A new thermal ring-opening polymerization technique for 1, 1, 3, 3-tetra-ph enyl-1, 3-disilacyclobutane （TPDC） based on the use of metal nanoparticles produced by pulsed laser ablation was investigated. This method ...A new thermal ring-opening polymerization technique for 1, 1, 3, 3-tetra-ph enyl-1, 3-disilacyclobutane （TPDC） based on the use of metal nanoparticles produced by pulsed laser ablation was investigated. This method facilitates the synthesis of polydiphenysilylenemethyle （PDPhSM） thin film, which is difficult to make by conventional methods because of its insolubility and high melting point. TPDC was first evaporated on silicon substrates and then exposed to metal nanoparticles deposition by pulsed laser ablation prior to heat treatment.The TPDC films with metal nanoparticles were heated in an electric furnace in air atmosphere to induce ring-opening polymerization of TPDC. The film thicknesses before and after polymerization were measured by a stylus profilometer. Since the polymerization process competes with re-evaporation of TPDC during the heating, the thickness ratio of the polymer to the monomer was defined as the polymerization efficiency, which depends greatly on the technology conditions. Therefore, a well trained radial base function neural network model was constructed to approach the complex nonlinear relationship. Moreover, a particle swarm algorithm was firstly introduced to search for an optimum technology directly from RBF neural network model. This ensures that the fabrication of thin film with appropriate properties using pulsed laser ablation requires no in-depth understanding of the entire behavior of the technology conditions.展开更多
InP nanoparticles embedded in SiO2 thin films were prepared by radio-frequency magnetron co-sputtering. We analyzed the structure and growth behavior of the composite films under different preparation conditions. X-ra...InP nanoparticles embedded in SiO2 thin films were prepared by radio-frequency magnetron co-sputtering. We analyzed the structure and growth behavior of the composite films under different preparation conditions. X-ray diffraction and Raman spectroscopy analyses indicate that InP nanoparticles have a polycrystalline structure. The average size of InP nanoparticles is in the range of 3-10 nm. The broadening and red shift of the Raman peaks were observed, which can be interpreted by the phonon confinement model. Optical transmission spectra indicate that the opticalabsorption edges of the films can be modulated in the visible light range. The marked blue shift of the absorption edge with respect to that of bulk InP is explained by the quantum confinement effect. The theoretical values of the blue shift predicted by the effective mass approximation model are different from the experimental results for the InP-SiO2 system. Analyses indicate that the exciton effective mass of the InP nanoparticles is not展开更多
采用磁控溅射法在硅基片上制备了Co原子分数为13.0%的Co-C纳米复合薄膜.在真空条件下,对薄膜进行退火处理,退火温度从473K逐步提高至773K,保温时间30min.形貌观察表明,未经退火处理的薄膜中,Co颗粒均匀分布在非晶C基体中,Co颗粒尺寸为1....采用磁控溅射法在硅基片上制备了Co原子分数为13.0%的Co-C纳米复合薄膜.在真空条件下,对薄膜进行退火处理,退火温度从473K逐步提高至773K,保温时间30min.形貌观察表明,未经退火处理的薄膜中,Co颗粒均匀分布在非晶C基体中,Co颗粒尺寸为1.5-3.0nm;673K退火后,Co颗粒尺寸增大.磁性能测试表明,未经退火处理的薄膜磁性较弱,随着退火温度升高,薄膜的磁化强度和矫顽力均明显增大;当退火温度增加至673—773K时,薄膜呈现出低温铁磁性、室温超顺磁性的典型颗粒体系磁性特征.磁输运特性研究表明,未经退火处理的薄膜在温度为4.2K,磁场为3980kA/m时表现出1.33%的负磁电阻,随着退火温度升高,样品磁电阻值下降;电阻与温度关系在4.2—60K范围内符合lnR-T^(-1/4)线性关系,磁输运遵循变程跳跃(variable range hopping)传导机制.展开更多
基金Funded by the Zhejiang Provincial Natural Science Foundation of China(No.R405031)Jiaxing Science Planning Project(2009 2007)the Educa-tion Department of Zhejiang Province (No.20051441)
文摘A new thermal ring-opening polymerization technique for 1, 1, 3, 3-tetra-ph enyl-1, 3-disilacyclobutane （TPDC） based on the use of metal nanoparticles produced by pulsed laser ablation was investigated. This method facilitates the synthesis of polydiphenysilylenemethyle （PDPhSM） thin film, which is difficult to make by conventional methods because of its insolubility and high melting point. TPDC was first evaporated on silicon substrates and then exposed to metal nanoparticles deposition by pulsed laser ablation prior to heat treatment.The TPDC films with metal nanoparticles were heated in an electric furnace in air atmosphere to induce ring-opening polymerization of TPDC. The film thicknesses before and after polymerization were measured by a stylus profilometer. Since the polymerization process competes with re-evaporation of TPDC during the heating, the thickness ratio of the polymer to the monomer was defined as the polymerization efficiency, which depends greatly on the technology conditions. Therefore, a well trained radial base function neural network model was constructed to approach the complex nonlinear relationship. Moreover, a particle swarm algorithm was firstly introduced to search for an optimum technology directly from RBF neural network model. This ensures that the fabrication of thin film with appropriate properties using pulsed laser ablation requires no in-depth understanding of the entire behavior of the technology conditions.
基金the National Climbing Program: Nanomaterial Science (Grant No. 95A-07).
文摘InP nanoparticles embedded in SiO2 thin films were prepared by radio-frequency magnetron co-sputtering. We analyzed the structure and growth behavior of the composite films under different preparation conditions. X-ray diffraction and Raman spectroscopy analyses indicate that InP nanoparticles have a polycrystalline structure. The average size of InP nanoparticles is in the range of 3-10 nm. The broadening and red shift of the Raman peaks were observed, which can be interpreted by the phonon confinement model. Optical transmission spectra indicate that the opticalabsorption edges of the films can be modulated in the visible light range. The marked blue shift of the absorption edge with respect to that of bulk InP is explained by the quantum confinement effect. The theoretical values of the blue shift predicted by the effective mass approximation model are different from the experimental results for the InP-SiO2 system. Analyses indicate that the exciton effective mass of the InP nanoparticles is not
文摘采用磁控溅射法在硅基片上制备了Co原子分数为13.0%的Co-C纳米复合薄膜.在真空条件下,对薄膜进行退火处理,退火温度从473K逐步提高至773K,保温时间30min.形貌观察表明,未经退火处理的薄膜中,Co颗粒均匀分布在非晶C基体中,Co颗粒尺寸为1.5-3.0nm;673K退火后,Co颗粒尺寸增大.磁性能测试表明,未经退火处理的薄膜磁性较弱,随着退火温度升高,薄膜的磁化强度和矫顽力均明显增大;当退火温度增加至673—773K时,薄膜呈现出低温铁磁性、室温超顺磁性的典型颗粒体系磁性特征.磁输运特性研究表明,未经退火处理的薄膜在温度为4.2K,磁场为3980kA/m时表现出1.33%的负磁电阻,随着退火温度升高,样品磁电阻值下降;电阻与温度关系在4.2—60K范围内符合lnR-T^(-1/4)线性关系,磁输运遵循变程跳跃(variable range hopping)传导机制.
