly from those of the grouped strong earthquakes, for the anomalous information of precursory groups are more abundant. The three methods of extracting the synthetic precursory anomaly and the related numerical results can be applied into the practice of prediction to the grouped strong earthquakes in the Sichuan-Yunnan region. Inhomogeneous degree (ID) of synthetic precursory anomaly can be identified automatically because it takes the threshold of distributive characteristics of the anomalies of precursory group as its criterion for anomaly.
