Our previous studies suggested that redox reaction proceeded separately on specific exposed crystal faces of TiO2 nanoparticles. Site-selective deposition of metal or metal oxide on TiO2 specific exposed crystal faces...Our previous studies suggested that redox reaction proceeded separately on specific exposed crystal faces of TiO2 nanoparticles. Site-selective deposition of metal or metal oxide on TiO2 specific exposed crystal faces successfully proceeded using the unique reactivity properties on the surface of TiO2 nanoparticles under photoexcitation. A remarkable improvement ofphotocatalytic activity of shape- controlled brookite and rutile TiO2 nanorods with modification of Fe^3＋ compounds was observed under visible light. Crystal face-selective metal compound modification on exposed crystal faces of TiO2 nanorods with brookite and futile phases was successfully prepared. Brookite and rutile TiO2 nanorods prepared by site-selective modification with metal compounds should be ideal visible-light responsive TiO2 photocatalysts because of the remarkable suppression of back electron transfer from TiO2 to oxidized metal com- pounds on the surface of the TiO2 nanorod with a brookite or rutile phase. In this paper, the development of exposed crystal face-controlled TiO2 nanorods with rutile and brookite phases was described. The obtained rutile and brookite TiO2 nanorod, showing remarkably high activity for degra- dation of organic compounds compared with the photocatalytic activities of anatase fine particles （ST-01）, is one of the most active commercially available photocatalysts for environmental cleanup in Japan. The technology of visiblelight responsive treatment for morphology-controlled rutile and brookite TiO2 nanorods by crystal face-selective modification of Fe^3＋ compounds was also discussed in this paper. The Fe^3＋ compound-modified rutile and brookite TiO2 nanorods show much higher activity than conventional visible-light responsive N-doped TiO2, which is commercially available in Japan.展开更多
The distribution of water channels in the crystal morphology of type-α hemi-hydrated gypsum(α-HH) was theoretically detected to investigate the effect of water channels on the hydration reactivity of hemi-hydrate ph...The distribution of water channels in the crystal morphology of type-α hemi-hydrated gypsum(α-HH) was theoretically detected to investigate the effect of water channels on the hydration reactivity of hemi-hydrate phosphogypsum(HPG). Results showed that water channels were mainly distributed in the cylinders of α-HH crystal,whereas no water channel existed in the conical surfaces parallel to the z-axis. Increasing the number of water channels was critical to enhance the hydration activity of HPG compared with the hydration reactivity of industrial HPG and type-α high-strength gypsum. Controlling the technological parameters of crystallization by concentration of liquid-phase SO_4^(2-) made it possible to obtain HPG which had the stumpy crystals of α-HH and high hydration reactivity.展开更多
The solution-phase synthesis by chemical transformation from reactive templates has proved to be very effective in morphology-controlled synthesis of inorganic nanostructures. This review paper summarizes the recent p...The solution-phase synthesis by chemical transformation from reactive templates has proved to be very effective in morphology-controlled synthesis of inorganic nanostructures. This review paper summarizes the recent progress in solution-phase synthesis of one-dimensional and hollow inorganic nanostructures via reactive templates, focusing on the approaches developed in our lab. The formation mechanisms based on reactive templates are discussed in depth to show the general concepts for the preparation processes. An outlook on the future development in this area is also presented.展开更多
Aluminum nitride （AIN） nanowires, serrated nanoribbons, and nanoribbons were selectively obtained through a simple chloride assisted chemical vapor deposition process. The morphologies of the products could be contr...Aluminum nitride （AIN） nanowires, serrated nanoribbons, and nanoribbons were selectively obtained through a simple chloride assisted chemical vapor deposition process. The morphologies of the products could be controlled by adjusting the deposition position and the flux of the reactant gas. The morphologies and structures of the AIN products were investigated in detail. The formation mechanism of the as-prepared different morphologies of AIN one-dimensional （ID） nanostructures was discussed on the basis of the experimental results.展开更多
A novel and simple strategy of morphology-controlled Sr Ti O3（ST） micro-scale particle synthesis by the flux method is reported. Systematic experiments are designed to realize the tunable morphologies of the particl...A novel and simple strategy of morphology-controlled Sr Ti O3（ST） micro-scale particle synthesis by the flux method is reported. Systematic experiments are designed to realize the tunable morphologies of the particles when the flux salt,sintering process, and the precursors are changed. The ST plates can be synthesized by plate-like Bi4Ti3O12（BIT） precursors in Na Cl flux. However, the as-synthesized Bi4Ti3O12 grains transform into reticular particles and finally into rods at higher temperature in Na Cl and KCl compounds. Besides, cubic ST particles are also prepared using different precursors as a comparative experiment. This study provides a strategy for further investigations in designing the morphology-controlled particles and efficient anisotropic materials of perovskite structure such as ferroelectric and photocatalyst.展开更多
The controllable synthesis of tantalate K1.9Na0.1Ta2O6·2H2O has been successfully achieved by a two-step technique,namely,the molten salt and hydrothermal methods,at a low temperature. By simply varying the KOH c...The controllable synthesis of tantalate K1.9Na0.1Ta2O6·2H2O has been successfully achieved by a two-step technique,namely,the molten salt and hydrothermal methods,at a low temperature. By simply varying the KOH concentration in the hydrothermal process,K1.9Na0.1Ta2O6·2H2O particles with spherical,cuboctahedral,and durian-like morphologies were synthesized. The photocatalytic activity of the obtained samples for the degradation of rhodamine B was studied under ultraviolet light,which indicates that the photocatalytic properties of the samples are highly dependent on their morphologies. The K1.9Na0.1Ta2O6·2H2O nanospheres,with rough surfaces and the highest specific surface area,exhibit the best performance. The present work provides a unique approach for the controlled synthesis of tantalate photocatalysts,which are difficult to achieve through other synthetic approaches.展开更多
基金financially supported by the Advanced Catalytic Transformation Program for Carbon Utilization(ACT-C)Japan Science and Technology Agency(JST)
文摘Our previous studies suggested that redox reaction proceeded separately on specific exposed crystal faces of TiO2 nanoparticles. Site-selective deposition of metal or metal oxide on TiO2 specific exposed crystal faces successfully proceeded using the unique reactivity properties on the surface of TiO2 nanoparticles under photoexcitation. A remarkable improvement ofphotocatalytic activity of shape- controlled brookite and rutile TiO2 nanorods with modification of Fe^3＋ compounds was observed under visible light. Crystal face-selective metal compound modification on exposed crystal faces of TiO2 nanorods with brookite and futile phases was successfully prepared. Brookite and rutile TiO2 nanorods prepared by site-selective modification with metal compounds should be ideal visible-light responsive TiO2 photocatalysts because of the remarkable suppression of back electron transfer from TiO2 to oxidized metal com- pounds on the surface of the TiO2 nanorod with a brookite or rutile phase. In this paper, the development of exposed crystal face-controlled TiO2 nanorods with rutile and brookite phases was described. The obtained rutile and brookite TiO2 nanorod, showing remarkably high activity for degra- dation of organic compounds compared with the photocatalytic activities of anatase fine particles （ST-01）, is one of the most active commercially available photocatalysts for environmental cleanup in Japan. The technology of visiblelight responsive treatment for morphology-controlled rutile and brookite TiO2 nanorods by crystal face-selective modification of Fe^3＋ compounds was also discussed in this paper. The Fe^3＋ compound-modified rutile and brookite TiO2 nanorods show much higher activity than conventional visible-light responsive N-doped TiO2, which is commercially available in Japan.
基金Supported by the Guizhou Province Fund Project(2014)7618
文摘The distribution of water channels in the crystal morphology of type-α hemi-hydrated gypsum(α-HH) was theoretically detected to investigate the effect of water channels on the hydration reactivity of hemi-hydrate phosphogypsum(HPG). Results showed that water channels were mainly distributed in the cylinders of α-HH crystal,whereas no water channel existed in the conical surfaces parallel to the z-axis. Increasing the number of water channels was critical to enhance the hydration activity of HPG compared with the hydration reactivity of industrial HPG and type-α high-strength gypsum. Controlling the technological parameters of crystallization by concentration of liquid-phase SO_4^(2-) made it possible to obtain HPG which had the stumpy crystals of α-HH and high hydration reactivity.
基金supported by the National Natural Science Foundation of China (Grant Nos. 20873002, 20673007, 20633010, and 50821061)MOST (Grant No. 2007CB936201)SRFDP (Grant No. 20070001018)
文摘The solution-phase synthesis by chemical transformation from reactive templates has proved to be very effective in morphology-controlled synthesis of inorganic nanostructures. This review paper summarizes the recent progress in solution-phase synthesis of one-dimensional and hollow inorganic nanostructures via reactive templates, focusing on the approaches developed in our lab. The formation mechanisms based on reactive templates are discussed in depth to show the general concepts for the preparation processes. An outlook on the future development in this area is also presented.
基金the National Natural Science Foundation of China under grant Nos.10674138 and 20571022.
文摘Aluminum nitride （AIN） nanowires, serrated nanoribbons, and nanoribbons were selectively obtained through a simple chloride assisted chemical vapor deposition process. The morphologies of the products could be controlled by adjusting the deposition position and the flux of the reactant gas. The morphologies and structures of the AIN products were investigated in detail. The formation mechanism of the as-prepared different morphologies of AIN one-dimensional （ID） nanostructures was discussed on the basis of the experimental results.
基金Project supported by the National Natural Science Foundation of China(Grant No.11404004)
文摘A novel and simple strategy of morphology-controlled Sr Ti O3（ST） micro-scale particle synthesis by the flux method is reported. Systematic experiments are designed to realize the tunable morphologies of the particles when the flux salt,sintering process, and the precursors are changed. The ST plates can be synthesized by plate-like Bi4Ti3O12（BIT） precursors in Na Cl flux. However, the as-synthesized Bi4Ti3O12 grains transform into reticular particles and finally into rods at higher temperature in Na Cl and KCl compounds. Besides, cubic ST particles are also prepared using different precursors as a comparative experiment. This study provides a strategy for further investigations in designing the morphology-controlled particles and efficient anisotropic materials of perovskite structure such as ferroelectric and photocatalyst.
基金National Natural Science Foundation of China(51072008,51172006)the Natural Science Foundation of Beijing(2102006)+2 种基金the Project of New Star of Science and Technology of Beijing(2007A014)the Funding Project for Academic Human Resources Development in Institutions of Higher Learning under the Jurisdiction of Beijing Municipality,PHR(IHLB)(PHR201008012,PHR201007101)the Postgraduate Science and Technology Foundation of Beijing University of Technology(ykj-2011-6371)
基金supported by the National Natural Science Foundation of China(U140319321473261+3 种基金41305112)the Excellent Youth Foundation of Xinjiang Uygur Autonomous Region(2013711004)the CAS "Light of West China" Program(YB201303)the CAS/SAFEA International Partnership Program for Creative Research Teams~~
文摘The controllable synthesis of tantalate K1.9Na0.1Ta2O6·2H2O has been successfully achieved by a two-step technique,namely,the molten salt and hydrothermal methods,at a low temperature. By simply varying the KOH concentration in the hydrothermal process,K1.9Na0.1Ta2O6·2H2O particles with spherical,cuboctahedral,and durian-like morphologies were synthesized. The photocatalytic activity of the obtained samples for the degradation of rhodamine B was studied under ultraviolet light,which indicates that the photocatalytic properties of the samples are highly dependent on their morphologies. The K1.9Na0.1Ta2O6·2H2O nanospheres,with rough surfaces and the highest specific surface area,exhibit the best performance. The present work provides a unique approach for the controlled synthesis of tantalate photocatalysts,which are difficult to achieve through other synthetic approaches.
